(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
LOBTEX Diamond Cutters（Wheel Type：Segment Type）
| Days to Ship |
|
|---|
-
LOBTEX
[Features]
· Cutting, chamfering, and surface finishing of PVC pipes.
· For cutting asbestos dual-layer pipe, cross-linked polyethylene pipe, void pipe, cast iron pipe, drainage mass adjuster kitchen panels.
· Superb sharpness with small to large bore pipes, leaving no flashes or burrs.Standard Price: MYR 292.07- Days to Ship: 9 Day(s) -
Diamond Wheel New Laser (Dry) Long Life
LOBTEX
[Features]
·For cutting hard concrete, secondary concrete products, stone, ALC, mortar, bricks, etc.
·Thorough pursuit of "sharpness, long life and safety"! Achieves the best performance.
·Ideal for difficult-to-cut materials such as hard concrete, reinforced concrete, and stone. (Of course, mortar blocks are also OK)
·"Hardened high-strength substrate" + "laser welding" make harsh work safer.
·The 255-355 uses a hardened laminated substrate to cut sensory noise by 70%.
·Friendly to workers and the environment, ideal for nighttime construction and residential areas.Standard Price: MYR 319.35- Days to Ship: 8 Day(s) or more -
Diamond Wheel U Cutter (Dry Type) / U Cutter Light (Dry Type)
LOBTEX
[Features]
· Ideal for repairing cracks in concrete and mortar.
· Since the grinding cross section is an ideal U shape, caulking materials easily fill grooves, and large adhesive surfaces ensure secure renovation work involving repairing of cracks that occur on concrete or mortar of wall surfaces and roof tops, etc., or for implementing joints.
· Every nook of the most complicated cracks in walls can be cut as needed without damaging other areas.
· The UK is a cost performance-focused type.Standard Price: MYR 929.06- Days to Ship: 9 Day(s) -
Diamond Wheel V Cutter (Dry Type) / V Cutter Light (Dry Type)
LOBTEX
[Features]
· Ideal for repairing cracks in concrete and mortar.
· Because the tip is tapered in a V shape, it is easy to cut into cracks, and even with complicated cracks it is possible to easily cut every corner of the wall without extra damage, so remodeling work can be drastically shortened.
· The VK is a cost performance-focused type.Standard Price: MYR 828.08- Days to Ship: 9 Day(s) or more -
Diamond Wheel Wave Laser WLX Series (Dry Type / Wet Type)
LOBTEX
[Features]
· For cutting of asphalt, concrete, and highly reinforced concrete.
· For both dry asphalt and concrete. With an engine cutter. (With electric cutter, can be used for dry asphalt but not for concrete.)
· Also compatible with wet concrete cutters.
· Long operation life, even for asphalt blocks, bricks and other materials prone to wear.
· Focus on cutting edge and product life during highly reinforced concrete cutting.
· More functionality in extreme work environments over conventional products.
· Hardened substrate + laser welding minimizes substrate distortion from heat and prevents dislodged chips to ensure smooth cutting work.Standard Price: MYR 2,328.05- Days to Ship: 35 Day(s) -
Diamond Wheel Segment Type (Dry Type)
LOBTEX
[Features]
· Ideal for repairing cracks in concrete and mortar.
· It can be used for a wide range of repair work such as chipping mortar and concrete, joint cutting, and grooving in wiring.
· Various diamond layer thicknesses between 3.0 and 10.0 m are prepared. Use the one that matches groove thickness.Standard Price: MYR 704.58- Days to Ship: 35 Day(s) -
Diamond Wheel Gritting (Dry Type)
LOBTEX
A diamond cutter that protects the substrate from wear with a protective tip.
[Features]
·Newly developed bond with the best sharpness.
·Long tool life with 10 mm tip height.
·Laminated substrates provide high rigidity and excellent straightness.
[Applications]
·Ideal for cutting hard concrete, secondary concrete products, hard porcelain tiles, and bricks.
·Ideal for cutting stone (granite), blocks, slates, roof tiles, etc.Standard Price: MYR 257.15- Days to Ship: 9 Day(s) or more -
Diamond Wheel Laser (Dry Type)
LOBTEX
[Features]
· For cutting concrete, secondary concrete products, block, slate, ALC, stone, etc.
· Since this product maintains its strength even at high temperatures, it allows for safe work by reducing the amount of chipping that flies off during the extreme heat produced by difficult-to-cut machining.
· As it bonds instantaneously, it causes little thermal effects on the tip and substrates. It fully utilizes the sharpness of diamond abrasive grains and shows outstanding sharpnessStandard Price: MYR 488.81- Days to Ship: 8 Day(s) or more -
Diamond Wheel Laser Corner Cutter (Dry Type)
LOBTEX
[Features]
· For corner cutting and cutting concrete, blocks, etc.
· The offset shape prevents the flange of power tools from making contact, enabling the corner between the wall of concrete blocks and floor surface to be cut, achieving a quick and beautiful finish.Standard Price: MYR 488.81- Days to Ship: 9 Day(s) -
Diamond Wheel Laser Blade (Dry Type)
LOBTEX
[Features]
· Value type with an emphasis on economy.
· Laser welding.
· For hand type engine cutters.
· For cutting and disassembling concrete, secondary concrete products, block, slate, ALC, stone, etc.
· The tips have been safely bonded by laser welding.
· Outstanding cutting quality tooStandard Price: MYR 821.31- Days to Ship: 18 Day(s) or more -
Diamond Wheel Sword TRX (Dry Type)
LOBTEX
[Features]
· For cutting concrete products, blocks, slate, mortar, bricks, roof tiles, tiles, etc.
· Increased cutting speed.
· Light sharpness and excellent cost performance.Standard Price: MYR 289.33- Days to Ship: 9 Day(s) or more -
Diamond Wheel Kittaro (Dry Type)
LOBTEX
Pricing and performance are a cut above. New series of diamond cutters.
[Features]
· This price for the LOBSTER brand.
· Good cost performance with excellent cutting quality.
[Applications]
· Optimal for cutting all types of concrete products, blocks, slate, mortar, bricks, roof tiles, tiles, etc.Standard Price: MYR 115.18- Days to Ship: 9 Day(s) -
Diamond Wheel Cutting King WA/SA (Dry Type)
LOBTEX
A diamond cutter with convincing "cost performance" and substantial "variations".
[Features]
·WA (wave type) gives a more beautiful finish.
·SA (segment type) gives priority to sharpness and speed.
[Applications]
·Ideal for cutting general concrete products, blocks, slates, mortar, bricks, roof tiles, tiles, etc.Standard Price: MYR 163.28- Days to Ship: 9 Day(s) -
Diamond Blade for Public Works (Wet Type)
LOBTEX
[Features]
·Diamond civil engineering blades are high-quality blades that are suitable for wet use by attaching to concrete cutters, etc., and can be widely used for cutting asphalt, concrete roads, blocks, bricks, and other building structures.Standard Price: MYR 1,151.68- Days to Ship: 8 Day(s) or more -
Diamond Blade for Public Works (Wet Type)
LOBTEX
Value type with an emphasis on economy. For cutting of asphalt/concrete road surfaces, blocks, bricks, etc. Concrete sharpness is emphasized.
Standard Price: MYR 761.10- Days to Ship: 10 Day(s) -
Diamond Wheel with Electrodeposition (for Ceramic Siding Only)
LOBTEX
[Features]
· Unique electrodeposition method achieves gapless electrodeposition of diamond particles for a smooth cut.
· An extremely thin type with little cutting resistance and greatly improved operability.
· Further reduces dust and improves the working environment.
· Multi-segment type with excellent heat dissipation to enable continuous cutting.
· For dedicated ceramics use, but can be used to cut the following materials.
· Hard and brittle materials such as marble and slate, and resin materials such as FRP, CFRP, polyester resin, phenol resin, melamine resin, epoxy resin and hard PVCStandard Price: MYR 370.28- Days to Ship: 8 Day(s) or more -
Welding Diamond Wheel (Dry Type)
LOBTEX
[Features]
· For cutting cast iron tubes, casting, resin materials, rubber, tires, etc.
· 105-305 protect the substrate near protection chip, improve straightness, and result in a beautifully finished cut.
· The 355 separates base plates for increased rigidity and helps prevent run-out/deflection during cutting.
· Resinoid grindstone achieves a "longer life with less dust, smell, and sparks". A "work-friendly product" providing effortless replacement.
· When it comes to cutting of cast metals, ductile cast iron pipes, or powder-coated ductile cast iron pipes, sharpness and life are significantly improved compared to electrodeposition products.Standard Price: MYR 365.74- Days to Ship: 8 Day(s) or more -
Diamond Cutter Wheel (Dry Type) Single Cup
LOBTEX
Diamond cup wheel has a high density of diamond abrasive grains and demonstrates excellent workability during chamfering, such as grinding concrete blocks, bricks, tiles, stones, and refractory furnace materials for various construction work.
Standard Price: MYR 455.36- Days to Ship: 9 Day(s) or more -
Diamond Cutter Wheel (Dry Type) Double Cup
LOBTEX
Diamond cup wheel has a high density of diamond abrasive grains and demonstrates excellent workability during chamfering, such as grinding concrete blocks, bricks, tiles, stones, and refractory furnace materials for various construction work.
[Features]
· High class product having excellent balance of sharpness and life.
· For stone, concrete, block and refractory brickStandard Price: MYR 530.05- Days to Ship: 9 Day(s) -
Diamond Wheel Laser SL (Dry Type)
LOBTEX
[Features]
· Because high strength is maintained even at high temperatures, work can be performed safely with minimal chip scatter.
· Demonstrates excellent cutting quality with instant bonding that fully retains the diamond granule cutting quality.
[Applications]
· For cutting concrete, secondary concrete products (e.g., U-shaped grooves), block, slate, ALC, stone, etc.Standard Price: MYR 1,997.02 Days to Ship: 10 Day(s) -
Diamond Wheel New Laser (Dry Type)
LOBTEX
[Features]
· Further increases the performance of conventional products and pursues a high cost performance.
· SL255A and above use a noise reduction baseplate.
· Further pursues cutting quality + long life and safety.
[Applications]
· For cutting hard concrete and secondary concrete products, stone materials, ALC, mortar, bricks, etc.Standard Price: MYR 2,187.93 Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Wheel Type |
| Specifications |
| Application |
| Outer Diameter(mm) |
| Blade thickness(mm) |
| Hole Diameter(mm) |
| Tip Height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX |
| Product Series | Diamond Wheel U Cutter (Dry Type) / U Cutter Light (Dry Type) | Diamond Wheel V Cutter (Dry Type) / V Cutter Light (Dry Type) | Diamond Wheel with Electrodeposition (for Ceramic Siding Only) | ||||||||||||||||||
| Days to Ship | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 35 Day(s) | 35 Day(s) | 9 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 18 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 10 Day(s) | 9 Day(s) |
| Product Type | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter |
| Wheel Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type |
| Specifications | Dry Type | Dry Type | Dry Type | Dry Type | Dry and Dry-Wet Type | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type | Wet type | Wet type | - | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type |
| Application | - | For concrete, mortar / Stone Material | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Stone Material | For concrete, mortar | For concrete, mortar | For concrete, mortar / Tile | For concrete, mortar | For concrete, mortar / Tile | For concrete, mortar | For concrete, mortar | Stone Material / Resin | Iron / Resin | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Stone Material | For concrete, mortar / Stone Material |
| Outer Diameter(mm) | 105 ～ 125 | 105 ～ 355 | 105 | 108 | 260 ～ 360 | 80 ～ 127 | 105 ～ 125 | 105 ～ 400 | 105 ～ 126 | 255 ～ 355 | 105 ～ 203 | 105 ～ 305 | 105 ～ 205 | 255 ～ 471 | 255 ～ 418 | 80 ～ 180 | 106 ～ 355 | 98 ～ 125 | 98 ～ 125 | 304 | 355 |
| Blade thickness(mm) | 1.7 | 2 ～ 3.2 | 10 | 10 | 2.7 ～ 3 | 3 ～ 10 | 1.8 | 2 ～ 3 | 2.3 | 2.4 ～ 3.2 | 1.8 ～ 2 | - | 1.8 ～ 2.2 | 2.5 ～ 3.2 | 2.8 ～ 3.2 | 0.6 ～ 1 | - | 4.5 | 4.5 | 2.5 | 3.2 |
| Hole Diameter(mm) | 20 ～ 22 | 20 ～ 30.5 | 20 | 20 | 20 ～ 30.5 | 20 ～ 22 | 20 ～ 22 | 20 ～ 30.5 | 20 ～ 22 | 20 ～ 30.5 | 20 ～ 25.4 | 20 ～ 30.5 | 20 ～ 25.4 | 22 ～ 27 | 27 | 20 | 20 ～ 30.5 | 15 ～ 22 | 15 ～ 22 | 25.4 | 30.5 |
| Tip Height(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | 6 ～ 7 | - | - | - | - | - | 7.5 | 7 |
Loading...
Configure
Specification/Dimensions
-
Product Type
- Diamond cutter
- Polyvinyl chloride tube internal surface cutter
-
Wheel Type
- Segment Type
- Wave Type
- Rim Type
-
Specifications
- Dry Type
- Wet type
- Dry and Dry-Wet Type
-
Application
- Iron
- Non-ferrous
- For concrete, mortar
- Stone Material
- Tile
- Resin
-
Outer Diameter(mm)
-
Blade thickness(mm)
-
Hole Diameter(mm)
-
Tip Height(mm)
Narrow search by specifying Manufacturer
-
- LOBTEX (21)
- ASAHI_DIAMOND (4)
- IWOOD (2)
- RIKENDIAMOND (2)
- SAINTGOBAIN (2)
- YANASE (2)
- EARTH MAN (1)
- GOEI (1)
- TSUBOMAN (1)
- TOP (1)
- TRUSCO NAKAYAMA (1)
- DREMEL (0)
- MIYANAGA (0)
- MOTOYUKI (0)
- WAKITA (0)
- NORITAKE (0)
- SANKYODIAMOND (0)
CAD
-
- 2D
- 3D
Related Categories to Diamond Cutters
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy