(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
THK Rod End Bearings, Spherical Bearings（Main Body Material 1：Steel）
| Days to Ship |
|
|---|
-
Rod End, Female Thread Type PHS Type
THK
Highly rigid with superior abrasion and corrosion resistance.
The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.
[Features]
· Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.
· Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.Standard Price: MYR 38.58- Days to Ship: 2 Day(s) or more -
Rod End Male Threaded POS Type
THK
This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.
* The rod end shown in the photo is a representative product.
Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.Standard Price: MYR 35.60- Days to Ship: 2 Day(s) or more -
Rod End, Female Thread Type (Lubrication-Free) NHS-T Type
THK
An oil free type rod end that uses self-lubricating synthetic plastic formed between the steel holder and the spherical inner ring.
The gap on the sliding surface is minimized, allowing accurate link motion to be achieved.
[Features]
· NHS-T Type (oil free type)Standard Price: MYR 39.27- Days to Ship: 4 Day(s) or more -
Rod End Bearing, Standard Type, Model PB
THK
A highly rigid spherical bearing with superior corrosion and abrasion resistance. The sliding surface of the bearing can be thoroughly lubricated from the oil groove and lubrication hole on the outer ring.
Standard Price: MYR 36.92- Days to Ship: 4 Day(s) or more -
Rod End Male Threaded Type (Lubrication-free) NOS-T
THK
This model is an oil free type rod end that is basically the same as the female threaded model NHS-T, but has a male thread on the holder end.
Standard Price: MYR 35.60- Days to Ship: 4 Day(s) or more -
THK
The most widely used series in Japan. It is used for heavy loads since the spherical contact area has a large width.
The outer ring is split at two points to accommodate the inner ring.Standard Price: MYR 50.58- Days to Ship: 4 Day(s) or more -
THK
[Structure and Features]
· The spherical plain bearing is a self-aligning plain bearing designed for heavy loads. The inner and outer rings are made from high-carbon chromium bearing steel that is hardened, ground, phosphate-coated and seized with molybdenum disulfide (MoS2). The SA1 model can bear large radial loads and thrust loads in both directions. Furthermore, as it is highly impact resistant, the spherical plain bearing is most suited for low speed, heavy load rocking components such as the cylinder clevises or hinges of construction and civil engineering machinery, truck suspensions, and train bolster anchors.
[Types and Features]
· The SA1 model of the series is popular in Europe. The outer ring is split at one point and is narrower and thinner than the SB model, so it can be used in small spaces. Models with dust seals on both sides (SA1-UU) are also available. These seals are highly effective at keeping out dust.Standard Price: MYR 50.58- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Rod End Bearing Type 1 |
| Connecting Screw M |
| Spherical Bearing Type 1 |
| Main Body Material 1 |
| Connecting Thread Shape |
| Inner Dia. d(Ø) |
| Type (Details) |
| Connecting Thread Direction |
| Liner Material |
| Ball Material |
| Allowable Tilt Angle α(deg) |
| Lubrication Method |
|
|
|
|
|
|
| |
| Brand | THK | THK | THK | THK | THK | THK | THK |
| Product Series | |||||||
| CAD |
|
|
|
|
|
|
|
| Days to Ship | 2 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more |
| Rod End Bearing Type 1 | Standard | Standard | Standard | - | Standard | - | - |
| Connecting Screw M | M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 / M24 / M30 | M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 / M24 / M30 | M3 / M4 / M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 | - | M3 / M4 / M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 | - | - |
| Spherical Bearing Type 1 | - | - | - | Standard | - | Standard | Standard |
| Main Body Material 1 | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Connecting Thread Shape | Tapped | Threaded | Tapped | - | Threaded | - | - |
| Inner Dia. d(Ø) | - | - | - | 5 ～ 30 | - | 12 ～ 130 | 12 ～ 120 |
| Type (Details) | Rod End Bearings | Rod End Bearings | Rod End Bearings | Spherical Bearing | Rod End Bearings | Spherical Bearing | Spherical Bearing |
| Connecting Thread Direction | Right-hand Thread / Left-hand Thread | Right-hand Thread / Left-hand Thread | Right-hand Thread / Left-hand Thread | - | Right-hand Thread / Left-hand Thread | - | - |
| Liner Material | Special Copper Alloy | Special Copper Alloy | Resin | Special Copper Alloy | Resin | - | - |
| Ball Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Allowable Tilt Angle α(deg) | 8 ～ 10 | 8 ～ 10 | 8 ～ 10 | 8 ～ 10 | 8 ～ 10 | 3 ～ 5 | 4 ～ 8 |
| Lubrication Method | Lubrication | Lubrication | Oil Free | Lubrication | Oil Free | Lubrication | Lubrication |
Loading...
Configure
Specification/Dimensions
-
Rod End Bearing Type 1
-
Standard -
Link Ball L -
Link Ball Straight
-
-
Connecting Screw M
-
Spherical Bearing Type 1
-
Standard -
Flange Type, with 4 Holes -
With ball stud
-
-
Main Body Material 1
-
Connecting Thread Shape
- Threaded
- Tapped
-
Inner Dia. d(Ø)
-
Type (Details)
- Rod End Bearings
- Spherical Bearing
-
Connecting Thread Direction
- Right-hand Thread
- Left-hand Thread
-
Liner Material
-
Ball Material
-
Allowable Tilt Angle α(deg)
-
Lubrication Method
Narrow search by specifying Manufacturer
-
- MISUMI (3)
- THK (7)
- TRUSCO NAKAYAMA (4)
- CCVI (3)
- IKO (2)
- OZAK (2)
- HEATH & HEATHER (1)
- KOGANEI (1)
- SMC (1)
- ESCO (0)
- MINEBEA (0)
- STRUENING (0)
- OILES (0)
- IMAO (0)
CAD
-
- 2D
- 3D
Related Categories to Rod End Bearings, Spherical Bearings
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy