(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
OSG Carbide Ball End Mills（Coating：Non-Coated）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
Ball End Type, 2-Flute MG-EBD-3
OSG
Uses high-toughness carbide with high transverse rupture strength.
Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)Standard Price: MYR 382.14- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute CBN-EBD
OSG
2-Flute Ball End Type CBN-EBD
·Demonstrates high performance in machining high-rigid materials and cast iron
·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.Standard Price: MYR 1,842.06- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute CBN-SXB
OSG
Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide
Standard Price: MYR 985.37- Days to Ship: 5 Day(s) or more -
OSG
High toughness carbide alloy is used, providing a long service life at medium to low speeds
Standard Price: MYR 1,940.39- Days to Ship: 5 Day(s) or more -
Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CAP-EBD
OSG
Ball end mill for copper, aluminum alloy, and plastic. Highly sharp with good chip discharge.
Standard Price: MYR 405.53- Days to Ship: 5 Day(s) or more -
End Long Ball Type , 2-Flute for Graphite GF-EBDL
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance, achieving a long working life for graphite machining.
Standard Price: MYR 1,108.19- Days to Ship: 5 Day(s) or more -
Ball-End Type, 2-Flute for Graphite GF-EBDR
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance, achieving a long working life for graphite machining.
Standard Price: MYR 907.30- Days to Ship: 5 Day(s) or more -
Long Shank Ball Type, 2-Flute for Graphite GF-LS-EBDR
OSG
Adopts carbide alloy as the base material for extremely excellent wear resistance, achieving a long working life for graphite machining.
Standard Price: MYR 1,050.79- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute CBN-LN-SXB
OSG
2-Flute Long Neck Ball End Type CBN-LN-SXB
·Achieves deep cut milling even with small diameters. Good cutting quality.
With the effect of spiral gash, both cutting edge strength and sharpness are achieved.
·CBN sintered body is used for the flute material.Standard Price: MYR 871.43- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Ball End Type, 2-Flute for Copper /Aluminum Alloy / Plastic CAP-EBD | ||||||||
| CAD |
|
|
|
|
| ||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| R Size(mm) | 0.05 ～ 1.5 | 3 ～ 6 | 0.2 ～ 1.5 | 6.5 ～ 12.5 | 0.5 ～ 3 | 1 ～ 6 | 1 ～ 6 | 1 ～ 6 | 0.2 ～ 1.5 |
| Blade length (ℓ)(mm) | 0.2 ～ 8 | 4 ～ 7 | 0.3 ～ 1.8 | 26 ～ 50 | 2.5 ～ 12 | 20 ～ 130 | 10 ～ 65 | 10 ～ 65 | 0.3 ～ 1.8 |
| Underneck length (ℓ1)(mm) | - | 20 | 1.2 ～ 6 | - | - | 25 ～ 80 | 20 ～ 85 | 25 ～ 130 | 2 ～ 15 |
| Shank diameter (d)(mm) | 3 | 6 ～ 12 | 4 ～ 6 | 12 ～ 25 | 4 ～ 6 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 40 | 90 ～ 110 | 45 ～ 50 | 110 ～ 180 | 60 ～ 90 | 100 ～ 200 | 75 ～ 130 | 100 ～ 200 | 45 ～ 50 |
| work material | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Graphite[◎] | Graphite[◎] | Graphite[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] |
| R Precision(μm) | - | -0.01～+0.01 | -0.005～+0.005 | - | -0.01～+0.01 | - | - | - | -0.01～+0.01 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
| Coating | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Type | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball |
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- R0.9
- 0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 25
-
Blade length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.5
- 9
- 9.5
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.5
-
12～12.5
- 12
- 12.5
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
28
-
29
-
30
-
32
-
34
-
35
-
36
-
38
-
40
-
45
-
48
-
50
-
55
-
58
-
60
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Narrow search by specifying Manufacturer
-
- MISUMI (5)
- NS TOOL (15)
- OSG (9)
- DIJET (5)
- UNION TOOL (4)
- ATOM (3)
- ASAHI TOOLS (2)
- OKAZAKI SEIKO (2)
- NACHI (1)
- VAN_HOORN (1)
- SPEED TIGER (0)
- SUMITOMO_ELEC_ (0)
- GUHRING (0)
- CREATE TOOL (0)
- THE_CUT (0)
- KYOCERA (0)
- MAPAL (0)
- 7 LEADERS (0)
- SANDVIK (0)
- WIDIN (0)
- KYOWA SEIKO (0)
- SANKO MFG (0)
- EIKOSHA (0)
CAD
-
- 2D
- 3D
Related Categories to Carbide Ball End Mills
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy