(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
NAGAHORIKOGYO Screwdriver Bits（Whether there is a double-end function：Available）
| Days to Ship |
|
|---|
-
NAGAHORIKOGYO
[Features]
· A material based on and produced from abundant experience in quenching and machining in automobile assembly factories.
· Wide ranging lineup including M1.6 (1.5 mm width across flats) to M10 (8 mm width across flats) and 70 to 150 mm lengths.
· For tightening hex bolts and hex socket set screws, etc., with electric screwdrivers, etc.
· Uses a special bit material with high durability at a reasonable cost.
[Applications]
· Tightening hex socket bolts and set screws.Standard Price: MYR 15.53- Days to Ship: 8 Day(s) or more -
NAGAHORIKOGYO
[Features]
●Due to tightening while cutting the screw, the durability is increased for high torque tightening.
[Specification]
●Q'ty Per Pack (piece) :10
●Blade Edge:y2
●Hardness:G
●Shank Diameter: 6.35mmStandard Price: MYR 11.59- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 15.30- Days to Ship: 8 Day(s) or more -
NAGAHORIKOGYO
[Features]
· For tightening Phillips screws with electric screwdrivers, etc.
· Uses a special bit material with high durability at a reasonable cost.Standard Price: MYR 12.07- Days to Ship: 15 Day(s) -
NAGAHORIKOGYO
[Features]
· For tightening Phillips screws with electric screwdrivers, etc. (double-headed).
· Uses a special bit material with high durability at a reasonable cost.Standard Price: MYR 10.28- Days to Ship: 5 Day(s) or more -
NAGAHORIKOGYO
[Features]
· Bit for electric screwdrivers with torque control.
· Often used when it is necessary to tighten small screws of M4 or less and a thin shaft diameter is required.
[Applications] H series is for HIOS machine screws, DBX series is for delvo machine screws.Standard Price: MYR 12.28- Days to Ship: 5 Day(s) or more -
NAGAHORIKOGYO
[Features]
· It is suitable for assembling sashes for residential and office buildings and tightening tapping countersunk screws.
· Aluminum sash screws are made of stainless steel and have a shallow (+) part for a dedicated shape where standard (+) parts hit the bottom, fail to enter fully, and wear badly.
· For tightening screws used for aluminum sash (countersunk screws) with an electric screwdriver.
· Uses a special bit material with high durability at a reasonable cost.Standard Price: MYR 11.59- Days to Ship: 8 Day(s) or more -
NAGAHORIKOGYO
[Features]
· Holder that attaches to a screwdriver bit to magnetize the crossed tip.
· Utilizes a special magnet to exert powerful magnetic force.
[Applications]
· Auxiliary tool for tightening screws with electric screwdrivers, etc.
[Caution]
· Bit sold separatelyStandard Price: MYR 97.80- Days to Ship: 9 Day(s) or more -
Bit for DB (φ4 mm) Torx T Type Electric Screwdriver
NAGAHORIKOGYO
[Features]
· Good torque transmission efficiency, official licensed company.
· Uses a special steel with high durability at a reasonable cost.Standard Price: MYR 64.13- Days to Ship: 15 Day(s) -
Screwdriver Socket & Bit, B-35, Angle Screwdriver Bit
NAGAHORIKOGYO
[Features]
· For tightening Phillips screws with electric screwdrivers, etc.
· Uses a special bit material with high durability at a reasonable cost.Standard Price: MYR 8.99 Days to Ship: 15 Day(s) -
Screwdriver Socket & Bit, B-37, Single Bit
NAGAHORIKOGYO
[Features]
· For tightening Phillips screws with electric screwdrivers, etc.
· Uses a special bit material with high durability at a reasonable cost.Standard Price: MYR 13.82- Days to Ship: 8 Day(s) or more -
Screwdriver Socket & Bit, B-38, Insert Bit
NAGAHORIKOGYO
[Features]
· For tightening Phillips screws with electric screwdrivers, etc.
· Uses a special bit material with high durability at a reasonable cost.Standard Price: MYR 8.18- Days to Ship: 15 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip Type |
| shank diameter(mm) |
| Overall Length(mm) |
| Single Product Set Product |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) |
| Tip two-sided width size (mm) |
| Bit Quantity |
| Presence of magnet at the blade tip |
| Whether there is a double-end function |
| Tip size / flathead (-) blade thickness (mm) |
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NAGAHORIKOGYO | NAGAHORIKOGYO | NAGAHORIKOGYO | NAGAHORIKOGYO | NAGAHORIKOGYO | NAGAHORIKOGYO | NAGAHORIKOGYO | NAGAHORIKOGYO | NAGAHORIKOGYO | NAGAHORIKOGYO | NAGAHORIKOGYO | NAGAHORIKOGYO |
| Product Series | ||||||||||||
| Days to Ship | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 15 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 15 Day(s) | 15 Day(s) | 8 Day(s) or more | 15 Day(s) |
| Tip Type | Hex Type | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Screw Catch | Torx Type (Hexalobular) | Phillips (+) | Phillips (+) | Phillips (+) |
| shank diameter(mm) | 6.35 | 6.35 | 5 ～ 6.35 | 5 ～ 6.35 | 5 ～ 6.35 | 4 | 6.35 | - | φ4 | 6.35 | 6.35 | 6.35 |
| Overall Length(mm) | 70 ～ 150 | 65 ～ 150 | 50 ～ 100 | 50 ～ 200 | 45 ～ 300 | 40 ～ 100 | 65 ～ 150 | 13 | 44 ～ 64 | 23 | 45 ～ 200 | 25.4 |
| Single Product Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item |
| Tip size / Phillips (+) | - | No.2 | No.1 / No.2 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.0 / No.1 / No.2 | No.2 | - | - | No.1 / No.2 / No.3 | No.1 / No.2 | No.1 / No.2 / No.3 |
| Tip size / flathead (-) blade width (mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip two-sided width size (mm) | 1.5 ～ 8 | - | - | - | - | - | - | - | - | - | - | - |
| Bit Quantity | 10 | 10 | 10 | 10 | 10 | 10 | 10 | - | - | - | 10 | - |
| Presence of magnet at the blade tip | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Whether there is a double-end function | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Tip size / flathead (-) blade thickness (mm) | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip Type
- Phillips (+)
- Flathead (-)
- Hex Type
- Torx Type (Hexalobular)
- Ball Point Type
- Square Type (Square)
- Box Type
- Special Purpose
- Screw Catch
- Adapter
- Combination
- Other
-
shank diameter(mm)
-
Overall Length(mm)
- 10
- 12
- 13
- 15
- 16
- 18
- 19
- 20
- 20.5
- 22.5
- 23
- 24
- 25
- 25.4
- 26
- 27
- 28
- 29
- 29.5
- 30
- 32
- 33
- 33.3
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 44
- 45
- 48
- 50
- 52
- 54
- 55
- 56
- 57
- 59
- 60
- 63
- 64
- 65
- 65、85、110
- 65/110
- 66
- 70
- 71
- 74
- 75
- 77
- 80
- 82
- 85
- 89
- 90
- Mini ratchet: 93; bit: 25
- 94
- 95
- 100
- 105
- 108
- 110
- 115
- 120
- 122
- 125
- 130
- 135
- 140
- 150
- 152
- 168
- 170
- 200
- 205
- 210
- 250
- 300
- 450
-
Single Product Set Product
- Single Item
- Set Product
-
Tip size / Phillips (+)
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm)
-
Tip two-sided width size (mm)
-
Bit Quantity
-
Presence of magnet at the blade tip
- Available
- NA
-
Whether there is a double-end function
- Available
- NA
-
Tip size / flathead (-) blade thickness (mm)
Narrow search by specifying Manufacturer
-
- VESSEL (34)
- ANEX (21)
- NAGAHORIKOGYO (12)
- SUNFLAG (7)
- TOP (5)
- TRUSCO NAKAYAMA (5)
- KO-KEN TOOL (2)
- TONE (2)
- SMATO (1)
- WERA (1)
- EARTH MAN (0)
- E VALUE (0)
- HIT (0)
- SANDVIK (0)
- SIGNET (0)
- TRAD (0)
- BESTTOOL (0)
- HIRAI KOGU (0)
- HOZAN (0)
- KTC(KYOTO TOOL) (0)
- ATI (0)
- WIHA (0)
- EIGHT TOOL (0)
- HIOS (0)
- NAKAMURASEISAKU (0)
- SK 11 (0)
- TOHNICHI MFG (0)
- PB SWISS TOOLS (0)
- ESCO (0)
- OMISEIKI (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdriver Bits
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy