(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
SANDVIK Turning Inserts（Shape：Other）
| Days to Ship |
|
|---|
-
SANDVIK
[Features]
High clamp rigidity
For turning
For low-feed machining
Seat size: K
Width: 6.0 mmStandard Price: MYR 181.76- Days to Ship: 10 Day(s) -
SANDVIK
[Features]
CoroCut 2 inserts
Solid carbide-coated tip
For parting and grooving
The rail lock provides high clamp rigidity
2-cutting-edge specification
For grooving
For low-feed machining
Seat size: F
Width: 3.0 mm
Full RStandard Price: MYR 179.71- Days to Ship: 10 Day(s) -
Standard Price: MYR 159.05- Days to Ship: 10 Day(s) -
SANDVIK
[Features]
T-Max Q-Cut insert
Solid carbide-coated insert
For parting and grooving
Single-edge specification
For grooving
For low-feed machining
Width: 5.0 mmStandard Price: MYR 86.85- Days to Ship: 10 Day(s) -
CoroCut 1/2 For Grooving 123-GF
SANDVIK
[Features]
High clamp rigidity
For grooving
For low-feed machining
Seat size: F
Width: 2.39 mmStandard Price: MYR 186.66- Days to Ship: 10 Day(s) -
CoroCut 1/2 For Profiling & Turning
SANDVIK
[Features]
CoroCut 2 inserts
Solid carbide-coated tip
For parting and grooving
The rail lock provides high clamp rigidity
2-cutting-edge specification
For turning
For medium-feed machining
Seat size: G
Width: 3.0 mmStandard Price: MYR 181.76- Days to Ship: 10 Day(s) -
Standard Price: MYR 445.11- Days to Ship: 9 Day(s) or more -
SANDVIK
[Features]
CoroCut 2 inserts
Solid carbide-coated tip
For parting and grooving
The rail lock provides high clamp rigidity
2-cutting-edge specification
For parting
For high-feed machining
Seat size: G
Width: 3.0 mmStandard Price: MYR 156.05- Days to Ship: 10 Day(s) -
CoroCut XS Insert For Grooving
SANDVIK
[Features]
Insert for CoroCut XS
Carbide-coated insert
For machining small components
For grooving
Width: 1.5 mmStandard Price: MYR 220.20- Days to Ship: 10 Day(s) -
Standard Price: MYR 960.18 Days to Ship: 10 Day(s) -
Standard Price: MYR 1,128.70 Days to Ship: 10 Day(s) -
Standard Price: MYR 114.86 Days to Ship: 10 Day(s) -
Standard Price: MYR 806.91- Days to Ship: 10 Day(s) -
Standard Price: MYR 96.51 Days to Ship: 10 Day(s) -
Standard Price: MYR 165.31 Days to Ship: 10 Day(s) -
Standard Price: MYR 128.55- Days to Ship: 10 Day(s) -
Standard Price: MYR 147.43- Days to Ship: 10 Day(s) -
Standard Price: MYR 89.91- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 128.63- Days to Ship: 10 Day(s) -
Standard Price: MYR 440.68 Days to Ship: 10 Day(s) -
SANDVIK
[Features]
T-Max Q-Cut insert
Solid carbide-coated insert
For parting and -grooving
Single-cutting-edge specification
For profiling
For medium-feed machining
Full R
Width: 3.0 mmStandard Price: MYR 100.13- Days to Ship: 10 Day(s) -
T-Max Q-Cut For Turning And Recessing
SANDVIK
[Features]
T-Max Q-Cut insert
Solid carbide-coated insert
For parting and grooving
Single-cutting-edge specification
For turning
For low-feed machining
Width: 4.0 mmStandard Price: MYR 101.13- Days to Ship: 10 Day(s) -
SANDVIK
[Features]
T-Max Q-Cut insert
Solid carbide-coated insert
For parting and grooving
Single-cutting-edge specification
For machining reliefs, recesses etc.
For medium-feed machining
Width: 4.0 mmStandard Price: MYR 139.69- Days to Ship: 10 Day(s) -
Standard Price: MYR 92.79- Days to Ship: 10 Day(s) -
T-Max Q-Cut (151.3 Type) For Face Grooving, Inner Diameter Grooving, Turning
SANDVIK
[Features]
T-Max Q-Cut insert
Solid carbide-coated insert
For parting and grooving
Single-cutting-edge specification
For grooving
For low-feed machining
Width: 4.0 mmStandard Price: MYR 99.67- Days to Ship: 10 Day(s) -
CoroCut 1/2 For Parting (Clearance Angle: 5°)
SANDVIK
[Features]
CoroCut 2 inserts
2-cutting-edge specification
Solid carbide-coated insert
High clamp rigidity
For parting
For low-feed machining
Seat size: E
Width: 2.0 mmStandard Price: MYR 227.38- Days to Ship: 10 Day(s) -
CoroCut 1/2 For Grooving (2-Flute)
SANDVIK
[Features]
CoroCut 2 inserts
2-cutting-edge specification
Solid carbide-coated insert
High clamp rigidity
For grooving
For medium-feed machining
Seat size: J
Width: 5.0 mmStandard Price: MYR 173.76- Days to Ship: 10 Day(s) -
CoroCut 1/2 For Grooving High-Hardness Materials
SANDVIK
[Features]
CBN insert
CoroCut insert
Precision class
Single cutting edge specification
For machining high-hardness materials
For finishingStandard Price: MYR 899.83- Days to Ship: 10 Day(s) -
SANDVIK
[Features]
CoroCut 1 inserts
1-cutting-edge specification
Solid carbide-coated insert
High clamp rigidity
For grooving
For medium-feed machining
Seat size: G
Width: 4.0 mm
Full RStandard Price: MYR 121.60- Days to Ship: 10 Day(s) -
CoroCut 1/2 For Aluminum Alloy Profiling
SANDVIK
[Features]
CoroCut 2 inserts
2-cutting-edge specification
Carbide insert
High clamp rigidity
For aluminum alloy profiling
For medium-feed machining
Seat size: J
Width: 6.0 mm
Full RStandard Price: MYR 305.49- Days to Ship: 10 Day(s) -
Standard Price: MYR 640.74- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 308.12 Days to Ship: 10 Day(s) -
Insert For CoroCut MB, For Grooving, MB-..G
SANDVIK
[Features]
CoroCut MB, insert for grooving
Carbide-coated insert
For grooving
Width: 3.0 mmStandard Price: MYR 140.88- Days to Ship: 10 Day(s) -
Standard Price: MYR 336.05- Days to Ship: 9 Day(s) or more -
SANDVIK
[Features]
CoroCut 1 insert
1-cutting-edge specification
Solid carbide-coated insert
High clamp rigidity
For grooving
For medium-feed machining
Seat size: M
Width: 9.0 mmStandard Price: MYR 165.03- Days to Ship: 10 Day(s) -
Standard Price: MYR 1,362.33 Days to Ship: 10 Day(s) -
Standard Price: MYR 299.39- Days to Ship: 10 Day(s) -
Standard Price: MYR 250.93- Days to Ship: 10 Day(s) -
CoroCut MB Insert For Face Grooving
SANDVIK
[Features]
CoroCut MB, insert for grooving
Carbide-coated insert
For face grooving
Width: 1.5 mmStandard Price: MYR 285.48- Days to Ship: 10 Day(s) -
Standard Price: MYR 301.09 Days to Ship: 10 Day(s) -
Standard Price: MYR 146.11 Days to Ship: 10 Day(s) -
Standard Price: MYR 195.40 Days to Ship: 10 Day(s) -
Insert For CoroCut MB, For Turning/Profiling
SANDVIK
[Features]
CoroCut MB, insert for grooving
Carbide-coated insert
For turningStandard Price: MYR 141.31- Days to Ship: 10 Day(s) -
Insert For CoroCut MB, For Profiling / Back Boring
SANDVIK
[Features]
CoroCut MB, insert for grooving
Carbide-coated insert
For profiling/turningStandard Price: MYR 144.00- Days to Ship: 10 Day(s) -
CoroCut XS Insert For Threading Without Finishing Blade V-Shaped 60°
SANDVIK
[Features]
Insert for CoroCut XS
Carbide-coated insert
For machining small components
For threadingStandard Price: MYR 139.53- Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | T-Max Ceramic Insert For Grooving And Profiling Heat-Resistant Alloy And High Hardness Material | T-Max Q-Cut (151.3 Type) For Face Grooving, Inner Diameter Grooving, Turning | CoroTurn XS Insert Bar For Face Grooving CXS..F..AR/L(1)/CXS..F..AR/L(2) | CoroCut XS Insert For Threading Without Finishing Blade V-Shaped 60° | |||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 9 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 5 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 9 Day(s) or more | 10 Day(s) | 10 Day(s) | 9 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 9 Day(s) or more |
| Shape | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other |
| work material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | - | High Hardness Material | Stainless Steel | Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Non-ferrous metal | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | - | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal / Heat-resistant alloy, titanium alloy |
| Application | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Outer Diameter/Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Outer Diameter/Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Outer Diameter/Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Threading | Grooving / Parting | Grooving / Parting | Threading |
| Available corners | 2 | 2 | 1 | 1 | 2 | 2 | 1 | 2 | 2 | 1 | 1 | 2 | 1 | 1 | 2 | 1 | 1 | 1 | 1 | 4 | 1 | 1 | 1 | 1 | 1 | 2 | 2 | 1 | 1 | 2 | 1 | 2 | 1 | 1 | 1 / 2 | 1 | 1 | 1 | 1 | 1 | 1 | 3 | 1 | 1 | 2 |
| Breaker Use | - | - | - | - | - | - | - | - | - | - | - | Finish | - | - | - | - | - | - | - | Medium grinding | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Finish | - | - | Finish |
| Rake angle | - | - | - | - | - | - | - | - | - | - | - | Negative | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nose R | 0.4 ～ Other | 1.2 ～ Other | 0.2 | 0.2 ～ Other | 0.2 ～ Other | 0.4 ～ 1.2 | Other | 0.2 ～ 0.4 | Other | Other | Other | Other | Other | 0.2 | Other | 0.2 | Other | 0.2 ～ Other | 0.4 | Other | Other | 0.4 ～ 0.8 | Other | 0.2 ～ Other | 0.4 ～ Other | Other | 0.2 ～ Other | 0.2 | Other | Other | 0.2 | Other | Other | Other | 0.8 ～ 1.2 | Other | Other | 0.2 | 0.2 ～ Other | Other | 0.2 | - | 0.2 | 0.2 | Other |
| Selfishly | No-hand | No-hand | Right-hand / Left-hand | No-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand / No-hand | Right-hand / Left-hand | Left-hand | No-hand | Left-hand | No-hand | No-hand | Left-hand | No-hand | Left-hand | Right-hand / Left-hand / No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand / No-hand | No-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | No-hand | No-hand | Left-hand / No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand |
| Groove Width (For Grooving / Plunging) | 3.00 mm ～ 8.00 mm | 2.00 mm ～ 8.00 mm | - | 1.85 mm ～ 10.00 mm | 1.50 mm ～ 8.00 mm | 3.00 mm ～ 8.00 mm | 3.17 mm ～ 6.35 mm | 1.5 mm ～ 6.0 mm | 0.50 mm ～ 2.50 mm | 2.00 mm | 4.00mm | - | 3.00mm ～ 8.00mm | 2.0mm | 3.0mm | 2.7mm ～ 3.8mm | 1.00mm ～ 2.00mm | 2.00mm ～ 5.00mm | 4.00mm ～ 6.00mm | - | 3.00 mm ～ 10.00 mm | 3.00 mm ～ 6.00 mm | 2.00 mm ～ 8.00 mm | 1.85 mm ～ 8.00 mm | 3.00 mm ～ 6.00 mm | 1.5 mm ～ 3.0 mm | 2.00 mm ～ 10.00 mm | 3.00 mm ～ 6.35 mm | 2.00 mm ～ 8.00 mm | 6.00 mm ～ 8.00 mm | 2.00 mm ～ 5.00 mm | 2.5 | 0.73 mm ～ 3.18 mm | 6.35 mm ～ 12.7 mm | 9.00 mm ～ 15.00 mm | 2.00 mm | 2.00 mm ～ 3.00 mm | 1.50 mm ～ 4.00 mm | 1.00 mm ～ 4.00 mm | 3.00 mm ～ 4.00 mm | - | - | - | - | 3.18 mm |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Min. 0.2 mm / Max. 1 mm ～ Min. 0.2 mm / Max. 2 mm |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Internal Diameter | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Trapezoid 29° | - | - | General Purpose 60° |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8TPI ～ 16TPI | - | - | Min. 80 / Max. 12 (inches) ～ Min. 80 / Max. 24 (inches) |
Loading...
Configure
Specification/Dimensions
-
Shape
- C (80° Diamond-Shape)
- D (55° Diamond-Shape)
- R (Circular)
- S (Rectangular)
- T (Triangle)
- V (35° Diamond-Shaped)
- W (Hexagonal Type)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Medium to coarse grinding
-
Rake angle
- Negative
- Pozidriv
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- SUMITOMO_ELEC_ (51)
- SANDVIK (47)
- KYOCERA (26)
- ISCAR (20)
- NGK SPARK PLUG (18)
- OSG (2)
- DAISHOWASEIKI (1)
- DIJET (0)
- ECHAIN (0)
- NOGA_JAPAN (0)
- SANWASEISAKUSYO (0)
- WIDIA (0)
- KOSHUHA (0)
- TUNGALOY (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy