(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
THK Standard Linear Guides（Retainer：N/A）
| Days to Ship |
|
|---|
-
![[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461747_001.jpg?$product_view_b$)
[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type
THK
An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.Standard Price: MYR 368.65- Days to Ship: 4 Day(s) or more -
Full-Ball Type LM Guide, International Standard, HSR Type
THK
A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.Days to Ship: 38 Day(s) or more -
Full-Ball Type LM Guide, Radial Type, SR Model
THK
A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
· The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
· It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
· LM block, LM rail, and LM rail are all compatible with stainless steel.Days to Ship: 7 Day(s) or more -
[Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type
THK
A best selling THK product. The HSR series can be used in any position.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.Days to Ship: 6 Day(s) or more -
![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_b$)
[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type
THK
An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled
· in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.Standard Price: MYR 416.83- Days to Ship: 4 Day(s) or more -
Full-Ball Type LM Guide Wide Rail HRW Type
THK
A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.Days to Ship: 7 Day(s) or more -
Miniature Full-Ball Type LM Guide SRS-G Type
THK
Lightweight and compact structure.
[Features]
· The LM block is designed to ensure rigidity within a limited space.
· Combining with large diameter balls can provide rigidity in each direction.
· Capable of receiving loads in all directions, and a single-rail guide can adequately operate under a small moment load.
· Despite its compact-size, it is a finite stroke type of cross roller guide and ball slide.
· A highly reliable and compact linear motion system with no problematic cage misalignment.
· LM block, LM rail, and ball are all compatible with stainless steel.Days to Ship: 19 Day(s) or more -
Full-Ball Type LM Guide for High Temperatures Model HSR-M1
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.- CAD ：
- 2D
Days to Ship: 38 Day(s) or more -
![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](//my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_b$)
[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model
THK
[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model
These slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
[Feature]
● Block Type : Wide Block
● Applicable for Rail Type : Wide Rail
● Accuracy Grade : Standard Grade
● Number of Block Mounting Holes : 4 or 6
● Mounting Hole Dimension : M5, M6 and M8
● Material: Carbon Steel and Stainless Steel
[Application]
It is used in a THK LM Guide HRW Series.Standard Price: MYR 820.96- Days to Ship: 4 Day(s) or more -
Full-Ball Type LM Guide, Low Floor Wide Rail HRW Type
THK
Wide rail width and low center of gravity. It has a lower profile than HSR and is suitable for designs that require Mc moment rigidity.
[Features]
・ The balls roll on the 4 rows of rolling surfaces that have been precision ground on the LM rail and LM block, and the end plates incorporated in the LM block circulate the ball rows.
・ Compact heavy load: Since the number of effective balls is large, high rigidity can be obtained in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
In addition, since the rail has a large second moment of inertia, it has high lateral rigidity and does not require lateral reinforcement, etc.
・ Automatic adjustment ability: The unique front face combination (DF set) of the circular arc groove has the effect of automatic adjustment, which can absorb the mounting error even if a preload is applied, resulting in highly accurate and smooth linear motion.Days to Ship: 6 Day(s) or more
![[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461747_001.jpg?$product_view_b$)
![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_b$)
![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Rail Length L(mm) |
| Block Type(mm) |
| Rail Width(mm) |
| Mounting Height H(mm) |
| Nominal Part Number |
| Rail Type |
| Set / Single Item |
| Preload(N・m) |
| Accuracy(N・m) |
| Material |
| Ball Arrangement |
| No. of Blocks(mm) |
| Retainer |
| Block Mounting Hole Pitch (Width Direction)(mm) |
| Block Mounting Hole Pitch (Length Direction)(mm) |
| Block Mounting Hole Diameter |
| Rail Mounting Hole Pitch(mm) |
| Rail Mounting Hole Diameter |
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Product Series | [Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type | [Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type | [Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type | [Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model | ||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 4 Day(s) or more | 38 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 19 Day(s) or more | 38 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more |
| Rail Length L(mm) | - | 25 ～ 3000 | 47 ～ 3000 | 73 ～ 3000 | - | 38 ～ 3000 | 32 ～ 2000 | 67 ～ 1500 | - | - |
| Block Type(mm) | Standard / Wide | Standard / Wide | Standard / Short / Wide / Wide Short | Standard / Wide | Standard / Wide | Wide | Standard / Wide | Standard | Wide | Wide |
| Rail Width(mm) | - | 8 ～ 63 | 15 ～ 70 | 15 ～ 34 | - | 18 ～ 120 | 9 ～ 42 | 15 ～ 28 | - | 18 ～ 69 |
| Mounting Height H(mm) | - | 11 ～ 90 | 24 ～ 85 | 24 ～ 55 | - | 12 ～ 60 | 10 ～ 25 | 28 ～ 45 | - | 12 ～ 35 |
| Nominal Part Number | 15 ～ 35 | 8 ～ 65 | 15 ～ SR70 | 15 ～ 35 | 15 ～ 35 | 12 ～ 60 | 9W ～ 25 | 15 ～ 30 | 17 ～ 35 | 12 ～ 35 |
| Rail Type | Standard | Standard | Standard | Standard | Standard | Wide | Standard / Wide | Standard | Wide | Wide |
| Set / Single Item | Block Only | Set | Set | Set | Block Only | Set | Set | Set | Block Only | Set |
| Preload(N・m) | Standard | Standard / Light Preload / Medium Preload | Standard / Light Preload / Medium Preload | Standard | Standard | Standard / Light Preload / Medium Preload | Standard / Light Preload | Standard / Light Preload / Medium Preload | Standard | - |
| Accuracy(N・m) | Standard Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | Standard Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | - |
| Material | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Stainless Steel | Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel |
| Ball Arrangement | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | Standard | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular |
| No. of Blocks(mm) | 1 | 1 ～ 9 | 1 ～ 9 | 1 ～ 9 | 1 | 1 ～ 9 | 1 ～ 9 | 1 ～ 9 | 1 | - |
| Retainer | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Block Mounting Hole Pitch (Width Direction)(mm) | 26 ～ 82 | 10 ～ 142 | 26 ～ 90 | 26 ～ 82 | 26 ～ 82 | 21 ～ 180 | 15 ～ 45 | 11.5 ～ 40 | 29 ～ 107 | 21 ～ 107 |
| Block Mounting Hole Pitch (Length Direction)(mm) | 26 ～ 72 | 10 ～ 120 | 26 ～ 90 | 26 ～ 72 | 26 ～ 50 | 12 ～ 80 | 10 ～ 35 | 18 ～ 60 | 15 ～ 60 | 12 ～ 60 |
| Block Mounting Hole Diameter | 4 ～ 10 | 2 ～ 16 | 4 ～ 16 | 4 ～ 10 | 4 ～ 9 | 3 ～ 10.5 | 3 ～ 6 | 4 ～ 8 | 3.3 ～ 8 | 3 ～ 8 |
| Rail Mounting Hole Pitch(mm) | 60 ～ 80 | 20 ～ 150 | 60 ～ 150 | 60 ～ 80 | 60 ～ 80 | 40 ～ 105 | 20 ～ 60 | 60 ～ 80 | 40 ～ 80 | 40 ～ 80 |
| Rail Mounting Hole Diameter | 4.5 ～ 9 | 2.4 ～ 18 | 3.5 ～ 18 | 4.5 ～ 9 | 3.5 ～ 9 | 4.5 ～ 11 | 3.5 ～ 7 | 4.5 ～ 9 | 4.5 ～ 7 | 4.5 ～ 7 |
![[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461747_001.jpg?$product_view_c$)
![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_c$)
![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](http://my.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Rail Length L(mm)
- 25
- 35
- 39
- 40
- 45
- 50
- 55
- 70
- 75
- 80
- 85
- 95
- 100
- 110
- 115
- 120
- 130
- 135
- 140
- 145
- 150
- 155
- 160
- 170
- 175
- 190
- 195
- 200
- 205
- 215
- 220
- 230
- 235
- 245
- 250
- 255
- 260
- 265
- 270
- 275
- 280
- 290
- 295
- 310
- 315
- 320
- 335
- 340
- 345
- 350
- 355
- 360
- 370
- 375
- 390
- 395
- 400
- 415
- 420
- 430
- 435
- 440
- 445
- 455
- 460
- 470
- 475
- 495
- 510
- 515
- 520
- 535
- 545
- 550
- 555
- 570
- 575
- 580
- 590
- 595
- 600
- 615
- 620
- 630
- 635
- 640
- 645
- 670
- 680
- 695
- 700
- 710
- 720
- 745
- 750
- 760
- 770
- 790
- 795
- 820
- 830
- 840
- 845
- 870
- 880
- 895
- 910
- 920
- 940
- 945
- 950
- 970
- 990
- 1000
- 1060
- 1080
- 1120
- 1160
- 1180
- 1240
- 1300
- 1320
- 1360
- 1400
- 1420
- 1480
- 1540
- 1560
- 1600
- 1640
- 1660
- 1720
- 1780
- 1800
- 1840
- 1880
- 1900
- 1960
[25-3000/1mm Unit(s)]
-
Block Type(mm)
-
Standard -
Short -
Wide -
Wide Long -
Long -
Extra Long -
Wide Short
-
-
Rail Width(mm)
-
Mounting Height H(mm)
-
Nominal Part Number
-
Rail Type
-
Standard -
Wide
-
-
Set / Single Item
- Set
- Block Only
- Rail Only
-
Preload(N・m)
- Standard
- Light Preload
- Medium Preload
- Clearance
- Heavy Preload
See the accuracy standard of each manufacturer.
-
Accuracy(N・m)
- Standard Grade
- High Grade
- Precision Grade
- High Precision Grade
- Ultra Precision Grade
See the accuracy standard of each manufacturer.
-
Material
-
Ball Arrangement
-
No. of Blocks(mm)
-
Retainer
-
Block Mounting Hole Pitch (Width Direction)(mm)
-
Block Mounting Hole Pitch (Length Direction)(mm)
-
Block Mounting Hole Diameter
-
Rail Mounting Hole Pitch(mm)
-
Rail Mounting Hole Diameter
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Standard Linear Guides
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy