(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
NANSIN Wheels（Bearing：Provided）
| Days to Ship |
|
|---|
-
NANSIN
Urethane wheels for general-purpose casters.
[Features]
·It has excellent wear resistance and oil resistance, and has high mechanical strength while providing cushioning properties, so it can withstand a large amount of load.
·It has the advantage of minimizing contamination of the floor surface.
·Part number used: STM·SKM·SKM-T·UTM·UKM.
·wheel hardness: 92HS.
·Operating Temperature: -40 to +80°C .Standard Price: MYR 102.96- Days to Ship: 5 Day(s) or more -
NANSIN
Rubber wheels for general-purpose casters.
[Features]
·It is used in a wide range of applications both indoors and outdoors.
·Good cushioning properties ensure stable running performance even on slightly bumpy road surfaces.
·Part number used: STC (VS-100 only), SKC (VS-100 only), STM, SKM, SKM-T, SCP, SCJ, UTC, UKC
·wheel hardness: 65HS.
·Operating Temperature: -40 to +100°C .
·steel foil.
·Uses commercial bearings.Standard Price: MYR 83.14- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 88.68- Days to Ship: 5 Day(s) or more -
NANSIN
Monomer cast nylon wheel with high mechanical strength.
[Features]
·Monomer casting nylon wheel of stainless steel type.
·It has high mechanical strength and excellent impact resistance, oil resistance, and abrasion resistance.
·Cold-resistant grease is used, making it excellent for use at low temperatures.
·Since stainless steel is used for the bearings, it is difficult to rust.
[Applications]
·Wheels for casters used in conveying equipment such as food machinery, kitchen equipment, chemical and pharmaceutical machinery, wagons, dolly carts, etc.Standard Price: MYR 196.72- Days to Ship: 9 Day(s) or more -
NANSIN
Phenolic wheels with excellent heat resistance.
[Features]
·It has excellent dry heat resistance, oil resistance, and compression resistance.
·Due to its high hardness, it is resistant to deformation due to compression set, but on the other hand, it tends to increase resistance when driving over uneven road surfaces.
·Part number used: STC, SKC, STM, SKM, SKM-T, SU-STC, SU-SKC, THH, KHH.
·Operating Temperature: -40 to +150 degrees.
[Applications]
·Ideal for use in high heat environments.Standard Price: MYR 109.29- Days to Ship: 5 Day(s) or more -
NANSIN
Rubber wheels for general-purpose casters.
[Features]
·It is used in a wide range of applications both indoors and outdoors.
·Good cushioning properties ensure stable running performance even on slightly bumpy road surfaces.
·Wheel hardness is 65HS.
·The operating temperature is -40 to +100°C.
[Applications]
·Ideal as a caster wheel.Standard Price: MYR 70.39- Days to Ship: 5 Day(s) or more -
NANSIN
Monomer cast nylon wheel with high mechanical strength.
[Features]
·Monomer casting nylon wheels.
·It has higher mechanical strength than nylon, and has excellent impact resistance, oil resistance, and abrasion resistance.
·It has relatively high heat resistance and can withstand a large load.
·Operating Temperature: -10 to +150 degrees.
[Applications]
·Used as casters for heavy-duty transport pallets, semiconductor manufacturing equipment, and various types of machinery.Standard Price: MYR 213.70- Days to Ship: 7 Day(s) or more -
NANSIN
Nylon wheels with excellent water and oil resistance.
[Features]
·It has excellent water and oil resistance, and its high hardness makes it resistant to permanent deformation.
[Applications]
·Various transportation carts, mesh pallets, special pallets for parts transportation, etc.
·Wheels for casters used in various factory equipment.Standard Price: MYR 89.31 Days to Ship: 7 Day(s) or more -
NANSIN
Rubber wheels with excellent drivability.
[Features]
·It has good cushioning properties and exhibits stable running performance even on slightly bumpy road surfaces.
·Part number used: SMO·GMO·EXMO
·wheel hardness: 70HS.
·Operating Temperature: -40 to +100 degrees.
[Applications]
·For casters used in fixtures, furniture, wagons, medical equipment, transportation equipment, and various devices.Standard Price: MYR 59.38 Days to Ship: 5 Day(s) or more -
NANSIN
Nylon wheels with excellent water and oil resistance.
[Features]
·It has excellent water and oil resistance, and its high hardness makes it resistant to permanent deformation.
·Part number used: STC/SKC/SKC-T/SSC/SPC/SU-STC/SU-SKC/30 series.
·Operating Temperature: -10 to +120 degrees.
[Applications]
·Wheels for casters used in various transport carts, mesh pallets, and special parts transport pallets.
·Wheels for casters used in various factory equipment, wagons, various kitchen equipment, etc.Standard Price: MYR 64.96- Days to Ship: 7 Day(s) or more -
NANSIN
Urethane wheels with excellent wear resistance and oil resistance.
[Features]
·It has cushioning properties and high mechanical strength, so it can withstand a large load. It also has the advantage of minimizing contamination of the floor surface.
·Part number used: STC/SMS/GMS/TM/KM/SM/GM/10 series.
·wheel hardness: 90HS.
·Operating Temperature: -40 to +80 degrees.
[Applications]
·Wheels for casters used for various transportation carts, mesh pallets, special pallets for parts transportation, etc.
·Wheels for casters used in various factory equipment, wagons, various kitchen equipment, etc.Standard Price: MYR 61.86- Days to Ship: 5 Day(s) or more -
NANSIN
Urethane wheels with excellent wear resistance and oil resistance.
[Features]
·It has high mechanical strength and excellent wear and oil resistance.
·Part number used: STH·SKH.
·wheel hardness: 95HS.
·Operating Temperature: -40 to +80 degrees.
[Applications]
·Wheels for casters used in high-load transport pallets, semiconductor manufacturing equipment, and various types of machinery.Standard Price: MYR 198.51 Days to Ship: 10 Day(s) or more -
NANSIN
A rubber wheel.
[Features]
· Features a stainless steel wheel, rubber wheel, and stainless steel needle bearing.
· Filled with cold-resistant greaseStandard Price: MYR 133.82 Days to Ship: 10 Day(s) or more -
NANSIN
Rubber wheels with excellent drivability.
[Features]
·It has good cushioning properties and exhibits stable running performance even on slightly bumpy road surfaces.
[Applications]
·Wheels for casters used in various transport carts, special pallets for transporting parts, various factory equipment, etc.Standard Price: MYR 45.10 Days to Ship: 1 Day(s) -
NANSIN
Industrial pneumatic rubber wheels.
[Features]
·Pneumatic rubber wheels with excellent running performance.
·Part number used: STM,SKM.
·wheel hardness: 60HS.
·Operating Temperature: -10 to +60 degrees.
[Applications]
·The pneumatic rubber wheels suppress vibrations to objects while driving, and can be widely used even on uneven road surfaces.Standard Price: MYR 254.28- Days to Ship: 10 Day(s) or more -
NANSIN
Monomer cast nylon wheel with high mechanical strength.
[Features]
·It has high mechanical strength and excellent impact resistance, oil resistance, and abrasion resistance.
·Part number used: STM·SKM·SKM-T.
·Operating Temperature: -10 to +150 degrees.
[Applications]
·Wheels for casters used for various transportation carts, mesh pallets, special pallets for parts transportation, etc.
·Wheels for casters used in various factory equipment.Standard Price: MYR 121.94- Days to Ship: 2 Day(s) or more -
NANSIN
Nylon wheels with stainless steel bearings.
[Features]
·It has excellent water and oil resistance, and its high hardness makes it resistant to permanent deformation.
·Part number used: SU-STC·SU-SKC.
·Operating Temperature: -10 to +120 degrees.
[Applications]
·Wheels for casters used in food machinery, kitchen equipment, chemical and pharmaceutical machinery, and transport equipment for wagons.
·Wheels for casters used in transportation equipment such as dollies.Standard Price: MYR 67.14- Days to Ship: 10 Day(s) or more -
NANSIN
Rubber wheels with excellent drivability.
[Features]
·It is used in a wide range of applications both indoors and outdoors.
·Good cushioning properties ensure stable running performance even on slightly bumpy road surfaces.
·Part number used: STH·SKH.
·wheel hardness: 80HS.
·Operating Temperature: -40 to +100 degrees.
[Applications]
·Wheels for casters used in high-load transport pallets, semiconductor manufacturing equipment, and various types of machinery.Standard Price: MYR 104.56- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 195.09 Days to Ship: 9 Day(s) or more -
Standard Price: MYR 66.19 Days to Ship: 7 Day(s) or more -
Standard Price: MYR 137.82 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 130.52 Days to Ship: 9 Day(s) or more -
Standard Price: MYR 57.48 Days to Ship: 7 Day(s) or more -
Standard Price: MYR 76.92 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 225.26- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Wheel Outer Dia.(Ø) |
| Max. Load / Allowable Load(daN) |
| Max. Load / Allowable Load(kg) |
| Tire Material |
| Width of Wheel(mm) |
| Wheel Type |
| Bearing |
| Width of Hub(mm) |
| Hole Diameter(Ø) |
| Wheel Material |
| Wheel Width (Dual-Wheel Type) × 2(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN | NANSIN |
| Product Series | |||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 1 Day(s) | 10 Day(s) or more | 2 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Wheel Outer Dia.(Ø) | 75 ～ 250 | 100 ～ 250 | 125 ～ 150 | 100 ～ 200 | 65 ～ 75 | 125 ～ 150 | 100 ～ 150 | 125 | 102 | 100 ～ 150 | 75 ～ 100 | 100 | 125 | 75 | 225 ～ 257 | 75 ～ 200 | 100 ～ 125 | 100 ～ 150 | 130 | 75 | 150 | 100 | 100 | 100 | 100 ～ 200 |
| Max. Load / Allowable Load(daN) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. Load / Allowable Load(kg) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tire Material | Urethane | Rubber | Rubber | Nylon | Plastic | Rubber | Nylon | Nylon | Rubber | Nylon | Urethane | Urethane | Rubber | Rubber | Rubber | Nylon | Nylon | Rubber | Plastic | Rubber | Plastic | Plastic | Plastic | Plastic | Urethane |
| Width of Wheel(mm) | 32 ～ 45 | 32 ～ 50 | 32 | 34 ～ 45 | 38 | 38 ～ 40 | 50 | 38 | 25 | 29 ～ 35 | 27 | 50 | 38 | 32 | 63 ～ 80 | 32 ～ 45 | 29 ～ 35 | 50 | 40 | 27 | 27 | 32 | 27 | 32 | 32 ～ 42 |
| Wheel Type | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Integrated | Integrated | Outer Ring + Wheel | Integrated | Integrated | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Integrated | Outer Ring + Wheel | Outer Ring + Wheel | Integrated | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel | Outer Ring + Wheel |
| Bearing | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided |
| Width of Hub(mm) | 35 ～ 64 | 42 ～ 64 | 42 ～ 56 | 45 ～ 56 | 41.5 | 55 | 53.5 ～ 58.5 | 55 | 32 | 42 ～ 56 | 32 | 57 | 56 | 36 | 82 | 35.6 ～ 55 | 45 ～ 56 | 57 ～ 60 | 52 | 32 | 41 | 42 | 31 | 42 | 54 ～ 70 |
| Hole Diameter(Ø) | 10 ～ 25 | 12 ～ 25 | 12 | 12 ～ 20 | 12 | 12 | 12 ～ 20 | 12 | 8 | 12 | 8 | 12 | 12 | 10 | 20 | 10 ～ 20 | 12 | 12 ～ 20 | 20 | 8 | 12 | 12 | 8 | 12 | 12 ～ 20 |
| Wheel Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Wheel Width (Dual-Wheel Type) × 2(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Wheel Outer Dia.(Ø)
-
Max. Load / Allowable Load(daN)
-
Max. Load / Allowable Load(kg)
- 40
- 45
- 50
- 60
- 70
- 75
- 80
- 82
- 85
- 90
- 100
- 102
- 110
- 115
- 120
- 122.4
- 123
- 130
- 132.6
- 135
- 142.8
- 150
- 153.0
- 160
- 163.2
- 170
- 174
- 175
- 180
- 184
- 195
- 200
- 204
- 205
- 210
- 220
- 225
- 230
- 250
- 255
- 260
- 270
- 280
- 290
- 295
- 300
- 306
- 320
- 325
- 330
- 340
- 345
- 350
- 360
- 380
- 385
- 390
- 400
- 408
- 410
- 430
- 440
- 445
- 450
- 480
- 500
- 520
- 530
- 535
- 550
- 560
- 570
- 580
- 600
- 610
- 615
- 620
- 640
- 650
- 670
- 680
- 685
- 695
- 700
- 750
- 780
- 800
- 805
- 820
- 830
- 840
- 850
- 870
- 900
- 950
- 960
- 980
- 1000
- 1100
- 1130
- 1150
- 1200
- 1250
- 1330
- 1350
- 1400
- 1500
- 2000
- 2500
-
Tire Material
-
Width of Wheel(mm)
-
Wheel Type
- Integrated
- Outer Ring + Wheel
-
Bearing
- Provided
- Not Provided
-
Width of Hub(mm)
-
Hole Diameter(Ø)
-
Wheel Material
- Steel
- Aluminum
- Plastic
-
Wheel Width (Dual-Wheel Type) × 2(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (2)
- GIFUSANKENKOGYO (35)
- SISIKU ADDKREIS (31)
- NANSIN (25)
- TOSEI SHARYO (17)
- YODONO (8)
- YUEI CASTER (8)
- TOHOKUSYARYO (6)
- OHINDUSTRIAL (2)
- POLYPENCO_JAPAN (2)
- ESCO (1)
- INOAC (1)
- TRUSCO NAKAYAMA (0)
CAD
-
- 2D
- 3D
Related Categories to Wheels
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy