(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
SUPER TOOL Knurled（Machining Diameter：10～250）
| Days to Ship |
|
|---|
-
Rolled Auto-slide Knurled Holder (For Crossed Lines) KHS
SUPER TOOL
[Features]
・ For domestic standard knurling pieces diamond pattern
・ With knurling holding part initial position setting mechanism
・ Since the initial position is clearly visible, it can be easily installed on automatic lathes and NC lathes
・ The misalignment can be automatically adjusted by the automatic slide mechanism
・ Alignment range is ±2.5 mm opposite the initial position
・ The "auto slide knurling holder" moves the knurling piece holding part up and down to eliminate the difference in rolling force generated between the 2 knurling pieces, enabling knurling processing with a uniform groove depth
・ This is a holder for rolling type knurling diamond pattern.
[Applications]
・ Applicable models: KNSStandard Price: MYR 1,337.64 Days to Ship: 9 Day(s) -
Form Rolling Knurling Tool Holder (for Straight Knurling)
SUPER TOOL
[Features]
・ For Japanese standard straight knurling pieces
・ Rolling type knurling parallel holder
・ With knurling holding part initial position setting mechanism
・ The automatic aligning (±2.5 mm relative to the initial position) by the upper and lower auto slide mechanism eliminates the rolling force generated in the 2 knurling pieces, enabling knurling with a uniform groove depth
[Applications]
・ Applicable models: KNSStandard Price: MYR 477.28 Days to Ship: 1 Day(s) -
Form Rolling Knurling Tool Holder (for Edge Machining and Diamond Knurling)
SUPER TOOL
[Features]
· Resolves knurl processing up to the edge of the stepped workpiece.
· Holder for rolled type diamond knurled processing.
[Applications]
· Knurling.Standard Price: MYR 3,657.63 Days to Ship: 9 Day(s) or more -
Form Rolling Knurling Tool Holder (for Edge Machining and Straight Knurling)
SUPER TOOL
[Features]
· Resolves knurl processing up to the edge of the stepped workpiece.
· Holder for rolled type straight knurled processing.
· Titanium coated.
[Applications]
· Knurling.Standard Price: MYR 2,426.13 Days to Ship: 10 Day(s) -
Rolled auto-slide knurled holder (for iris eyes)
SUPER TOOL
[Features]
· With initial position setting mechanism for knurled retaining parts. Auto-centering based on vertical auto-slide mechanism (±2.5 mm from initial position) eliminates differences in rolling force generated with two knurled wheels to allow for knurled processing at an even groove depth.
· Holder for rolled type diamond knurled processing.
[Applications]
· Applicable model: shank diameter: 20 x 20 mm.Standard Price: MYR 1,386.65- Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Width×Height×Length(mm) |
| Machining Diameter(mm) |
| Pitch(mm) |
| Outer Diameter(mm) |
| Hole Diameter(mm) |
| Width(mm) |
|
|
|
|
| |
| Brand | SUPER TOOL | SUPER TOOL | SUPER TOOL | SUPER TOOL | SUPER TOOL |
| Product Series | Form Rolling Knurling Tool Holder (for Edge Machining and Diamond Knurling) | Form Rolling Knurling Tool Holder (for Edge Machining and Straight Knurling) | |||
| Days to Ship | 9 Day(s) | 1 Day(s) | 9 Day(s) or more | 10 Day(s) | 9 Day(s) |
| Product Type | Holder | Holder | Holder | Holder | Holder |
| Width×Height×Length(mm) | 20×20×147 | 20×20×147 | 20×20×151.5 ～ 25×25×151.5 | 20×20×136.5 ～ 25×25×136.5 | 20×16×130 ～ 20×20×147 |
| Machining Diameter(mm) | 10～250 | 10～250 | 10～250 | 10～250 | 10～250 |
| Pitch(mm) | - | - | - | - | - |
| Outer Diameter(mm) | - | - | - | - | - |
| Hole Diameter(mm) | - | - | - | - | - |
| Width(mm) | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Type
- Holder
- Piece
-
Width×Height×Length(mm)
-
Machining Diameter(mm)
-
Pitch(mm)
-
Outer Diameter(mm)
-
Hole Diameter(mm)
-
Width(mm)
Narrow search by specifying Manufacturer
-
- SUPER TOOL (5)
CAD
-
- 2D
- 3D
Related Categories to Knurled
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy