(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
ORIENTAL MOTOR Small AC Motors（Type：Motor Only）
| Days to Ship |
|
|---|
-
Induction Motor, World K2 Series
ORIENTAL MOTOR
Compliant with international safety standards, compatible with global voltages
[Features]
· Compliant with international safety standards.
· All models are compliant with international safety standards and have overheating protection equipment built in.
· UL/CSA standards certified.
Chinese compulsory product authorization system (CCC system) certified.
CE marking (low voltage directive) compliant.
· Motor overheat protection device built in.
Thermal protection, impedance protection.
· Supports Japan domestic and major foreign country power supply voltages.
· Can be quickly obtained even overseas when required.
· Can be combined with orthogonal shaft gearhead to achieve device space savingStandard Price: MYR 317.51- Days to Ship: 1 Day(s) or more -
ORIENTAL MOTOR
- Induction Motor, K Series from ORIENTAL MOTOR.
- World K Series models that conform to power supply voltages in Asia are certified under the CCC System and have built-in overheat protection devices.
- These models provide high cost performance with the same functions as K Series models that conform to global power supply voltages.
- The product lineup includes models with output power from 1 W to 150 W.Standard Price: MYR 291.57- Days to Ship: 9 Day(s) or more -
Speed Control Motor, World K2 Series
ORIENTAL MOTOR
- Speed Control Motor, World K2 Series from ORIENTAL MOTOR.
- A lineup that includes single-phase 100 VAC, 110, VAC, 115 VAC, 200 VAC, 220 VAC and 230 VAC specifications as well as output power of 6 to 40 W is provided.
- The dimension of square flange can be selected from 60 to 90 mm.
- Inside an enclosure that is installed indoors (provide vent holes).
- Operating ambient temperature 0 to 50 °C (non-freezing).
- Operating ambient humidity 85%, maximum (non-condensing).Standard Price: MYR 395.18- Days to Ship: 9 Day(s) -
Unit Type Speed Control Motor, US Series, Single Motor
ORIENTAL MOTOR
- Unit Type Speed Control Motor, US Series, Single Motor from ORIENTAL MOTOR.
- The US Series is a panel mounted control unit and speed control motor package.
- Wiring is performed through an easy connection method utilizing connectors.
- This series is optimal for easy speed control applications. The speed can be set easily with the potentiometer on the front panel of the control unit.
- The instantaneous stop function is not available.Standard Price: MYR 400.24- Days to Ship: 1 Day(s) or more -
Speed Control Motor, Induction Type, K Series
ORIENTAL MOTOR
- Speed Control Motor, Induction Type, K Series from ORIENTAL MOTOR.
- A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 6 to 60 W is provided.
- The dimension of square flange can be selected from 60 to 90 mm.
- Inside an enclosure that is installed indoors (provide vent holes).
- Operating ambient temperature −10 to +40 °C (+14 to +104 °F) (non-freezing).
- Operating ambient humidity 85%, maximum (non-condensing).Standard Price: MYR 379.36- Days to Ship: 27 Day(s) or more -
Torque Motor K Series/World K Series, Individual Motor
ORIENTAL MOTOR
Optimal for applications that require torque adjustments, such as winding, presser applications, etc.
[Features]
· Torque motor that conforms to international safety standards (excluding 40W).
· Motor rotation speed and torque can be adjusted by installing an external voltage adjuster.
· Torque motor unit TM series that combines with a power controller that is capable of easily adjusting torque is also availableStandard Price: MYR 431.46- Days to Ship: 9 Day(s) or more -
Induction Motor, World K Series (RoHS Non-Compliant)
ORIENTAL MOTOR
Induction motor with thermal protector for signals 25 W, 40 W, 60 W, 90 W Lead wire type, type with terminal box.
[Features]
・ Built-in thermal protector for signals
・ Global voltage compatible
・ CE markingStandard Price: MYR 554.38- Days to Ship: 17 Day(s) or more -
Standard Price: MYR 902.91- Days to Ship: 18 Day(s) or more -
Motor for AC Speed Control Unit
ORIENTAL MOTOR
- Motor for AC Speed Control Unit from ORIENTAL MOTOR.
- A lineup that includes single-phase 100 VAC, 110 VAC, 115 VAC, 200 VAC, 220 VAC and 230 VAC, specifications as well as output power of 6 to 90 W is provided.
- The dimension of square flange can be selected from 60 to 90 mm.
- Wide Variety of Products Gearheads are available with 26 different gear ratios from 1:2 to 1:360.Standard Price: MYR 520.16- Days to Ship: 12 Day(s) or more -
ORIENTAL MOTOR
Compared with other AC small standard motors, the C and B motor can start and stop more quickly, and has excellent responsiveness. Appropriate for one-direction applications that continuously and frequently start and stop.
[Features]
· High-accuracy, high-response clutch and brake enable high-frequency starts and stops.
· No-contact control of the clutch and brake operation is possible if a C and B controller (sold separately) is used.
· Compact design for easy handling.
· Drive parts can be clustered neatly together without taking up space.
· The C and B motor GC dedicated gearhead and the GCH gearhead emphasize impact resistance, have been made stronger, have been specialized, and boast improved reliability (the GN gearhead and other gearheads cannot be mounted).
· For induction motors, lead wire type, type with small terminal box, and speed control type are available.
· Also, an abundant array of power supply specifications are available: single-phase 100V and 200V, and three-phase 200VStandard Price: MYR 2,118.64- Days to Ship: 17 Day(s) -
Induction Motor, BH Series, Single-Unit Motor
ORIENTAL MOTOR
- Induction Motor, BH Series, Single-Unit Motor from ORIENTAL MOTOR.
- Induction motors are optimal for uni-directional and continuous operation, such as a conveyor system.
- Induction motors can be operated easily from an AC power supply.
- These motors achieve a high output of 200 W (1/4 HP) with a frame size of 104 mm (4.09 inch).
- With each combination type, the motor and gearhead come pre-assembled for easy installation into your equipment.Standard Price: MYR 838.20- Days to Ship: 17 Day(s) or more -
Speed Control Motor, Reversible Type, K Series
ORIENTAL MOTOR
- Speed Control Motor, Reversible Type, K Series from ORIENTAL MOTOR.
- A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 6 to 40 W is provided.
- The dimension of square flange can be selected from 60 to 90 mm.
- Inside an enclosure that is installed indoors (provide vent holes).
- Operating ambient temperature −10 to +50 °C (+14 to +122 °F) (non-freezing).
- Operating ambient humidity 85%, maximum (non-condensing).Standard Price: MYR 397.71 Days to Ship: 9 Day(s) or more -
Speed Control MotorInduction TypeSingle Unit Motor
ORIENTAL MOTOR
- Speed Control Motor, Induction Type, Single Unit Motor, MSS series from ORIENTAL MOTOR.
- This product is a compact no-contact speed control motor, with 3W and 42 mm mounting angle.
- The shape end of shaft has 2 types available, round shaft type for MSM003-003 and Pinion shaft type for MSM003-403.
- Motor lead wire includes 5 stranded wires with 300 mm length (UL style 3266, AWG24).
- The weight of the motor is 0.35 kg.Standard Price: MYR 394.80 Days to Ship: 48 Day(s) or more -
ORIENTAL MOTOR
[Features]
・ Ideal for one-way, continuous operation
・ You can drive easily
・ Excellent motor performance
・ Compatible with protection rating IP66 (Type with terminal box)
・ Equipped with a low profile terminal box (Type with terminal box)
・ Gearhead design points
・ Equipped with high-performance gearheadStandard Price: MYR 388.75- Days to Ship: 17 Day(s) or more -
Standard Price: MYR 505.81- Days to Ship: 17 Day(s) or more -
Single Unit Reversible Motor, World K2 Series
ORIENTAL MOTOR
Individual motor product from the world K series usable in Japan and throughout the world.
[Features]
· Conforms to international safety standards.
· All models are compliant with international safety standards and have overheating protection equipment built in.
· UL/CSA standards certified.
Chinese compulsory product authorization system (CCC system) certified.
CE marking (low voltage directive) compliant.
· Motor overheat protection device built in.
Thermal protection, impedance protection.
· Supports Japan domestic and major foreign country power supply voltages.
· Can be quickly obtained even overseas when required.
· Can be combined with orthogonal shaft gearhead to achieve device space savingStandard Price: MYR 340.94- Days to Ship: 9 Day(s) or more -
Extra Low Speed Synchronous Motor SMK Series for AC Power Supplies
ORIENTAL MOTOR
Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation. Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."
Standard Price: MYR 347.59- Days to Ship: 9 Day(s) or more -
Extra Low Speed Synchronous Motor, SMK Series
ORIENTAL MOTOR
Continuous rated synchronization motor capable of instant forward/reverse operation
[Features]
· Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation.
· Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."
· Rotates precisely in sync with power supply frequency.
· Rotation speed does not change even if load fluctuates.
· Capacitor-run motor that can be easily run with just a capacitor (for the SMK5 type, external resistance is also required.
· Capable of continuous rated drive in both forward and reverse operation.
· Motor is capable of starting, stopping, and forward/reverse operation within 1.5 cycles of the power supply frequency (0.03 seconds if 50Hz, and 0.025 if 60Hz).
· Optimal for transport conveyors that start and stop repeatedly, etc.
· Rotates at a fixed speed even in lowering state.
· Also appropriate for elevator mechanisms and the like for which a drive with a consistent speed is desired for up/down motion
·
· Extra low-speed synchronous motors have the same structure as stepping motors and use a permanent magnet in their rotors, which gives them slight retention force even as-is.
· A relatively large retention force can be used by using a gearhead. Convenient for mounting green dampers for absorbing shock, slit panels for origin searching, etc.Standard Price: MYR 365.15- Days to Ship: 9 Day(s) or more -
Increased Safety Explosion Proof Type Motor, K Series
ORIENTAL MOTOR
Motor with improved insulation performance and other safety factors against danger, damage, etc. caused by increased ambient temperature so that it can be used in hazardous places with a risk of generation of explosive gas, flammable gas, etc. Has completely closed structure, which makes it impossible for the insulated charging component to come into contact with exterior and also prevents dust and the like from entering.
Standard Price: MYR 1,237.69- Days to Ship: 27 Day(s) -
Single-Unit Motor with Electromagnetic Brake, World K2 Series
ORIENTAL MOTOR
Compatible with global voltages
[Features]
· Compliant with international safety standards.
· All models are compliant with international safety standards and have overheating protection equipment built in.
· UL/CSA standards certified.
Chinese compulsory product authorization system (CCC system) certified.
CE marking (low voltage directive) compliant.
· Motor overheat protection device built in.
Thermal protection, impedance protection.
· Supports Japan domestic and major foreign country power supply voltages.
· Can be quickly obtained even overseas when required.
· Can be combined with orthogonal shaft gearhead to achieve device space savingStandard Price: MYR 724.15- Days to Ship: 9 Day(s) or more -
Reaction Synchronous Motor K Series
ORIENTAL MOTOR
A reaction synchronous motor is a motor that rotates at a rotation speed that is synchronized with the power supply frequency. Single-direction continuous operation, and is appropriate for when a fixed rotation speed is desired even if the load fluctuates.
Standard Price: MYR 359.30- Days to Ship: 27 Day(s) or more -
ORIENTAL MOTOR
[Features]
・ Highly efficient and highly characteristic three-phase motor with optimal design
・ Achieves the best characteristics in combination with an inverter
・ Compatible with protection rating IP66 (Type with terminal box)
・ Equipped with stainless steel shaft as standard
・ Compatible with H1 grease for food machine
・ Compact and lightweight
・ Low profile terminal box (Type with terminal box)
・ International standards (UL/CSA standard, CCC system, CE marking)Standard Price: MYR 668.67- Days to Ship: 12 Day(s) or more -
Motors with Electromagnetic Brake BH series motor units
ORIENTAL MOTOR
Smallest size in its class but achieves 200W output.
Standard Price: MYR 2,165.83- Days to Ship: 17 Day(s) -
Pack-In Type Speed Control Motor Unit, PSH Series
ORIENTAL MOTOR
Control pack built into the back of the motor
[Features]
· Control pack and speed setting volume are built into the back of the motor.
· Wire connection not required. Operation is also simple.
· Variable speed range is 50Hz: 90 to 1400r/min and 60Hz90 to 1500r/min.
· Terminal box type. Appropriate for controlling forward rotation and reverse rotation with an external relay or the like.
· Plug cord type.
· Can be switched between forward rotation and reverse rotation with just a CW/CCW switch in the switch box.
· Simple connection just by connecting AC power cord with plug (2 m) to a commercial power supplyStandard Price: MYR 981.90- Days to Ship: 9 Day(s) or more -
ORIENTAL MOTOR
[Features]
・ Ideal for one-way, continuous operation
・ You can drive easily
・ Excellent motor performance
・ Compatible with protection rating IP66 (Type with terminal box)
・ Equipped with a low profile terminal box (Type with terminal box)
・ Gearhead design points
・ Equipped with high-performance gearheadStandard Price: MYR 414.78- Days to Ship: 17 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type |
| Motor Type |
| Square Flange Dim. A(mm) |
| Rated Output(W) |
| Power Supply |
| Reduction Ratio |
| Gear Head Type |
| Electromagnetic Brakes, Clutches |
| Environment |
| Voltage(V) |
| Voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR | ORIENTAL MOTOR |
| Product Series | Speed Control Motor – Motor Only for Unit, Induction Type, MSM Series | Extra Low Speed Synchronous Motor SMK Series for AC Power Supplies | Single-Unit Motor with Electromagnetic Brake, World K2 Series | ||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 1 Day(s) or more | 27 Day(s) or more | 9 Day(s) or more | 17 Day(s) or more | 18 Day(s) or more | 12 Day(s) or more | 17 Day(s) | 17 Day(s) or more | 9 Day(s) or more | 48 Day(s) or more | 17 Day(s) or more | 17 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 27 Day(s) | 9 Day(s) or more | 27 Day(s) or more | 12 Day(s) or more | 17 Day(s) | 9 Day(s) or more | 17 Day(s) or more |
| Type | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only | Motor Only |
| Motor Type | Induction | Induction | Induction ～ Reversible | Speed Control | Speed Control | Torque | Induction | Induction | Speed Control | Induction | Induction | Speed Control | Speed Control | Induction | Speed Control | Reversible | Extra Low Speed Synchronous | Extra Low Speed Synchronous | Induction | Induction ～ Reversible | Reaction Synchronous | Induction | Induction | Speed Control | Reversible |
| Square Flange Dim. A(mm) | 42 ～ 90 | 42 ～ 90 | 60 ～ 90 | 60 ～ 90 | 60 ～ 90 | 60 ～ 90 | 80 ～ 90 | 90 | 60 ～ 90 | 90 | 104 | 60 | 42 | 60 ～ 90 | 60 ～ 90 | 42 ～ 90 | 42 | 42 ～ 90 | 80 ～ 90 | 60 ～ 90 | 60 ～ 90 | 80 ～ 110 | 104 | 80 ～ 90 | 60 ～ 90 |
| Rated Output(W) | 1 ～ 150 | 1 ～ 90 | 6 ～ 40 | 6 ～ 90 | 6 ～ 60 | 3 ～ 20 | 25 ～ 90 | 60 ～ 90 | 6 ～ 90 | 40 ～ 90 | 200 | 6 | 3 | 6 ～ 90 | 6 ～ 90 | 1 ～ 90 | - | - | 25 ～ 40 | 6 ～ 90 | 3 ～ 25 | 30 ～ 200 | 200 | 25 ～ 40 | 6 ～ 90 |
| Power Supply | 3-Phase ～ Single-Phase | Single-Phase | Single-Phase | Single-Phase | Single-Phase | Single-Phase | 3-Phase ～ Single-Phase | 3-Phase ～ Single-Phase | Single-Phase | 3-Phase ～ Single-Phase | 3-Phase ～ Single-Phase | Single-Phase | Single-Phase | 3-Phase ～ Single-Phase | Single-Phase | Single-Phase | Single-Phase | Single-Phase | 3-Phase | 3-Phase ～ Single-Phase | Single-Phase | 3-Phase | 3-Phase | Single-Phase | Single-Phase |
| Reduction Ratio | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Gear Head Type | - | - | - | - | - | - | Parallel Shaft | - | Not Provided / Parallel Shaft | - | - | - | - | Not Provided / Parallel Shaft | - | - | - | - | - | - | - | Not Provided | - | - | Not Provided / Parallel Shaft |
| Electromagnetic Brakes, Clutches | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Electromagnetic Brakes | Not Provided / Electromagnetic Brakes | Electromagnetic Brakes / Clutch | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Electromagnetic Brakes | Not Provided | Not Provided / Electromagnetic Brakes | Electromagnetic Brakes | Not Provided | Not Provided / Electromagnetic Brakes |
| Environment | Standard / Waterproof / Dust Resistant | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Waterproof / Dust Resistant | Standard | Standard | Standard / Explosion Proof | Standard / Waterproof / Dust Resistant | Standard | Standard | Standard | Standard | Standard |
| Voltage(V) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Voltage | 100 ～ 415 | 100 ～ 200 | 100 ～ 230 | 100 ～ 200 | 100 ～ 200 | 100 ～ 230 | 100 ～ 230 | 100 ～ 200 | 100 ～ 230 | 100 ～ 220 | 100 ～ 415 | 100 | 100 | 100 ～ 230 | 100 ～ 200 | 100 ～ 230 | 24 | 100 ～ 230 | 200 | 100 ～ 230 | 100 ～ 115 | 200 ～ 415 | 200 ～ 230 | 100 | 100 ～ 200 |
Loading...
Configure
Specification/Dimensions
-
Type
- Motors
- Gear Head Only
- Motor Only
- Others
- Set
- Controller Only
- Motor group
-
Motor Type
-
Square Flange Dim. A(mm)
-
Rated Output(W)
-
Power Supply
-
Reduction Ratio
-
Gear Head Type
- Not Provided
- Parallel Shaft
- Perpendicular Shaft
- Linear
-
Electromagnetic Brakes, Clutches
- Not Provided
- Electromagnetic Brakes
- Clutch
-
Environment
-
Voltage(V)
-
Voltage
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Small AC Motors
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy