(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
SANKO MFG Square HSS End Mills（Tool Material Type：Cobalt HSS）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
S-SUSα S Coating for Stainless Steel Groove Processing
SANKO MFG
Flat nick type roughing endmill with TiCN coating. Ideal for grooving of stainless steel.
Standard Price: MYR 221.70- Days to Ship: 5 Day(s) or more -
SANKO MFG
A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
Standard Price: MYR 114.00- Days to Ship: 4 Day(s) or more -
KHB2TS Hybrid Short 2-Flute Blade
SANKO MFG
A 2-flute end mill for finish machining. Abrasion resistance is excellent and high efficiency machining is possible.
[Features]
· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).
· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.
· Furthermore, machining speed is equivalent to carbide, providing "high efficiency and safety".
· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.Standard Price: MYR 165.15- Days to Ship: 7 Day(s) or more -
P-VS2T, P Coating 2-Flute Short Flute
SANKO MFG
[Features]
· P coating provides excellent surface flatness and abrasion resistance.
· A 2-flute end mill for finish machining.Standard Price: MYR 114.00- Days to Ship: 7 Day(s) or more -
SANKO MFG
A 2-flutes end mill for finishing.
Materials: HS-Co (cobalt high-speed steel)
Outer diameter tolerance: -0.03 to 0
Helix angle: 30°
Blade Tip Shape: Sharp CornerStandard Price: MYR 81.93- Days to Ship: 3 Day(s) or more -
SANKO MFG
A 2-flute end mill for finish machining. Enables a wide range of machining applications, due to the regular flute length.
Standard Price: MYR 81.93- Days to Ship: 5 Day(s) or more -
SANKO MFG
A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
Standard Price: MYR 103.88- Days to Ship: 5 Day(s) or more -
KHB4TS Hybrid Short 4-Flute Blade
SANKO MFG
[Features]
· A 4-flute end mill for finish machining.
· Abrasion resistance is excellent and high efficiency machining is possible.
· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).
· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.
· Furthermore, machining speed is equivalent to carbide, providing "high functionality and safety".
· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.Standard Price: MYR 181.09- Days to Ship: 7 Day(s) or more -
P-VS3T P Coated 3-Flute Short Blade
SANKO MFG
[Features]
· A 3-flute end mill for finish machining.
· P coating provides excellent surface flatness and abrasion resistanceStandard Price: MYR 124.55- Days to Ship: 7 Day(s) or more -
P-VS4T, P Coating 4-Flute Short Flute
SANKO MFG
[Features]
· A 4-flute end mill for finish machining.
· P coating provides excellent surface flatness and abrasion resistance.Standard Price: MYR 124.55- Days to Ship: 5 Day(s) or more -
SANKO MFG
[Features]
· A 4-flute end mill for finish machining.
· The outer diameter tolerance is negative (φ2-50).Standard Price: MYR 89.53- Days to Ship: 5 Day(s) or more -
SANKO MFG
A 4-flute end mill for finish machining. The outer diameter tolerance is positive.
Standard Price: MYR 89.53- Days to Ship: 5 Day(s) or more -
HV4TLS 4-Flute Blade High Helix Long Shank
SANKO MFG
A high helical type end mill. A long shank type which allows for machining in deep sections.
Standard Price: MYR 459.13- Days to Ship: 7 Day(s) or more -
P-XαS P Coating Xα Nick Short Flute
SANKO MFG
A semi-fine pitch type roughing end mill. Excellent chip discharge.
Standard Price: MYR 228.28- Days to Ship: 5 Day(s) or more -
P-XαM P Coating Xα Nick Regular Flute
SANKO MFG
[Features]
· A semi-fine pitch type P-XαS roughing end mill.
· Excellent chip discharge.
· Enables a wide range of machining applications, due to the regular flute.Standard Price: MYR 288.20- Days to Ship: 7 Day(s) or more -
S-FPαS, S Coating Fine Pitch Short Flute
SANKO MFG
Fine pitch type roughing endmill with TiCN coating. Machining allowance can be reduced when performing finish machining.
Standard Price: MYR 256.64- Days to Ship: 5 Day(s) or more -
S-FPαM S Coating Fine Pitch Regular Flute (Roughing End Mill)
SANKO MFG
[Features]
· Fine pitch type roughing endmill with S coating.
· Machining allowance can be reduced when performing finish machining.
· Enables a wide range of machining applications, due to the regular flute length.Standard Price: MYR 320.87- Days to Ship: 6 Day(s) or more -
S-FPαL S-Coating Fine Pitch Long Flute
SANKO MFG
[Features]
· Fine pitch type roughing endmill with S coating.
· Machining allowance can be reduced when performing finish machining.
· Enables a wide range of machining and deep engraving, due to the long flute length.Standard Price: MYR 526.65- Days to Ship: 7 Day(s) or more -
S-αS S-Coating α Nick Short Flute
SANKO MFG
[Features]
· Standard pitch type roughing endmill with TiCN coating.Standard Price: MYR 256.64- Days to Ship: 7 Day(s) or more -
S-αM S-Coated Alpha Nick Regular Blade
SANKO MFG
Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining applications, due to the regular flute length.
Standard Price: MYR 393.46- Days to Ship: 7 Day(s) or more -
S-αL S-Coated Alpha Nick Long Blade
SANKO MFG
Standard pitch type roughing endmill with TiCN coating. Enables a wide range of machining and deep engraving, due to the long flute length.
Standard Price: MYR 868.14- Days to Ship: 7 Day(s) or more -
S-αH S Coating α Nick Hard Type
SANKO MFG
Hard pitch type roughing endmill with TiCN coating. Ideal for heavy duty groove cutting.
Standard Price: MYR 245.42- Days to Ship: 7 Day(s) or more -
S-αHM S-Coated Alpha Nick Hard Type Regular Blade
SANKO MFG
[Features]
· Hard pitch type roughing endmill with S coating.
· Ideal for heavy duty groove cutting.
· Enables a wide range of machining applications, due to the regular flute length.Standard Price: MYR 273.81- Days to Ship: 7 Day(s) or more -
SANKO MFG
Normal pitch type roughing end mill.
Blade type
Materials: Hs-Co (cobalt high-speed steel)
Helix angle: 30°
nick shape: standard pitch nickStandard Price: MYR 168.17- Days to Ship: 5 Day(s) or more -
SANKO MFG
A standard pitch type roughing end mill. Enables a wide range of machining applications, due to the regular flute length.
Standard Price: MYR 262.80- Days to Ship: 7 Day(s) or more -
SANKO MFG
A standard pitch type roughing end mill. Enables a wide range of machining and deep engraving, due to the long flute length.
Standard Price: MYR 522.50- Days to Ship: 5 Day(s) or more -
SANKO MFG
A hard pitch type roughing end mill. Ideal for heavy duty groove cutting.
Days to Ship: 5 Day(s) or more -
αHM, α Nick Hard Type Regular Blade
SANKO MFG
A hard pitch type roughing end mill. Ideal for heavy duty groove cutting. Enables a wide range of machining applications, due to the regular flute length.
Standard Price: MYR 176.60- Days to Ship: 7 Day(s) or more -
αHLS α Nick Roughing Hard Type Long-Shank Type
SANKO MFG
A hard pitch type roughing end mill. Ideal for heavy duty groove cutting. The long shank allows for machining in deep sections.
Standard Price: MYR 493.79- Days to Ship: 7 Day(s) or more -
SUSα for Stainless Steel Groove Processing
SANKO MFG
[Features]
· A flat nick type roughing end mill.
· Ideal for grooving of stainless steel.Standard Price: MYR 165.20- Days to Ship: 5 Day(s) or more -
αFS α Flat Nick Roughing Short Blade
SANKO MFG
A flat nick type roughing end mill. Semi-finishing is possible.
Standard Price: MYR 294.13- Days to Ship: 7 Day(s) or more -
AL1T 1-Flute for Aluminum Frame
SANKO MFG
An end mill dedicated to aluminum sash processing.
Tool Material: Cobalt High-Speed Steel, Work Material: Aluminum
Coating: Uncoated, Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pc.): 1
Helix angle: Standard helix (30 to 44°)Standard Price: MYR 158.84- Days to Ship: 5 Day(s) or more -
SANKO MFG
Ideal for roughing aluminum material. Capable of machining grooves up to 1.5D.
[Features]
· Endmill dedicated to machining aluminum sashes.Standard Price: MYR 172.89- Days to Ship: 7 Day(s) or more -
SANKO MFG
Endmill dedicated for key groove machining. The outer diameter tolerance is positive.
Standard Price: MYR 93.57- Days to Ship: 6 Day(s) or more -
SANKO MFG
A straight blade type 2-flutes end mill.
Materials: HS-Co (cobalt high-speed steel)
Outer diameter tolerance: -0.03 to 0
Straight BladeStandard Price: MYR 86.48- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG |
| Product Series | S-FPαM S Coating Fine Pitch Regular Flute (Roughing End Mill) | ||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 3 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more |
| Blade diameter (D)(φ) | 3 ～ 30 | 3 ～ 60 | 5 ～ 30 | 3 ～ 30 | 1 ～ 60 | 3 ～ 14 | 3 ～ 50 | 5 ～ 30 | 3 ～ 30 | 3 ～ 30 | 3 ～ 60 | 3 ～ 40 | 20 ～ 50 | 5 ～ 50 | 5 ～ 40 | 5 ～ 50 | 5 ～ 50 | 10 ～ 50 | 5 ～ 50 | 10 ～ 50 | 14 ～ 50 | 5 ～ 50 | 6 ～ 50 | 5 ～ 60 | 10 ～ 50 | 14 ～ 60 | 5 ～ 50 | 6 ～ 50 | 20 ～ 50 | 3 ～ 30 | 10 ～ 50 | 6 ～ 12 | 6 ～ 40 | 3 ～ 25 | 2 ～ 49 |
| Blade length (ℓ)(mm) | 5 ～ 55 | 20 ～ 300 | 10 ～ 55 | 8 ～ 55 | 2 ～ 85 | 10 ～ 35 | 20 ～ 250 | 15 ～ 55 | 10 ～ 55 | 10 ～ 55 | 10 ～ 85 | 10 ～ 65 | 55 ～ 90 | 10 ～ 80 | 15 ～ 100 | 10 ～ 80 | 15 ～ 120 | 45 ～ 150 | 10 ～ 80 | 35 ～ 120 | 65 ～ 200 | 8 ～ 75 | 15 ～ 110 | 10 ～ 95 | 35 ～ 120 | 65 ～ 300 | 8 ～ 75 | 15 ～ 110 | 45 ～ 75 | 5 ～ 55 | 25 ～ 80 | 18 ～ 45 | 15 ～ 65 | 5 ～ 25 | 10 ～ 60 |
| Shank diameter (d)(mm) | 6 ～ 25 | 6 ～ 42 | 8 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 12 | 6 ～ 42 | 8 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 32 | 16 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 42 | 10 ～ 42 | 16 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 16 ～ 42 | 6 ～ 42 | 6 ～ 42 | 16 ～ 42 | 6 ～ 25 | 10 ～ 42 | 8 ～ 12 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 |
| Number of flutes(sheet) | 3 ～ 4 | 4 | 2 | 2 | 2 | 2 | 2 | 4 | 3 | 4 | 4 | 4 | 4 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 3 ～ 4 | 4 ～ 6 | 1 | 3 ～ 4 | 2 | 2 |
| Overall Length (L)(mm) | 55 ～ 165 | 60 ～ 395 | 60 ～ 135 | 50 ～ 135 | 50 ～ 185 | 50 ～ 90 | 60 ～ 345 | 60 ～ 135 | 50 ～ 135 | 50 ～ 135 | 50 ～ 185 | 50 ～ 150 | 200 ～ 320 | 70 ～ 200 | 80 ～ 220 | 70 ～ 200 | 80 ～ 240 | 100 ～ 270 | 70 ～ 200 | 100 ～ 240 | 145 ～ 320 | 55 ～ 165 | 60 ～ 200 | 70 ～ 210 | 100 ～ 240 | 145 ～ 420 | 55 ～ 165 | 60 ～ 200 | 200 ～ 320 | 55 ～ 165 | 90 ～ 200 | 80 ～ 100 | 70 ～ 185 | 50 ～ 95 | 60 ～ 170 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | Aluminum[◎] | Aluminum[◎] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] |
| Machining Application | Groove | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Groove | Side / Groove | Groove | Plane / Side / Groove / Inclined Cuts |
| Coating | TiCN | Non-Coated | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Blade shape type | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Roughing | Square | Square |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | No torsion |
| Base Blade Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 28 ～ 66 | - | - | - |
| shank | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
-
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Machining Application
-
Coating
-
Blade shape type
- Square
- Roughing
- For Keyway
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
-
Underneck length (ℓ1)(mm)
-
shank
Narrow search by specifying Manufacturer
-
- MISUMI (31)
- OSG (47)
- SANKO MFG (35)
- NACHI (19)
- EIKOSHA (3)
- DAIICHITOOL (0)
- TAIYO-TOOL (0)
- ASAHI TOOLS (0)
- FUKUDA (0)
- ESCO (0)
CAD
-
- 2D
- 3D
Related Categories to Square HSS End Mills
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy