(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
SUMITOMO_ELEC_ Inserts (for Milling)（Shape (initial letter of model number)：S (Square)）
| Days to Ship |
|
|---|
-
Used for SEC-Ace Mill, FPG Model SDKN-MT
SUMITOMO_ELEC_
[Applications]Can be used for machining steel and stainless steel. [Features]Cermet, cemented carbide, and CVD coated materials are used.
Standard Price: MYR 29.65- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WGC Model SEMT13T3AG□N-□
SUMITOMO_ELEC_
Manufactured by Sumitomo Electric Hardmetal.
The optimized shape and tough material provide both cutting performance and strength at a high level.Standard Price: MYR 32.27- Days to Ship: 4 Day(s) or more -
Used for SEC-DNX Type SNMT13T6ANER-□
SUMITOMO_ELEC_
Higher strength than single surface cutters. Economical with twice the corners thanks to double-sided use.
Standard Price: MYR 59.37- Days to Ship: 4 Day(s) or more -
Used for SEC-Sumi UFO Mill, UFO Model SFEN12T3AZ□N
SUMITOMO_ELEC_
[Features]
·Suitable for general purpose, high speed, rough and light cutting.
Grade: cemented carbide, coating, CermetStandard Price: MYR 49.67- Days to Ship: 4 Day(s) or more -
Used for SEC-Sumi UFO Mill, UFO Model SFEN1504AZ□N
SUMITOMO_ELEC_
[Features]
·Highest abrasion resistance grade and suitable high speed continuous cutting.
Grade: cemented carbide, coating, CermetStandard Price: MYR 61.22- Days to Ship: 4 Day(s) or more -
Used for SEC-Sumi UFO Mill, UFO Model SFKR12T3AZEN
SUMITOMO_ELEC_
[Features]
·Suitable for general-purpose, high speed, and light cutting.
Thickness (mm): 3.97
Cutting edge length: 12
Relief angle: F (25°)Standard Price: MYR 49.67- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WGC Model SEET0903AG□N-□
SUMITOMO_ELEC_
[Features]
·The optimized shape and strong material provide high sharpness and strength.
·A wide variety of insert items are available to meet diverse needs.Standard Price: MYR 31.52- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WGC Model SEET13T3AG□N-□
SUMITOMO_ELEC_
Manufactured by Sumitomo Electric Hardmetal.
The optimized shape and tough material provide both cutting performance and strength at a high level.Standard Price: MYR 38.94- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WGC Model SEMT0903AG□N-□
SUMITOMO_ELEC_
[Features]
·The optimized shape and strong material provide high sharpness and strength.
Relief angle: E (20°)
Thickness (mm): 3.18Standard Price: MYR 25.95- Days to Ship: 4 Day(s) or more -
SEC-Wave Mill For WGX Type Insert
SUMITOMO_ELEC_
[Features]
·The wiper edge shape improves surface roughness, and the large rake angle and cutting edge rake angle improve sharpness.Standard Price: MYR 38.94- Days to Ship: 3 Day(s) or more -
SUMITOMO_ELEC_
This cast iron cutter allows for the use of both sides of the insert.
For general turning of cast iron and steel.Standard Price: MYR 42.23 Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
[Applications]It can be used for machining steel, cast iron, stainless steel, and difficult-to-cut materials. [Features]Cermet and cemented carbide are used.
Standard Price: MYR 41.56- Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
This cast iron cutter allows for the use of both sides of the insert.
For general turning of cast iron and steel.Standard Price: MYR 62.66- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, APG Model SDCH-TR
SUMITOMO_ELEC_
This cutter for light alloys offers outstanding sharpness.
For general cutting of light alloys and mild steel.Standard Price: MYR 36.32- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, APG Model SDC-L
SUMITOMO_ELEC_
This cutter for light alloys offers outstanding sharpness.
For general cutting of light alloys and mild steel.Standard Price: MYR 53.37- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, APG Model SDC-R
SUMITOMO_ELEC_
An insert for ace mills.
[Shape]S (square) "relief angle" D (15°)Standard Price: MYR 53.37- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, APG Model SDC-TR
SUMITOMO_ELEC_
This cutter for light alloys offers outstanding sharpness.
For general cutting of light alloys and mild steel.Standard Price: MYR 53.37- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, DNF Model SNC-MW
SUMITOMO_ELEC_
It provides a beautifully finished surface with an arc wiper edge.
For high feed finishing of cast iron.
[Grade]Carbide AlloyStandard Price: MYR 58.94 Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, DPG Model SPCH-L
SUMITOMO_ELEC_
This product has a positive cutting edge shape and can be used for a variety of work materials.
For general cutting of steel, cast iron, and stainless steel.Standard Price: MYR 29.65- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, DPG Model SPCH-R
SUMITOMO_ELEC_
This product has a positive cutting edge shape and can be used for a variety of work materials.
For general cutting of steel, cast iron, and stainless steel.Standard Price: MYR 29.65- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, DPG Model SPCH-TL
SUMITOMO_ELEC_
This product has a positive cutting edge shape and can be used for a variety of work materials.
For general cutting of steel, cast iron, and stainless steel.Standard Price: MYR 29.65- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, DPG Model SPCH-TR
SUMITOMO_ELEC_
This product has a positive cutting edge shape and can be used for a variety of work materials.
For general cutting of steel, cast iron, and stainless steel.Standard Price: MYR 29.65- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, EHG Model SECN-M
SUMITOMO_ELEC_
Lightweight and compact, suitable for machining centers.
For cutting general-purpose and difficult-to-cut materials.Standard Price: MYR 62.66 Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, EHG Model SEEN-MT
SUMITOMO_ELEC_
Lightweight and compact, suitable for machining centers.
For cutting general-purpose and difficult-to-cut materials.Standard Price: MYR 40.80 Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, EHG Model SEKN-MT
SUMITOMO_ELEC_
Lightweight and compact, suitable for machining centers.
For cutting general-purpose and difficult-to-cut materials.Standard Price: MYR 29.65- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, EHG Model SEMR-AFEN
SUMITOMO_ELEC_
Lightweight and compact, suitable for machining centers.
For cutting general-purpose and difficult-to-cut materials.Standard Price: MYR 27.38- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, FPG Model SDEX-MT
SUMITOMO_ELEC_
A general-purpose cutter with a fine clear blade shape.
For cutting general-purpose and difficult-to-cut materials.Standard Price: MYR 32.62- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, FPG Model SDKN-M
SUMITOMO_ELEC_
[Applications]It can be used for machining steel, cast iron, stainless steel, and difficult-to-cut materials. [Features]Cemented carbide, SUMIDIA, and CVD coated materials are used.
Standard Price: MYR 29.65- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, FPG Model SDMR-AEEN
SUMITOMO_ELEC_
A general-purpose cutter with a fine clear blade shape.
For cutting general-purpose and difficult-to-cut materials.Standard Price: MYR 27.38- Days to Ship: 4 Day(s) or more -
Used for SEC-Ace Mill, FPG Model SDMR-AETN
SUMITOMO_ELEC_
A general-purpose cutter with a fine clear blade shape.
For cutting general-purpose and difficult-to-cut materials.Standard Price: MYR 27.38 Days to Ship: 4 Day(s) or more -
Used for SEC-High Feed Cutter, DPV Model SDCN-L
SUMITOMO_ELEC_
For high feed semi-finishing of cast iron.
● Shape: square
● Relief angle: D (15°)
● Work material: Cast Iron
● Grade: Carbide Alloy
● Compatible machining: general purpose cuttingStandard Price: MYR 66.03 Days to Ship: 4 Day(s) or more -
Used for SEC-High Feed Cutter, DPV Model SDCN-R
SUMITOMO_ELEC_
For high feed semi-finishing of cast iron.
● Shape: square
● Relief angle: D (15°)
● Work material: Cast Iron
● Grade: Carbide Alloy
● Compatible machining: general purpose cuttingStandard Price: MYR 66.03- Days to Ship: 4 Day(s) or more -
For Aluminum High-Speed Cutter RF4000 SNEW-ADFR-WS
SUMITOMO_ELEC_
[Applications]It can be used for rough cutting, general-purpose cutting, and high-speed and light cutting. [Features]Cemented carbide, SUMIDIA, and SUMICRYSTAL materials are used.
Standard Price: MYR 61.78- Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
For high feed finishing of cast iron.
● Work material: Cast Iron
● Grade: Carbide Alloy
● Compatible machining: general purpose cuttingStandard Price: MYR 92.03- Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip SDNN-AETN
SUMITOMO_ELEC_
A general-purpose cutter with a fine clear blade shape.
[Applications]
Used for cutting general-purpose and difficult-to-cut materials.Standard Price: MYR 26.50- Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip SFEN12T3AZ□N
SUMITOMO_ELEC_
For general-purpose cutters with ultra-high rake blade shape.
[Applications]
Used for cutting general-purpose and difficult-to-cut materials.Standard Price: MYR 46.93- Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip SNMT-ZNEN-G
SUMITOMO_ELEC_
An insert for high-efficiency machining of cast iron and cast steel.
[Specifications]Relief angle: N (0°)
Shape: S (square)Standard Price: MYR 46.93 Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip SOMT-PDER-G
SUMITOMO_ELEC_
[Applications]It can be used for machining steel, cast iron, stainless steel, and difficult-to-cut materials. [Features]It is coated and uses a cermet material.
Standard Price: MYR 46.93 Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip SPMT
SUMITOMO_ELEC_
This cutter with a ball handle for three-dimensional profiling can be used for the rough machining of molds and machine parts.
A long type for rough machining.
[Applications]
It is used for three-dimensional profiling rough machining.Standard Price: MYR 32.07- Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip SPMT-T
SUMITOMO_ELEC_
[Features]
This cutter with a ball handle for three-dimensional profiling can be used for the rough machining of molds and machine parts.Standard Price: MYR 38.74 Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WGC Model SEMT13T3AG-N-□
SUMITOMO_ELEC_
[Specifications]
· Shape: Insert (for Milling), S (Square)
· Applicable Cutter: WGC4000/WGCF4000 Models
· Cutting Edge Shape: Negative Land + Round HoningStandard Price: MYR 32.86- Days to Ship: 5 Day(s) or more -
SEC-Wave Mill For WFXF 12000R(S) Type Insert
SUMITOMO_ELEC_
Sumitomo Electric Hard Metal Tips (for Milling) SEC-Wave Mill WFXF 12000R (S) Type Tips.
Standard Price: MYR 44.73- Days to Ship: 8 Day(s) or more -
SEC-Wave Mill for WFXF 08000R(S) Type Insert
SUMITOMO_ELEC_
[Features]
The optimized insert cutting edge shape and high precision technology provide superb machined surface quality.
[Applications]
Used for shoulder milling of steel, stainless steel, die steel, cast iron, and non-ferrous metals.Standard Price: MYR 34.27- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape (initial letter of model number) |
| work material |
| Clearance angle |
| Available corners |
| Data for CAM / Tool Management Software |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more |
| Shape (initial letter of model number) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) |
| work material | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Cast Iron | Steel / Cast Iron | Steel / Cast Iron / High Hardness Material | Steel | Cast Iron / Non-ferrous metal | Cast Iron / Non-ferrous metal | Steel | Cast Iron | Cast Iron | Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron | Steel | Steel | Cast Iron | Steel / Stainless Steel | Steel | Cast Iron | Cast Iron | Non-ferrous metal | Cast Iron | Steel / Stainless Steel | Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Cast Iron | Cast Iron / Non-ferrous metal | Cast Iron / Non-ferrous metal |
| Clearance angle | D(15°） | E(20°） | N(0°） | F(25°） | F(25°） | F(25°） | E(20°） | E(20°） | E(20°） | E(20°） | N(0°） | N(0°） | N(0°） | D(15°） | D(15°） | D(15°） | D(15°） | N(0°） | P (11°) | P (11°) | P (11°) | P (11°) | E(20°） | E(20°） | E(20°） | E(20°） | D(15°） | D(15°） | D(15°） | D(15°） | D(15°） | D(15°） | D(15°） / N(0°） | N(0°） | D(15°） | F(25°） | N(0°） | Other | P (11°) | P (11°) | E(20°） | Other | Other |
| Available corners | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Data for CAM / Tool Management Software | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape (initial letter of model number)
- O (Regular octagon)
- P (Regular pentagon)
- S (Square)
- T (Equilateral Triangle Type)
- C (80° Diamond-Shape)
- E (75°Diamond Shape)
- A (85° parallelogram)
- B (82° Parallelogram)
- L (Rectangular)
- W (Hexagonal Type)
- R (Circular)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Clearance angle
- C(7°）
- P (11°)
- D(15°）
- E(20°）
- F(25°）
- N(0°）
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 5
- 6
- 8
- Other
-
Data for CAM / Tool Management Software
- zoller
Narrow search by specifying Manufacturer
-
- MISUMI (2)
- SUMITOMO_ELEC_ (43)
- SANDVIK (18)
- KYOCERA (5)
- DIJET (4)
- OSG (4)
- ISCAR (1)
- NGK SPARK PLUG (1)
- WIDIA (1)
- NIKKENKOSAKU (0)
- THE_CUT (0)
- ASAHI TOOLS (0)
- TUNGALOY (0)
- NACHI (0)
- DAISHOWASEIKI (0)
- HITACHI TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Inserts (for Milling)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy