(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
MISUMI Chamfering / Centering Tools（Application：Chamfering/Horizontal）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
TS coated carbide chamfering end mill, 3-flute / short model
MISUMI
[Features]
·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
·Peripheral flutes enable inclined, contour and helical cutting
·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
·With helix angle on the peripheral flutes
·Can also be used as a deburring tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Standard Price: MYR 358.66- Days to Ship: 4 Day(s) or more -
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
·Ideal for chamfering and V-groove
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: MYR 334.04- Days to Ship: 4 Day(s) or more -
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of Workpieces
- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: MYR 378.94- Days to Ship: 4 Day(s) or more -
TS coated carbide chamfering end mill, 2-flute / 15° spiral
MISUMI
[Features]
·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: MYR 409.34- Days to Ship: 4 Day(s) or more -
TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]
·Ideal for chamfering. Can also be used as a deburring tool
·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Standard Price: MYR 233.53- Days to Ship: 4 Day(s) or more -
TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade
MISUMI
The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.
- Volume Discount
- TS
- SUS
- 2 Flutes
Standard Price: MYR 313.65- Days to Ship: 4 Day(s) or more -
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral
MISUMI
Capable of everything from positioning to chamfering in a single shot
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Standard Price: MYR 314.86- Days to Ship: 4 Day(s) or more -
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute
MISUMI
The sharp helix blade achieves the clean machined surface with less burr
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Standard Price: MYR 309.19- Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
MISUMI
The chamfer angle can be selected from 60, 90 and 120°according to the machining style
- Volume Discount
- TiCN
- 2 Flutes
- S (Short)
Standard Price: MYR 260.35- Days to Ship: 4 Day(s) or more -
High-Speed Steel Chamfering End Mill, 2-Flute / Short
MISUMI
Chamfering end mill with the angle that can be freely selected in 1° increments
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 6 Day(s) or more -
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
MISUMI
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
- Volume Discount
Standard Price: MYR 295.48- Days to Ship: 4 Day(s) or more -
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
- Volume Discount
Standard Price: MYR 362.95- Days to Ship: 4 Day(s) or more -
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
XAL Series Carbide Chamfer End Mill 2-Flute
- Volume Discount
Standard Price: MYR 183.44- Days to Ship: 4 Day(s) or more -
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
- Volume Discount
Standard Price: MYR 264.85- Days to Ship: 4 Day(s) or more -
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
MISUMI
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
- Volume Discount
Standard Price: MYR 250.15- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | TS coated carbide chamfering end mill, 3-flute / short model | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | TS coated carbide chamfering end mill, 2-flute / short model | TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade | Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral | TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type | ||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
| |||||
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide |
| Tool Diameter (D)(mm) | 3 ～ 12 | 3 ～ 16 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 10 ～ 25 | 10 ～ 25 | 3 ～ 12 | 3 ～ 10 | 3 ～ 16 | 3 ～ 12 | 3 ～ 12 |
| Tip angle (θ) | 90 | 60 ～ 120 | 90 | 90 | 60 ～ 120 | 90 | 90 | 90 | 60 ～ 120 | 60 ～ 160 | - | 90 | 60 ～ 120 | 90 | 90 |
| Application | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal |
| work material | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎] |
| Single blade, two blades | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | Available | NA | Available | NA | Available | NA | NA | NA | Available | Available | Available | NA | NA | Available | NA |
| Coating Y/N | Available | Available | Available | Available | Available | Available | NA | NA | Available | Available / NA | Available | Available | Available | Available | Available |
| Coating Type | TS | TS | TS | TS | TS | TS | - | - | - | TiCN | AlCrN | AlCrN | AlCrN | AlCrN | TS |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1～6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2~5
- 2～10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3～14
- 3～15
- 3.1
- 3.15
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.4
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.5
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Manufacturer
-
- MISUMI (15)
- FUJIGEN (45)
- IWATA TOOL (30)
- MAKOTOLOY (18)
- OSG (12)
- EIKOSHA (11)
- DAISHOWASEIKI (7)
- THE_CUT (6)
- TRUSCO NAKAYAMA (5)
- DIJET (3)
- DIXI (3)
- KYOWA SEIKO (3)
- NOGA_JAPAN (3)
- SANKO MFG (3)
- ASAHI TOOLS (2)
- NS TOOL (2)
- OKAZAKI SEIKO (2)
- SANDVIK (2)
- YAMAWA MFG (2)
- 7 LEADERS (1)
- DAIICHITOOL (1)
- FUKUDA (1)
- Nine9 (1)
- SPEED TIGER (1)
- UNION TOOL (1)
- ILIX (0)
- RYOCO SEIKI (0)
- OKABE (0)
- SKC (0)
- GUHRING (0)
- ESCO (0)
- NIKKENKOSAKU (0)
- STAR-M (0)
- RUKO (0)
- ATI (0)
- MAPAL (0)
- ALPEN (0)
- ATOM (0)
- TAIYO-TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Chamfering / Centering Tools
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy