(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
NABEYA Jigs for Manual Tightening（Page2）
Search by specifying the lower class category
Clamping Parts (for Manual Tightening)
Clamp Units (for Manual Tightening)
Locating Elements (for Positioning Parts / Manual Tightening)
| Days to Ship |
|
|---|
-
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.
- CAD ：
- 2D
Standard Price: MYR 1,585.66- Days to Ship: 6 Day(s) or more -
NABEYA
With wrench operation from the side, the jaw is locked in the downward direction, and the workpiece does not rise up.
- CAD ：
- 2D
Standard Price: MYR 913.49- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 373.58- Days to Ship: 4 Day(s) or more -
NABEYA
Made of aluminum so doesn't scratch the base, clamps, etc. Convenient for use as a support jack for plastic clamp sets.
Standard Price: MYR 179.69- Days to Ship: 6 Day(s) or more -
NABEYA
It serves as the base for clamping the side of large-scale processing machine workpieces. Compatible with workpiece contact side tapped hole M 20 / Table mounting side slotted hole structure allows fine adjustment
Standard Price: MYR 727.75- Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· The tap hole opening is horizontal to the table. With stopper bolt.Standard Price: MYR 302.14- Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· Especially for large processing machinesStandard Price: MYR 1,651.91- Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· Especially for large processing machines. Cutting resistance is received with greater strength by clamping the step partStandard Price: MYR 1,793.81- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 1,526.14- Days to Ship: 6 Day(s) or more -
NABEYA
This product can clamp 2 workpieces at the same time. It has a compact structure and can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.
Standard Price: MYR 444.53- Days to Ship: 4 Day(s) or more -
NABEYA
[Features]
· Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
· Lifting prevention (generates force in the downward direction).
· Ideal for thin workpieces.
· Dovetail groove can withstand lateral force.
· Free Mounting PositionStandard Price: MYR 2,055.41- Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· 6800: SS400/6800NI: SUS304, 6800: Zinc-plated toggle-down clamp 6800.
· 6800S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.Standard Price: MYR 219.10- Days to Ship: 4 Day(s) or more -
NABEYA
[Features]
· SS400 and galvanized toggle down clamp 6803.
· 6803S: Since it has a structure where it cannot be operated unless the safety lever is gripped, it prevents error operation and malfunction.Standard Price: MYR 336.43- Days to Ship: 4 Day(s) or more -
NABEYA
6848VNI is made of stainless steel. The hook length can be adjusted.
Standard Price: MYR 367.16- Days to Ship: 4 Day(s) or more -
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.
- CAD ：
- 2D
Standard Price: MYR 1,307.66- Days to Ship: 6 Day(s) or more -
Low Edge Clamp (Double Sided Type)
NABEYA
It is a compact clamp that does not lift much. Ideal for machining thin, low-profile objects. There are three sizes of tightening bolts: M4, M6, and M12. It has a compact size and large stroke of 0.3 to 1.1. The guide groove of the main body shortens workpiece setup time (excluding LWC4). It has a structure that prevents chips from entering inside.
Standard Price: MYR 122.35- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 10,724.82- Days to Ship: 12 Day(s) or more -
Heavy Duty Toggle Side Clamp 6845
NABEYA
Can be used for either pushing or pulling. Clamping screw and rubber cap attached.
Standard Price: MYR 655.31 Days to Ship: 4 Day(s) or more -
Heavy Duty Toggle Hook Clamp 6849PH
NABEYA
Heavy-duty type hook clamp. The hook length can be adjusted.
Standard Price: MYR 1,526.19- Days to Ship: 6 Day(s) or more -
NABEYA
Clamp support screw jack is convenient for supporting a variety of clamps. When one unit is insufficient in operation or height, two or three units can be stacked together. (Only for same sizes) The attachment is convenient for supporting irregular objects.
Standard Price: MYR 174.07- Days to Ship: 4 Day(s) or more -
NABEYA
Can be selected from T-slot nut (T-groove type) / T-slot nut (tapped hole type).
Standard Price: MYR 771.54- Days to Ship: 4 Day(s) or more -
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 73.67 Days to Ship: 6 Day(s) or more -
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 27.59 Days to Ship: 8 Day(s) or more -
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 87.34 Days to Ship: 6 Day(s) or more -
NABEYA
This is the clamp unit part of the Clamp Unit 7110 series. M 12 mm, M 16 mm / Select from 2 types. Since it is a unit, nuts, bolts, support screws (height adjustment), etc., are included, so there is no need to assemble.
Standard Price: MYR 2,311.63- Days to Ship: 6 Day(s) or more -
NABEYA
This is a block for adjusting the height of the S-type swing clamp set. If the height of the S-type swing clamp set is not sufficient, select the S-type swing clamp joint. M 8 mm, M 16 mm / 2 types available
Standard Price: MYR 75.31- Days to Ship: 4 Day(s) or more -
NABEYA
Single-action clamp for vertical clamp. There is no troublesome screw feeding. The 6802S type also has a careless mistake reduction function that makes it impossible to operate without holding the safety lever.
Standard Price: MYR 259.00- Days to Ship: 4 Day(s) or more -
NABEYA
Suitable for tightening drum and can lids. The hook length can be adjusted.
Standard Price: MYR 438.44- Days to Ship: 6 Day(s) or more -
NABEYA
The structure prevents return unless the button is pressed, preventing erroneous operation and malfunction. Suitable for tightening drum and can lids. The hook length can be adjusted.
Standard Price: MYR 1,008.30 Days to Ship: 6 Day(s) or more -
NABEYA
[Features]
· Parts for universal clamps.
· It can steplessly fasten tall and short workpieces.Standard Price: MYR 264.60- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 88.05 Days to Ship: 4 Day(s) or more -
NABEYA
It is a part for toe adjustment clamp. The screw is common to all sizes. The manufacturer sell from parts
Standard Price: MYR 114.27 Days to Ship: 4 Day(s) or more -
PA Adjustment Bolt for Quick Lock
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 73.67- Days to Ship: 6 Day(s) or more -
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.
Standard Price: MYR 103.30 Days to Ship: 6 Day(s) or more -
NABEYA
Simply insert into the T-groove. Useful for receiving cutting resistance from the side.
Standard Price: MYR 230.54- Days to Ship: 6 Day(s) or more -
NABEYA
It will be the spacer part of the Clamp Unit 7111 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.
Standard Price: MYR 1,500.50- Days to Ship: 6 Day(s) or more -
NABEYA
It will be the spacer part of the Clamp Unit 7112 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.
Standard Price: MYR 1,146.04- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 1,024.54- Days to Ship: 6 Day(s) or more -
NABEYA
The workpiece is fixed in place by pulling it in from below. Minimal interference with the blade, ideal for 5-axis and composite machine clamps.
Standard Price: MYR 298.99- Days to Ship: 6 Day(s) or more -
NABEYA
Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
Standard Price: MYR 1,500.42- Days to Ship: 6 Day(s) or more -
NABEYA
6848HNI is made of stainless steel. The hook length can be adjusted.
Standard Price: MYR 367.42- Days to Ship: 6 Day(s) or more -
NABEYA
Achieve large fastening strength in restricted spaces. Can be used with two clamping methods.
Standard Price: MYR 467.95- Days to Ship: 6 Day(s) or more -
Universal Clamp Semi-Cylindrical Sealing Washer
NABEYA
[Features]
· Parts for universal clamps.
· The swivel pad fits on the workpiece and clamping surface for vertical tightening.
· Although this product is equipped with T-nuts, it can also be used with them removedStandard Price: MYR 60.46- Days to Ship: 4 Day(s) or more -
Low Edge Clamp (One Sided Type)
NABEYA
[Features]
· It is a compact clamp that does not lift much.
· Ideal for machining thin, low-profile objects.
· There are three sizes of tightening bolts: M4, M6, and M12.
· It has a compact size and large stroke of 0.3 to 1.1.
· The guide groove of the main body shortens workpiece setup time (excluding LWC4).
· It has a structure that prevents chips from entering inside.
· Ideal for small workpieces.
· Brass material is used to avoid scratching workpieces.
· Lifting up of the workpiece is minimal.
· Ideal for thin workpieces.Standard Price: MYR 75.76- Days to Ship: 4 Day(s) or more -
Heavy Duty Toggle Side Clamp 6842
NABEYA
Can be used for either pushing or pulling. Clamping screw and rubber cap attached.
Standard Price: MYR 880.26- Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Days to Ship | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more |
Loading...
Related Categories to Jigs for Manual Tightening
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy