(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
SUMITOMO_ELEC_ Cutters / Indexable End Mills（Page2）
| Days to Ship |
|
|---|
-
Used for SEC-Sumi Dual Mill, DGC Model DGC-R
SUMITOMO_ELEC_
Uses an insert which allows the use of 16 on both surfaces and shows excellent economic efficiency.
Standard Price: MYR 1,827.86- Days to Ship: 4 Day(s) or more -
Used for SEC-Sumi Power Mill, PWC Model PWCF-R
SUMITOMO_ELEC_
[Features]
·A multi-flute type Sumi power mill with a high efficiency semi-shoulder for slab milling, side milling, grooving, chamfering, etc., of cast iron.
Maximum cutting depth (Ad) (mm): 15Standard Price: MYR 4,725.40- Days to Ship: 4 Day(s) or more -
Used for SEC-Sumi Power Mill, PWC Model PWC-R
SUMITOMO_ELEC_
[Features]
・ Vertically-mounted inserts with excellent cutting edge strength and optimized chip breaker achieve both outstanding cutting edge strength and cutting performance.
·This product achieves stable machining with little chattering even with a large tool runout.
·It can be used for a variety of work materials.Standard Price: MYR 3,932.02- Days to Ship: 4 Day(s) or more -
Used for SEC-Sumi Power Mill, PWS Model PWSF-R
SUMITOMO_ELEC_
High reliability corner cutter equipped with a vertical insert that combines high cutting edge strength with a sharp cutting edge.
Standard Price: MYR 4,380.20- Days to Ship: 4 Day(s) or more -
Used for SEC-Sumi Power Mill, PWS Model PWS-R
SUMITOMO_ELEC_
High reliability corner cutter equipped with a vertical insert that combines high cutting edge strength with a sharp cutting edge.
Standard Price: MYR 3,650.96- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WEX Model WEX-E
SUMITOMO_ELEC_
Increased precision of cutting edge reinforced low-resistance tip and cutting blade, high-durability body, plentiful tip variations, and air holes in all models.
Standard Price: MYR 1,148.75- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WFX Model WFX-E
SUMITOMO_ELEC_
Screw-fastened cutter enabling 4-corner use. With an ideal cutting edge shape, good wall surface accuracy can be gained.
Standard Price: MYR 1,964.59- Days to Ship: 7 Day(s) or more -
Used for SEC-Wave Mill, WFX Model WFXF-E
SUMITOMO_ELEC_
Screw-fastened cutter enabling 4-corner use. With an ideal cutting edge shape, good wall surface accuracy can be gained.
Standard Price: MYR 2,283.63- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WFX Model WFXF-R
SUMITOMO_ELEC_
Screw-fastened cutter enabling 4-corner use. With an ideal cutting edge shape, good wall surface accuracy can be gained.
Standard Price: MYR 1,850.65- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WGC Model WGC-EW
SUMITOMO_ELEC_
[Features]
·This general-purpose cutter with a handle provides high performance and machining accuracy and can be used in a wide range of applications.
Maximum cutting depth (Ad) (mm): 4, 6Standard Price: MYR 1,144.20- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WGX Model WGX-EW
SUMITOMO_ELEC_
[Features]
·This product provides an excellent finished surface by improving the runout accuracy of the cutting edge and by using a unique wiper edge shape.Standard Price: MYR 1,736.70- Days to Ship: 4 Day(s) or more -
Used for SEC-Sumi Dual, DGC Model DGC-EW
SUMITOMO_ELEC_
Uses an insert which allows the use of 16 on both surfaces and shows excellent economic efficiency.
Standard Price: MYR 1,964.59- Days to Ship: 4 Day(s) or more -
SEC-Metal Slash Mill, MSX Model MSX-E
SUMITOMO_ELEC_
Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.
Standard Price: MYR 1,672.90- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WEX Model WEX-F
SUMITOMO_ELEC_
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Standard Price: MYR 1,745.82- Days to Ship: 7 Day(s) or more -
Used for SEC-Wave Mill, WEX Model WEXF-R
SUMITOMO_ELEC_
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Standard Price: MYR 2,739.41- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WGC Model WGCF-R
SUMITOMO_ELEC_
Achieves world class performance and machining precision as a general purpose cutter that is usable in a wide range of applications.
Standard Price: MYR 3,350.15- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WGC Model WGC-R
SUMITOMO_ELEC_
[Features]
·The high precision body and inserts enable high-quality machining, providing both sharpness and strength at a high level.
·The lineup of products with a reinforced small diameter is suitable for machining small accessories.Standard Price: MYR 2,001.06- Days to Ship: 4 Day(s) or more -
SEC-Wave Mill for WGX Type, WGXF-R(S)
SUMITOMO_ELEC_
Dedicated breaker realizes low resistance. For general cutting of steel and cast iron.
Standard Price: MYR 2,146.90- Days to Ship: 4 Day(s) or more -
SEC-Wave Mill for WGX Type, WGXM-R(S)
SUMITOMO_ELEC_
Dedicated breaker realizes low resistance. For general cutting of steel and cast iron.
Standard Price: MYR 1,896.22- Days to Ship: 4 Day(s) or more -
SEC-Wave Mill for WGX Type, WGX-R(S)
SUMITOMO_ELEC_
Dedicated breaker realizes low resistance. For general cutting of steel and cast iron.
Standard Price: MYR 1,554.39- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Radius Mill, WRCX Model WRCX-E
SUMITOMO_ELEC_
This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.
Standard Price: MYR 1,827.86- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Radius Mill, WRCX Model WRCXF-RS
SUMITOMO_ELEC_
This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.
Standard Price: MYR 2,283.63- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Radius Mill, WRCX Model WRCX-M-Z
SUMITOMO_ELEC_
This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.
Standard Price: MYR 1,836.98 Days to Ship: 4 Day(s) or more -
SEC-Wave Radius Mill for WRCX Type, WRCX-R (S)
SUMITOMO_ELEC_
This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.
Standard Price: MYR 2,032.96- Days to Ship: 4 Day(s) or more -
SEC-Metal Slash Mill MSX Type MSX-R (S)
SUMITOMO_ELEC_
Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.
Standard Price: MYR 2,192.48- Days to Ship: 4 Day(s) or more -
Used for SEC-Wave Mill, WEX Model WEX-M-Z
SUMITOMO_ELEC_
Supports a diverse combination of carbide arbors and steel arbors. Screw-fastened type enables easy switching.
Standard Price: MYR 1,148.75- Days to Ship: 4 Day(s) or more -
SEC-Metal Slash Mill (modular type), MSX Model MSX-M-Z
SUMITOMO_ELEC_
Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.
Standard Price: MYR 1,672.90- Days to Ship: 4 Day(s) or more -
SEC-Wave Mill WAX3000E/EL Type, for chip blade tip nose radius greater than 4.0
SUMITOMO_ELEC_
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
Standard Price: MYR 1,964.59- Days to Ship: 4 Day(s) or more -
SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius less than 3.2
SUMITOMO_ELEC_
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
Standard Price: MYR 3,341.03- Days to Ship: 4 Day(s) or more -
SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius greater than 4.0
SUMITOMO_ELEC_
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
Standard Price: MYR 3,341.03- Days to Ship: 4 Day(s) or more -
SEC-Wave Mill WAX4000E/EL Type, for chip blade tip nose radius less than 3.2
SUMITOMO_ELEC_
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
Standard Price: MYR 2,288.20- Days to Ship: 4 Day(s) or more -
SEC-Wave Mill WAX4000 Type, for chip blade tip nose radius less than 3.2
SUMITOMO_ELEC_
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
Standard Price: MYR 3,190.63- Days to Ship: 4 Day(s) or more -
SEC-Wave Mill WAX4000E/EL Type, for chip blade tip nose radius greater than 4.0
SUMITOMO_ELEC_
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
Standard Price: MYR 2,288.20- Days to Ship: 4 Day(s) or more -
SEC-Wave Mill WAX4000 Type, for chip blade tip nose radius greater than 4.0
SUMITOMO_ELEC_
High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
Standard Price: MYR 3,190.63- Days to Ship: 4 Day(s) or more -
SEC-Wave Multifunctional, Long Type WMM2000EL
SUMITOMO_ELEC_
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
Standard Price: MYR 1,340.19- Days to Ship: 4 Day(s) or more -
SEC-Wave Multifunctional, Standard Type WMM3000E
SUMITOMO_ELEC_
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
Standard Price: MYR 1,394.88- Days to Ship: 4 Day(s) or more -
SEC-Wave Multifunctional, Long Type WMM3000EL
SUMITOMO_ELEC_
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
Standard Price: MYR 1,513.37- Days to Ship: 4 Day(s) or more -
SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM3000ELH
SUMITOMO_ELEC_
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
Standard Price: MYR 1,969.15- Days to Ship: 4 Day(s) or more -
SEC-Metal Slash Mill (Modular Type) MSX08000M Type
SUMITOMO_ELEC_
Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed
Standard Price: MYR 1,627.31- Days to Ship: 4 Day(s) or more -
SEC-Sumi Dual Mill, DFC09000R (S) Type (Standard Type)
SUMITOMO_ELEC_
[Features]
· Unique insert shape provides both an excellent cut and blade tip strength, covering a wide range from high-efficiency machining to finishing.Standard Price: MYR 1,876.04- Days to Ship: 4 Day(s) or more -
SEC-Sumi Dual Mill, DFCM09000R (S) Type (Fine Pitch)
SUMITOMO_ELEC_
[Features]
· Unique insert shape provides both an excellent cut and blade tip strength, covering a wide range from high-efficiency machining to finishing.Standard Price: MYR 2,300.91- Days to Ship: 4 Day(s) or more -
SEC-Sumi Dual Mill, DFCF09000R (S) Type (Extra Fine Pitch)
SUMITOMO_ELEC_
[Features]
· Unique insert shape provides both an excellent cut and blade tip strength, covering a wide range from high-efficiency machining to finishing.Standard Price: MYR 2,513.35- Days to Ship: 4 Day(s) or more -
SEC-Sumi Dual Mill, DFC09000E Type (Standard Type)
SUMITOMO_ELEC_
[Features]
· Unique insert shape provides both an excellent cut and blade tip strength, covering a wide range from high-efficiency machining to finishing.Standard Price: MYR 1,281.21- Days to Ship: 4 Day(s) or more -
SEC-Sumi Dual Mill, DFCM09000E Type (Fine Pitch)
SUMITOMO_ELEC_
[Features]
· Unique insert shape provides both an excellent cut and blade tip strength, covering a wide range from high-efficiency machining to finishing.Standard Price: MYR 1,663.60- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Machining Application |
| blade diameter D(φ) |
| work material |
| Finish category |
| Overall length (L)(mm) |
| Number of flutes(sheet) |
| Mounting Method |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Maximum Cutting Depth (Ad)(mm) |
| Compatible Tip Material |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ |
| Product Series | SEC-Wave Mill WAX3000E/EL Type, for chip blade tip nose radius greater than 4.0 | SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius less than 3.2 | SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius greater than 4.0 | SEC-Wave Mill WAX4000E/EL Type, for chip blade tip nose radius less than 3.2 | SEC-Wave Mill WAX4000 Type, for chip blade tip nose radius less than 3.2 | SEC-Wave Mill WAX4000E/EL Type, for chip blade tip nose radius greater than 4.0 | SEC-Wave Mill WAX4000 Type, for chip blade tip nose radius greater than 4.0 | SEC-Wave Multifunctional, Long Type / Air Hole Specification WMM3000ELH | ||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Machining Application | Plane / Groove / Chamfer | Plane / Side / Groove / Chamfer | Plane / Side / Groove / Chamfer | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Groove / Chamfer | Plane / Groove | Plane / Groove | Plane / Groove | Plane / Groove | Plane / Groove | Plane / Side / Groove | Plane / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Groove | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side |
| blade diameter D(φ) | 40(42.9) ～ 250 (252.9) | 80 ～ 200 | 80 ～ 200 | 80 ～ 250 | 80 ～ 250 | 25 ～ 63 | 40 ～ 80 | 50 ～ 80 | 50 ～ 200 | 20 ～ 63 | 32 ～ 63 | 40 ～ 60 | 32 ～ 63 | 40 ～ 63 | 80 ～ 125 | 80 ～ 200 | 80 ～ 200 | 50 ～ 250 | 50 ～ 250 | 40 ～ 250 | 40 ～ 50 | 50 ～ 100 | 40 | 40 ～ 160 | 50 ～ 100 | 25 ～ 40 | 32 ～ 40 | 20 ～ 40 | 50 ～ 125 | 50 ～ 125 | 25 ～ 40 | 50 ～ 125 | 25 ～ 40 | 50 ～ 125 | 20 ～ 30 | 32 ～ 40 | 32 ～ 40 | 32 ～ 40 | 25 ～ 35 | - | - | - | 32 ～ 40 | 32 ～ 40 |
| work material | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | Cast Iron | Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron | - | - | - | - | - |
| Finish category | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | - | - | - | - | - |
| Overall length (L)(mm) | - | - | - | - | - | 120 ～ 220 | 120 | 120 | - | 100 ～ 125 | 125 | 125 | 150 ～ 250 | - | - | - | - | - | - | - | 170 ～ 250 | - | - | - | - | 56 ～ 63 | 63 | 130 ～ 220 | - | - | 140 ～ 220 | - | 140 ～ 220 | - | 185 ～ 230 | 150 ～ 160 | 230 ～ 240 | 230 ～ 240 | 56 ～ 63 | - | - | - | - | - |
| Number of flutes(sheet) | 3 ～ 10 | 9 ～ 24 | 7 ～ 16 | 6 ～ 14 | 4 ～ 12 | 2 ～ 6 | 3 ～ 4 | 4 ～ 6 | 4 ～ 16 | 2 ～ 6 | 3 ～ 5 | 3 ～ 4 | 2 ～ 4 | 4 ～ 6 | 7 ～ 9 | 8 ～ 20 | 4 ～ 8 | 5 ～ 24 | 4 ～ 14 | 3 ～ 10 | 2 ～ 3 | 4 ～ 6 | 4 | 3 ～ 6 | 3 ～ 6 | 2 ～ 4 | 2 ～ 3 | 1 ～ 3 | 4 ～ 7 | 4 ～ 7 | 1 ～ 2 | 2 ～ 6 | 1 ～ 2 | 2 ～ 6 | 3 ～ 5 | 4 | 4 | 4 | 2 ～ 3 | - | 5 ～ 12 | 6 ～ 16 | - | - |
| Mounting Method | Arbor | Arbor | Arbor | Arbor | Arbor | With handle | With handle | With handle | Arbor | With handle | With handle | With handle | With handle | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | Arbor | With handle | Arbor | Arbor | Arbor | Arbor | Centering Plug | With handle | With handle | Arbor | Arbor | With handle | Arbor | With handle | Arbor | With handle | With handle | With handle | With handle | Centering Plug | Arbor | Arbor | Arbor | With handle | With handle |
| Shank diameter (d)(mm) | - | - | - | - | - | 20 ～ 42 | 32 | 32 | - | 20 ～ 32 | 32 | 32 | 32 ～ 42 | - | - | - | - | - | - | - | 32 | - | - | - | - | 12.5 ～ 17 | 17 | 20 ～ 32 | - | - | 25 ～ 32 | - | 25 ～ 32 | - | 20 ～ 25 | 32 | 32 | 32 | - | - | - | - | - | - |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | 25 ～ 80 | 30 | 30 | - | 40 | 40 | 40 | 50 ～ 120 | - | - | - | - | - | - | - | 50 | - | - | - | - | 35 ～ 40 | 40 | 60 ～ 70 | - | - | 60 ～ 70 | - | 60 ～ 70 | - | 35 ～ 75 | 50 ～ 55 | 50 ～ 90 | 50 ～ 90 | 35 ～ 40 | - | - | - | 80 | 80 |
| Maximum Cutting Depth (Ad)(mm) | 6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip) | 15 | 15 | 16 | 16 | 14 | 10 | 10 | 10 | 4 ～ 6 | 6 | 3 ～ 6 | 1 ～ 2.5 | 14 | 14 | 6 | 4 ～ 6 | 6 | 6 | 6 | 8 | 6 ～ 8 | 6 | 6 ～ 10 | 1.5 ～ 2.4 | 14 | 1 ～ 2 | 16 ～ 18 | 16 ～ 18 | 16 ～ 18 | 22 ～ 24 | 22 ～ 24 | 22 ～ 24 | 22 ～ 24 | 17 ～ 35 | 39 | 39 | 39 | 1 ～ 2 | - | - | - | - | - |
| Compatible Tip Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Machining Application
-
blade diameter D(φ)
- 6
- 8
- 9
- 10
- 10 mm
- 11
- 12
- 12 mm
- 13.2
- 13.4
- 14
- 15
- 15 mm
- 15.4
- 16
- 16 mm
- Cutter Diameter φ16
- 16.2
- 17
- 17.5
- 18
- Cutter Diameter φ18
- 18.2
- 18.4
- 18.5
- 18.9
- 19
- 20
- 20 mm
- Cutter Diameter φ20
- 20.2
- 21
- 22
- Cutter Diameter φ22
- 23
- 23.2
- 23.4
- 23.8
- 24
- 24 mm
- 25
- 25 mm
- 25 mm
- Cutter Diameter φ25
- 26
- 28
- 28.2
- 30
- 30 mm
- 30/32
- 30.7
- 32
- 32 mm
- Cutter Diameter φ32
- 33
- 33.4
- 34
- 35
- 35.9
- 36
- 36.0 mm
- 36 mm
- 37
- 38
- 38.2
- 39
- 40
- 40 mm
- 40mm
- Cutter Diameter φ40
- 40(42.9)
- 42
- 42.0 mm
- 42mm
- 43
- 44
- 44 mm
- 44mm
- 44.5 mm
- 45
- 46.4
- 47
- 48.7
- 50
- 50 mm
- 50mm
- 50 mm
- 50.0 mm
- Cutter Diameter φ50
- 50 (52.9)
- 51
- 51.2
- 52
- 52.0 mm
- 52mm
- 52 mm
- 52.5 mm
- 54
- 54 mm
- 54mm
- 54.08mm
- 55
- 60
- 61.7
- 62.5 mm
- 62.5mm
- 63
- 63 mm
- 63mm
- 63 mm
- 63.0 mm
- Cutter Diameter φ63
- 63 (65.9)
- 63.4
- 63.5
- 64
- 64.08mm
- 65
- 66
- 66 mm
- 66.0 mm
- 66mm
- 66 mm
- 68
- 69.7mm
- 70
- 75
- 75.5 mm
- 75.5mm
- 76.2
- 77.08mm
- 77.08 mm
- 78.7
- 80
- 80 mm
- 80mm
- 80 mm
- 80.0 mm
- Cutter Diameter φ80
- 80 (82.9)
- 83.4
- 84
- 84 mm
- 84.0 mm
- 84mm
- 86.7mm
- 88
- 89.4
- 90
- 92.5mm
- 94.08mm
- 94.08 mm
- 98.7
- 98.8mm
- 100
- 100 mm
- 100mm
- 100 mm
- 100.0 mm
- Cutter Diameter φ100
- 100 (102.9)
- 101.3mm
- 101.6
- 105
- 106.7mm
- 109
- 110
- 112.5mm
- 114.08mm
- 114.08 mm
- 118.8mm
- 123.7
- 125
- 125mm
- 125 mm
- Cutter Diameter φ125
- 125 (127.9)
- 127
- 130
- 131.4mm
- 131.7mm
- 137.5mm
- 138.8mm
- 139.08mm
- 139.08 mm
- 140
- 150
- 152.4
- 157
- 160
- 160 mm
- 160mm
- 160 mm
- 160 (162.9)
- 166.7mm
- 172.5mm
- 174.08 mm
- 174.08mm
- 174.08 mm
- 200
- 200mm
- 200 (202.9)
- 212.5mm
- 250
- 250mm
- 250 (252.9)
- 268.8mm
- 315
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
26～27
- 26
- 27
-
32～38
- 32
- 33
- 35
- 38
-
40～49
- 40
- 40$40.7
- 42
- 43
- 45
- 49
-
50～57
- 50
- 50$50.7
- 55
- 56
- 57
-
60～63$63.7
- 60
- 63
- 63$63.7
-
70～79
- 70
- 73
- 74
- 75
- 77.7
- 78
- 79
-
80～88
- 80
- 83
- 84
- 84.7
- 85
- 88
-
90～98.7
- 90
- 92
- 95
- 96
- 98
- 98.7
-
100～109
- 100
- 101
- 102
- 103
- 104
- 105
- 108
- 109
-
110～117
- 110
- 112
- 115
- 117
-
120～129
- 120
- 121
- 122
- 123
- 123.5
- 124
- 125
- 127
- 128
- 129
-
130～138
- 130
- 131
- 132
- 133
- 134
- 134.6
- 135
- 136
- 137
- 138
-
140～145
- 140
- 141
- 143
- 144
- 145
-
150～158
- 150
- 155
- 158
-
160～166
- 160
- 165
- 166
-
170～176
- 170
- 171
- 172
- 173
- 176
-
180～187
- 180
- 184.6
- 185
- 186
- 187
-
190～191
- 190
- 191
-
200
-
210～217.5
- 210
- 215
- 217.5
-
220
-
230
-
240
-
250～256
- 250
- 256
-
260～266.8
- 260
- 266.8
-
270
-
280
-
290～296.8
- 290
- 296.8
-
300～306
- 300
- 306
-
331.8
-
350
-
-
Number of flutes(sheet)
-
Mounting Method
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Maximum Cutting Depth (Ad)(mm)
-
Compatible Tip Material
Narrow search by specifying Manufacturer
-
- MISUMI (3)
- SUMITOMO_ELEC_ (89)
- SANDVIK (54)
- KYOCERA (46)
- OSG (27)
- DIJET (20)
- FUJIGEN (11)
- DAISHOWASEIKI (8)
- NGK SPARK PLUG (6)
- TUNGALOY (4)
- ASAHI TOOLS (3)
- HITACHI TOOL (2)
- ISCAR (2)
- THE_CUT (2)
- ESCO (1)
CAD
-
- 2D
- 3D
Related Categories to Cutters / Indexable End Mills
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy