(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
THE_CUT Chamfering / Centering Tools（Application：Hole Chamfer）
Search by specifying the lower class category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Days to Ship |
|
|---|
-
Chamfering Cutter Super Mentori-Maru MTMS 20/30
THE_CUT
[Features]
· Can be used like an end mill for machining materials from an un-machined state.
· Capable of ramping machining (α = 3°).
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute/4-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used.
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· The insert allows for chamfering up to C7. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.Standard Price: MYR 1,891.46- Days to Ship: 7 Day(s) or more -
Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V
THE_CUT
[Features]
· No need to turn over the work material. (Also removes through-hole burrs)
· Both sides can be chamfered with the one cutter tool.
· Ultra-fine particle carbide with TiAlN coating for a longer tool life.Standard Price: MYR 886.48- Days to Ship: 11 Day(s) or more -
Point Set Drill, Carbide C-NC-PSD
THE_CUT
[Features]
· Allows for machining at higher speeds and a significantly longer tool life than with a high speed steel (TiAlN) point set drill.Standard Price: MYR 219.98- Days to Ship: 11 Day(s) or more -
Chamfering Cutter 90°, 3 Flutes, TiN Coat, CSQ-G
THE_CUT
[Features]
· The tool life is drastically improved through the use of 3 flutes and a TiN coating.
· No chatter.
· Capable of true circular machining.Standard Price: MYR 205.26- Days to Ship: 5 Day(s) or more -
Double Sided Chamfering Cutter 45° DFC
THE_CUT
[Features]
· Capable of V-grooving both front and back surfaces as well as the side surfaces.
· Capable of chamfering up to C2.8 for front chamfering.
· The use of a dedicated insert (4 cutting edges) delivers high precision machining.Standard Price: MYR 1,200.20- Days to Ship: 11 Day(s) or more -
THE_CUT
[Features]
· A standard throw-away type capable of machining that previously was only possible with fabricated burnishing types or brazed type cutters.
· Consolidates all the steps; from seat machining to the R machining of the top surface to the counterboring of each screw.
· Requires no regrinding/repolishing, significantly reducing tool costs and running costs.Standard Price: MYR 2,574.03- Days to Ship: 11 Day(s) -
Dedicated Insert For Double Face Cutter, MT-SDM/H
THE_CUT
Dedicated insert MT-SDM/H for THE CUT replaceable insert double-face chamfer tool.
Standard Price: MYR 73.86- Days to Ship: 11 Day(s) or more -
General Purpose Chamfering Cutter Kiremen MTMB
THE_CUT
[Features]
· The dedicated insert and original body design provide excellent sharpness with no chatter.
· Uses special steel for the body, ensuring excellent wear resistance and outstanding durability.
· Good engagement and centripetal force enabling easy drilling press work.
· A type in which the insert can be interchanged so no regrinding/repolishing required. Has lower running costs than countersink types.
· The insert comprises of a carbide base material for a longer tool life. As 3 cutting edges can be used, it is also economical.Standard Price: MYR 644.73- Days to Ship: 11 Day(s) or more -
THE_CUT
[Features]
· Capable of spot cutting.
· A type in which the insert can be interchanged so no regrinding/repolishing required.
· Features a highly rigid body and dedicated insert for high-efficiency machining.
· Can be used like an end mill for machining materials from an un-machined state.
· Positioning precision is further increased for nose R0.4.Standard Price: MYR 827.98- Days to Ship: 7 Day(s) or more -
Super Mentori-Maru ZERO For Automatic Lathes, MTMS
THE_CUT
[Features]
· Employs shank diameters of ø7 and ø10 specialized for automatic lathes.
· Capable of spot cutting.
· Dedicated insert for nose R0.4 further improves positioning precision.
· A type in which the insert can be interchanged so no regrinding/repolishing required.Standard Price: MYR 827.98 Days to Ship: 11 Day(s) or more -
Chamfering Cutter Super Mentori-Maru MTMS 6.5/9
THE_CUT
[Features]
· Uses a positive lathe insert for a light cutting sharpness.
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used (however, the screws need to be changed).
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· With the insert, the MTMS9 is capable of machining up to C7 and the MTMS6.5 up to C4.5. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.
· Can be used like an end mill for machining materials from an un-machined state.·Standard Price: MYR 1,279.96 Days to Ship: 10 Day(s) or more -
Super Mentori-Maru ZERO For Lathes, NC-MT
THE_CUT
[Features]
· An internal lubrication specification and shank design specialized for use with a lathe.
· Capable of spot cutting.
· A type in which the insert can be interchanged so no regrinding/repolishing required.
· Features a highly rigid body and dedicated insert for high-efficiency machining.Standard Price: MYR 1,271.33 Days to Ship: 11 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT | THE_CUT |
| Product Series | Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V | |||||||||||
| Days to Ship | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 11 Day(s) or more | 11 Day(s) | 11 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 10 Day(s) or more | 11 Day(s) |
| Tool Material Type | - | Carbide | Carbide | High-speed steel | - | - | Carbide | - | - | - | - | - |
| Tool Diameter (D)(mm) | - | 2.8 ～ 12 | 3 ～ 10 | 6.3 ～ 31 | 11 ～ 20 | - | - | Max: 25, Min: 4.2 ～ Max: 41, Min: 20 | 12 ～ 15.2 | 13 | - | 12 ～ 14.5 |
| Tip angle (θ) | - | 90° | 90 | 90 | - | - | - | - | - | - | - | - |
| Application | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer |
| work material | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | - | - | - | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | - |
| Single blade, two blades | - | Single blade | Single blade | Single blade | - | - | - | - | - | - | - | - |
| Peripheral Blade Y/N | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating Y/N | - | Available | NA | Available | - | - | Available / NA | - | - | - | - | - |
| Coating Type | - | TiAlN | - | TiN | - | - | TiAlN | - | - | - | - | - |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1～6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2~5
- 2～10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3～14
- 3～15
- 3.1
- 3.15
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.4
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.5
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Manufacturer
-
- MISUMI (28)
- YAMAWA MFG (58)
- IWATA TOOL (30)
- MAKOTOLOY (22)
- GUHRING (20)
- OSG (18)
- ILIX (12)
- THE_CUT (12)
- EIKOSHA (8)
- DAISHOWASEIKI (5)
- Nine9 (5)
- TAIYO-TOOL (5)
- FUKUDA (4)
- OKAZAKI SEIKO (4)
- TRUSCO NAKAYAMA (4)
- DIXI (3)
- SANKO MFG (3)
- FUJIGEN (2)
- RUKO (2)
- 7 LEADERS (1)
- ASAHI TOOLS (1)
- NIKKENKOSAKU (1)
- SPEED TIGER (1)
- SKC (1)
- UNION TOOL (1)
- RYOCO SEIKI (0)
- OKABE (0)
- ESCO (0)
- STAR-M (0)
- KYOWA SEIKO (0)
- ATI (0)
- SANDVIK (0)
- MAPAL (0)
- ALPEN (0)
- DAIICHITOOL (0)
- NOGA_JAPAN (0)
- DIJET (0)
- ATOM (0)
- NS TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Chamfering / Centering Tools
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy