(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
THK Linear Actuator (Steel body)（With or w/o Motors：Not Provided (Installed by customers)）
| Days to Ship |
|
|---|
-
THK
A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.
Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.
It has become possible to significantly reduce design and assembly labor-hours.
[Features]
・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.
・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.
・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.
・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.Days to Ship: 44 Day(s) or more -
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tabDays to Ship: 49 Day(s) or more -
THK
A compact, high-rigidity and high-precision actuator with an integrated inner block consisting of an LM block and ball screw nut.
In addition, as the housing A/B serves as a support unit and the inner block serves as a table, it is possible to dramatically reduce the steps in designing and assembling.
[Features]
· Arranged to make contact at an angle of 45° such that the load is equal in 4 directions, enabling use in various positions.
· The linear guide is made of 4 rows of circular arced grooves for a highly rigid guide with no cracks.
· Changes to friction resistance due to changes in load are suppressed as far as possible, promoting high-accuracy feeding.
· The U-shaped cross-sectional outer rail improves rigidity against moment and torsion.
[Effects of Using Ball Retainer]
· The grease retention capacity has been improved, allowing long-term maintenance-free operation. (QZ Lubricator is attached to the ball screw.)
· Eliminates mutual friction between balls, reduces torque fluctuation and achieves excellent sliding performance.
· In addition, since the basic dynamic load rating of the LM guide and ball screw is higher than conventional products, it has a long service life.Days to Ship: 43 Day(s) or more -
THK
A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.
Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.
It has become possible to significantly reduce design and assembly labor-hours.
[Features]
・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.
・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.
・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.
・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.Days to Ship: 89 Day(s) or more -
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tabDays to Ship: 41 Day(s) or more -
THK
An actuator with a compact and high-stiffness structure that integrates an LM guide, ball screw, and support unit, making it ideal for high-precision positioning.
[Features]
・ In addition to the standard specifications, the manufacturer will semi-order 5 highly requested customs, and will promptly procure and ship after ordering.
[5 custom made]
・ Dowel holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products.
・ Positioning Metal Bolt: Install the positioning metal bolts for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor.
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover.
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance.
・ AFF grease for clean environment: Encloses clean environment-friendly grease (THK, AFF grease) to suppress dust generation.
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab.Days to Ship: 49 Day(s) or more -
THK
A compact, high stiffness, and highly accurate actuator with an integrated inner block consisting of an LM block and a ball screw nut.
Also, the housing A/B doubles as a support unit, and the inner block doubles as a table.
It has become possible to significantly reduce design and assembly labor-hours.
[Features]
・ Since it is arranged at a contact angle of 45° so that the load is equal in 4 directions, it can be used in any posture.
・ Since the straight guide section has a 4-row circular arc groove, there is no gap and highly stiff guidance can be obtained.
・ Changes in frictional resistance due to load fluctuations are minimized and follow high accurate feed.
・ The U-shaped cross-sectional outer rail improves stiffness against moments and twists.Days to Ship: 44 Day(s) or more -
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tabDays to Ship: 49 Day(s) or more -
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tabDays to Ship: 49 Day(s) or more -
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tabDays to Ship: 49 Day(s) or more -
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tabDays to Ship: 49 Day(s) or more -
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tabDays to Ship: 49 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Nominal (Height) |
| Accuracy |
| Lead(mm) |
| Table |
| Motor Mounting Orientation |
| Main Body, Peripheral Components |
| Cover |
| With or w/o Motors |
| Table Length L1(mm) |
| Grease |
| Ball Screw Shaft Dia.(Ø) |
| With or w/o Lubricant Unit |
| Table Width W1(mm) |
| Amplifier Voltage |
| With or w/o Retainer |
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Product Series | ||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship | 44 Day(s) or more | 49 Day(s) or more | 43 Day(s) or more | 89 Day(s) or more | 41 Day(s) or more | 49 Day(s) or more | 44 Day(s) or more | 49 Day(s) or more | 49 Day(s) or more | 49 Day(s) or more | 49 Day(s) or more | 49 Day(s) or more |
| Nominal (Height) | 46 | 45 | 20 | - | 46 | 26 | 33 | 30 | 20 | 20 | 26 | 33 |
| Accuracy | Standard Grade / High Grade / Precision Grade | Standard Grade | Standard Grade / High Grade / Precision Grade | Standard Grade / High Grade / Precision Grade | Standard Grade | Standard Grade | Standard Grade / High Grade / Precision Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade |
| Lead(mm) | 10 ～ 20 | 10 ～ 20 | 1 ～ 6 | - | 10 ～ 20 | 2 ～ 6 | 6 ～ 10 | 6 ～ 10 | 1 ～ 6 | 1 ～ 6 | 2 ～ 6 | 6 ～ 20 |
| Table | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 1 pc. / Long 2 pcs. | - | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 1 pc. / Long 2 pcs. | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs | Long 1 pc. / Long 2 pcs. | Long 1 pc. / Long 2 pcs. | Long 1 pc. / Long 2 pcs. | Long 1 pc. / Long 2 pcs. / Short 1 pcs / Short 2 pcs |
| Motor Mounting Orientation | - | Straight / Folded | Straight | - | Straight / Folded | Straight / Folded | - | Straight / Folded | Straight / Folded | Straight / Folded | Straight / Folded | Straight / Folded |
| Main Body, Peripheral Components | Main Body | Main Body | Main Body | - | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Cover | - | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | - | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided |
| With or w/o Motors | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) | Not Provided (Installed by customers) |
| Table Length L1(mm) | - | 43.5 ～ 108 | 33.2 | - | 48 ～ 110 | 47.4 ～ 64 | - | 39.5 ～ 74.4 | 33.2 ～ 46 | 33.2 ～ 46 | 47.4 ～ 64.2 | 39.5 ～ 76 |
| Grease | Standard | Standard / Low Particle Generation | Standard | - | Standard / Low Particle Generation | Standard / Low Particle Generation | Standard | Standard / Low Particle Generation | Standard / Low Particle Generation | Standard / Low Particle Generation | Standard / Low Particle Generation | Standard / Low Particle Generation |
| Ball Screw Shaft Dia.(Ø) | 15 | 15 | 6 | - | 15 | 8 | 10 | 10 | 6 | 6 | 8 | 13 |
| With or w/o Lubricant Unit | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Table Width W1(mm) | - | 53 ～ 104 | 52 | - | 54.4 ～ 112 | 31 ～ 62 | - | 38 ～ 80 | 23 ～ 52 | 23 ～ 52 | 31 ～ 62 | 37.4 ～ 86 |
| Amplifier Voltage | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| With or w/o Retainer | Provided | Not Provided | Provided | - | Provided | Not Provided | Provided | Not Provided | Provided | Not Provided | Provided | Provided |
Loading...
Configure
Specification/Dimensions
-
Nominal (Height)
-
Accuracy
-
Lead(mm)
-
Table
-
Motor Mounting Orientation
-
Main Body, Peripheral Components
- Main Body
- Peripheral Components
-
Cover
-
With or w/o Motors
-
Table Length L1(mm)
-
Grease
-
Ball Screw Shaft Dia.(Ø)
-
With or w/o Lubricant Unit
-
Table Width W1(mm)
-
Amplifier Voltage
-
With or w/o Retainer
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Linear Actuator (Steel body)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy