(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
OSG Ball End Mills (Carbide)（work material：Quenched and tempered steel）
| Days to Ship |
|
|---|
-
Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6
OSG
Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.
Standard Price: MYR 602.44- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-MG-EBD
OSG
Machining is possible with a wide range of materials, from general materials to hardened steel. Also usable with high-speed machining center.
Standard Price: MYR 551.46- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-SS-EBD
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
Standard Price: MYR 599.23 Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-MG-EBD-3
OSG
A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.
Coated for steel
Standard/Alteration category: Manufacturer's standard product
Number of flutes (pcs.) 2
Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)
R Accuracy (µm) ±10Standard Price: MYR 499.80- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute MG-EBD-3
OSG
Uses high-toughness carbide with high transverse rupture strength.
Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)Standard Price: MYR 382.14- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute CBN-EBD
OSG
2-Flute Ball End Type CBN-EBD
·Demonstrates high performance in machining high-rigid materials and cast iron
·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.Standard Price: MYR 1,842.06- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute CBN-SXB
OSG
Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide
Standard Price: MYR 985.37- Days to Ship: 5 Day(s) or more -
OSG
High toughness carbide alloy is used, providing a long service life at medium to low speeds
Standard Price: MYR 1,940.39- Days to Ship: 5 Day(s) or more -
OSG
A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.
Standard Price: MYR 198.96 Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute WXS-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.
Standard Price: MYR 179.30 Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute WXL-HS-EBD
OSG
WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas
Standard Price: MYR 105.63- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-EBD-6
OSG
High-precision ball end mill for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers. Super ultra-fine particle carbide base metal realizes long life for hardened steel high-speed machining.
Standard Price: MYR 527.83- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 720.77 Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute for Heavy Cutting FX-HS-EBDS
OSG
Ball end mill for heavy cutting that enables high speed and high efficiency (large cutting depth). Short overall length which fits shrink-fit and HSK types perfectly.
Standard Price: MYR 518.46- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute WXE-HS-EBD
OSG
Ultra-high grade accuracy and precision ball end mill series for better craftsmanship. Short length that perfectly fits the HSK shrink holder. The product accuracy warranty sheet is included for HP3 specification types.
Standard Price: MYR 685.75 Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-HO-MG-EBD
OSG
The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.
Standard Price: MYR 763.81- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FXS-HO-EBDS
OSG
Ball end mill for high-hardness steel with an oil hole that has achieved superb tool rigidity.
Standard Price: MYR 799.69- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute FX-PC-MG-EBD
OSG
Pencil neck with high rigidity provides excellent cutting even with large protrusion length.
Standard Price: MYR 667.68- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute WXL-PC-EBD
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applicationsStandard Price: MYR 181.04- Days to Ship: 5 Day(s) or more -
Long Pencil-neck Type, 2-Flute FX-PCL-EBD
OSG
Ball end mill for deep-engraving in places that cannot be reached with ordinary end mills.
Standard Price: MYR 1,997.79- Days to Ship: 5 Day(s) or more -
Pencil-Neck Type, 3-Flute PHX-PC-DBT
OSG
Realizes high efficiency machining that will change the way you think about deep engraving. The unique spiral ball blade prevents vibration during deep-engraving and achieves stable high-feed cutting.
Standard Price: MYR 504.27- Days to Ship: 5 Day(s) or more -
Ball End Type, 3-Flute PHX-DBT
OSG
Ball end mill with a new design that's given a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
Standard Price: MYR 668.86- Days to Ship: 5 Day(s) or more -
OSG
The spherical cutting edge prevents chattering even when processing vertical walls. Also allows undercut machining.
Standard Price: MYR 527.07- Days to Ship: 5 Day(s) or more -
OSG
Ball end mill with spherical cutting edge developed for shrink fitting.
Standard Price: MYR 1,120.42 Days to Ship: 5 Day(s) or more -
Ball-End Type, 2-Flute For finishing FX-H-EBD
OSG
Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.
Standard Price: MYR 490.53- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute WXL-EBD
OSG
[Features]
· High-accuracy ball end mill coated with WXL hard lubricating film coating.
Proven performance on a wide range of work materials.
Long life regardless of whether being used for dry-type or wet-type machining.Standard Price: MYR 89.68- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | ||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| R Size(mm) | 0.1 ～ 2 | 0.5 ～ 15 | 3 | 0.2 ～ 1.5 | 0.05 ～ 1.5 | 3 ～ 6 | 0.2 ～ 1.5 | 6.5 ～ 12.5 | 0.6 | 2 | 0.1 ～ 6 | 0.1 ～ 3 | 3 | 0.5 ～ 6 | 4 | 3 ～ 10 | 3 ～ 10 | 0.3 ～ 6 | 0.1 ～ 6 | 2 ～ 6 | 0.5 ～ 6 | 0.5 ～ 10 | 0.5 ～ 6 | 10 | 0.5 ～ 6 | 0.05 ～ 10 |
| Blade length (ℓ)(mm) | 0.16 ～ 3.2 | 2.5 ～ 55 | 12 | 0.8 ～ 8 | 0.2 ～ 8 | 4 ～ 7 | 0.3 ～ 1.8 | 26 ～ 50 | 3 | 4 | 0.4 ～ 18 | 0.2 ～ 6 | 12 | 1 ～ 12 | 8 | 12 ～ 38 | 6 ～ 20 | 0.6 ～ 22 | 0.16 ～ 12 | 8 ～ 22 | 1.5 ～ 18 | 1.5 ～ 30 | 0.7 ～ 8.1 | 15 | 1 ～ 12 | 0.2 ～ 38 |
| Underneck length (ℓ1)(mm) | 1 ～ 30 | - | - | - | - | 20 | 1.2 ～ 6 | - | - | 8 | - | 1.1 ～ 9 | - | 2.5 ～ 30 | 16 | - | - | 10 ～ 80 | 1 ～ 80 | 100 ～ 140 | 6 ～ 160.8 | - | 5 ～ 60 | - | 2.5 ～ 30 | - |
| Shank diameter (d)(mm) | 6 | 4 ～ 25 | 5 | 3 | 3 | 6 ～ 12 | 4 ～ 6 | 12 ～ 25 | 4 | 4 | 4 ～ 12 | 6 | 6 | 6 ～ 12 | 8 | 6 ～ 20 | 6 ～ 20 | 6 ～ 16 | 4 ～ 16 | 10 ～ 16 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 12 | 6 ～ 12 | 4 ～ 20 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 50 ～ 100 | 50 ～ 180 | 120 | 40 | 40 | 90 ～ 110 | 45 ～ 50 | 110 ～ 180 | 50 | 60 | 35 ～ 70 | 50 | 140 | 50 ～ 80 | 60 | 90 ～ 160 | 90 ～ 160 | 60 ～ 160 | 45 ～ 160 | 200 ～ 250 | 60 ～ 220 | 60 ～ 200 | 60 ～ 110 | 58 | 50 ～ 80 | 40 ～ 160 |
| work material | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] |
| R Precision(μm) | -0.005～+0.005 | -0.01～+0.01 | -0.01～+0.01 | -0.01～+0.01 | - | -0.01～+0.01 | -0.005～+0.005 | - | -0.01～+0.01 | -0.007～+0.007 | -0.007～+0.003 ～ -0.005～+0.005 | -0.005～+0.005 | -0.01～+0.01 | -0.015～+0.015 ～ -0.01 | -0.003～+0.003 | -0.01～+0.01 | -0.01～+0.01 | -0.01～0.01 | -0.005 to +0.005 ～ -0.005～+0.005 | -0.01～0.01 | - | -0.01～+0.01 | - | -0.01～+0.01 | -0.01～+0.01 | -0.007 to 0.003 ～ ±0.01 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | For General Steels (AlCrN, etc.) |
| Type | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Spherical Ball | Spherical Ball | Ball | Ball |
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- 0.075
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.275
- 0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- 0.55
- 0.6
- R0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 25
-
Blade length (ℓ)(mm)
-
0.01～0.95
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.08
- 0.1
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.3
- 0.38
- 0.4
- 0.45
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.7
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
-
1～1.8
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.26
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.5
- 9
- 9.5
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.5
-
12～12.5
- 12
- 12.5
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
28
-
29
-
30
-
32
-
34
-
35
-
36
-
38
-
40
-
45
-
48
-
50
-
55
-
58
-
60
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
- Ball
- Tapered neck ball
- Spherical Ball
Narrow search by specifying Manufacturer
-
- MISUMI (23)
- OSG (26)
- NS TOOL (21)
- DIJET (7)
- NACHI (6)
- OKAZAKI SEIKO (5)
- THE_CUT (5)
- ATOM (3)
- SANDVIK (3)
- 7 LEADERS (2)
- ASAHI TOOLS (2)
- KYOCERA (2)
- SANKO MFG (2)
- EIKOSHA (1)
- KYOWA SEIKO (1)
- SPEED TIGER (1)
- SUMITOMO_ELEC_ (1)
- WIDIN (1)
- VAN_HOORN (0)
- GUHRING (0)
- CREATE TOOL (0)
- UNION TOOL (0)
- MAPAL (0)
CAD
-
- 2D
- 3D
Related Categories to Ball End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy