MISUMI Joints（Shape：Straight）

• 

  Quick-Fitting Joints For Mold Cooling -Standard Type (Heat-Resistant 60degree Series) /Straight Joint Plug/For Spanner Installation-

  MISUMI

  [Features]
  ・Tube can be attached and detached with one touch.
  
  [Notes]
  ・M-PC and M-PCX are integrated products. Please note that it cannot be removed.
  ・Please use at water temperature below 60℃.
  ・Please keep surge pressure (instantaneous pressure applied due to impact flow, etc.) to below the maximum working pressure (1MPa).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	MYR 9.74-
  Days to Ship:	1 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Quick-Fitting Joints For Mold Cooling -Standard Type (Heat-Resistant 60degree Series) /Straight Joints /For Hexagonal Wrench Installation-

  MISUMI

  [Features]
  ・Tube can be attached and detached with one touch.
  
  [Notes]
  ・M-POC and M-POCL are integrated products. Please note that it cannot be removed.
  ・Please use at water temperature below 60℃.
  ・Please use by keeping the surge pressure (instantaneous pressure applied due to impact flow, etc.) to below the maximum working pressure (1MPa).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	MYR 10.15-
  Days to Ship:	1 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Bolting Joints For Mold Cooling -For High Temperature (Heat-Resistant 120degree Series) / Straight Joints-

  MISUMI

  [Characteristics]
  - It has a tube insert section and is tightened with a cap nut, so it connects and secures the tube securely.
  Also, torque management is not required.
  
  [Precautions]
  - Please use at a water temperature of 120℃ or less.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	MYR 16.37-
  Days to Ship:	1 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Quick-Fitting Joints For Mold Cooling -Integrated Plugs・Sockets/(Heat-Resistant 99degree Series)/Straight Joints-

  MISUMI

  [Features]
  ・Tube can be attached and detached with one touch.
  [Note]
  ・M-KC and M-KOC are integrated products. Please note that it cannot be removed.
  ・Please use at water temperature below 99℃.
  ・Please use by keeping the surge pressure (instantaneous pressure applied due to impact flow, etc.) to below the maximum working pressure (1MPa).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	MYR 11.88-
  Days to Ship:	1 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Quick-Fitting Joints For Mold Cooling -Integrated Plugs・Sockets/(Heat-Resistant 120degree Series) /Straight Joints-

  MISUMI

  [Features]
  - Tubes can be attached and detached with one touch.
  [Notes]
  ・M-120KC and M-120KOC are integrated products. Please note that it cannot be removed.
  - Please use at a water temperature of 120℃ or less.
  - Please use by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (1MPa).
  C pack product
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	MYR 19.75-
  Days to Ship:	1 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Quick-Fitting Joints For Mold Cooling -Separate Plugs・Sockets/ (Heat-Resistant 99degree Series) /Sets-

  MISUMI

  [Features]
  - The plug (joint part), socket (thread part) and tube can be attached and detached with one touch.
  ・When the plug is removed, no socket protrusions remain in the mold.
  ・Heating medium, water (clean water), and air can be used as fluids.
  - The threaded part of the socket is heat-resistant sealed, so there is no need for sealing tape or other sealing material.
  (The sealing effect only takes 2-3 times, so please use sealing tape, etc. after that.)
  
  [Notes]
  ・Please use at a water temperature of 99°C or below.
  ・Please use by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (0.9MPa).

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	MYR 57.58-
  Days to Ship:	4 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Quick-Fitting Joints For Mold Cooling -Separate Plugs・Sockets/(Heat-Resistant 99degree Series) /Plugs-

  MISUMI

  [Features]
  - The plug (joint part), socket (thread part) and tube can be attached and detached with one touch.
  - When the plug is removed, no socket protrusions remain on the mold.
  - Heat medium, water (clean water), and air can be used as fluids.
  - The threaded part of the socket is heat-resistant sealed, so there is no need for sealing tape or other sealing material.
  (The sealing effect only takes 2-3 times, so please use sealing tape, etc. after that.)
  
  [Notes]
  - Please use at a water temperature of 99°C or below.
  - Please use the product by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (0.9MPa).

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	MYR 42.36-
  Days to Ship:	4 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Quick-Fitting Joints For Mold Cooling -Separate Plugs・Sockets/Socket Screw-

  MISUMI

  [Features]
  - The plug (joint part), socket (thread part) and tube can be attached and detached with one touch.
  ・When the plug is removed, no socket protrusions remain in the mold.
  ・Heating medium, water (clean water), and air can be used as fluids.
  - The threaded part of the socket is heat-resistant sealed, so there is no need for sealing tape or other sealing material.
  (The sealing effect only takes 2-3 times, so please use sealing tape, etc. after that.)
  
  [Notes]
  ・Please use at a water temperature of 99°C or below.
  ・Please use by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (0.9MPa).

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	MYR 15.22-
  Days to Ship:	4 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Quick-Fitting Joints For Mold Cooling -Separate Plugs・Sockets/(Heat-Resistant 120degree Series)/Sets-

  MISUMI

  [Features]
  - The plug (joint part), socket (thread part) and tube can be attached and detached with one touch.
  ・When the plug is removed, no socket protrusions remain in the mold.
  ・Heating medium, water (clean water), and air can be used as fluids.
  - The threaded part of the socket is heat-resistant sealed, so there is no need for sealing tape or other sealing material.
  (The sealing effect only takes 2-3 times, so please use sealing tape etc. after that.)
  
  [Notes]
  ・Please use at a water temperature of 120℃ or less.
  ・Please use by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (0.9MPa).

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	MYR 77.38-
  Days to Ship:	4 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Quick-Fitting Joints For Mold Cooling -Separate Plugs・Sockets (Heat-Resistant 120degree Series)/Plugs-

  MISUMI

  [Features]
  - The plug (joint part), socket (thread part) and tube can be attached and detached with one touch.
  - When the plug is removed, no socket protrusions remain on the mold.
  - Heat medium, water (clean water), and air can be used as fluids.
  - The threaded part of the socket is heat-resistant sealed, so there is no need for sealing tape or other sealing material.
  (The sealing effect only takes 2-3 times, so please use sealing tape, etc. after that.)
  
  [Notes]
  - Please use at a water temperature of 120℃ or less.
  - Please use the product by keeping the surge pressure (pressure instantaneously applied due to impact flow, etc.) to below the maximum working pressure (0.9MPa).

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	MYR 62.11-
  Days to Ship:	4 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

Loading...