KTC(KYOTO TOOL) Vehicle Maintenance Tools（Product Type：Engine Related）

• 

  9.5 Sq. Triple Square Bit Socket

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated bit used for triple square bolts with socket heads used in European vehicles. These bolts are used commonly in the drive shaft flanges and undercarriage of Volkswagen and Audi vehicles, etc.
  · The end bit is replaceable.

  Standard Price:	MYR 176.53-
  Days to Ship:	8 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Plug Wrench:

  KTC(KYOTO TOOL)

  [Features]
  · Uses a new design instantly recognizable as a plug wrench.
  · Has a magnet that prevents the spark plug from falling off.
  [Applications]
  · Wrench for spark plug replacement

  Standard Price:	MYR 96.76-
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Pilot Bearing Bushing Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing pilot bearing bushing on flywheels.
  [Features]
  · Compact, lightweight and easy to use. Improves workability.
  · Claws engage well and can be used for maintenance on vehicles.
  · Suitable for a wide variety of models.

  Standard Price:	MYR 2,228.28
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Oil filter wrench

  KTC(KYOTO TOOL)

  [Features]
  · Striving for usability, this design has reduced the total height and provides a generous overlap allowance that keeps it from slipping easily.
  · Due to the effect of the uneven outer periphery, it is less slippery when installing an oil filter by hand.
  · Made of die-cast aluminum, lighter at about 60% of the weight of an equivalent steel product.
  · Allows combined use of a ratchet and a double box end wrench, depending on the work environment.
  [Applications]
  · Tool for Replacement of Oil Filters

  Standard Price:	MYR 99.36-
  Days to Ship:	8 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Chain type cartridge wrench

  KTC(KYOTO TOOL)

  [Features]
  · Used for removing cartridge type oil filters.
  · With its own oscillating head mechanism, rotational load acts on the entire chain, preventing concentrated loads that cause distortion of the cartridge.
  [Applications]
  · Tool for Replacement of Oil Filters and Fuel Filters

  Standard Price:	MYR 409.65
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Chain type oil filter wrench

  KTC(KYOTO TOOL)

  [Features]
  · Used for removing cartridge type oil filters.
  · A 12.7 sq. spinner handle or offset wrench with 24 mm width across flats can be used depending on the operating environment.
  · The chain does not easily come off during work, enabling reliable loosening work.
  [Applications]
  · Tool for Replacement of Oil Filters

  Standard Price:	MYR 465.56
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Oil Filter Wrench

  KTC(KYOTO TOOL)

  [Features]
  · Easily wrung out, non-slip adjustable type.
  · The shape allows working freely even in narrow places.
  [Applications]
  · For oil filter removal

  Standard Price:	MYR 310.31-
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Hose Clip Tool

  KTC(KYOTO TOOL)

  [Features]
  · Because it is a screw type and stays secure when the hose clamp is loosened, it can be used accurately even in tight working spaces.
  · The jaw has a waffle-pattern gripping surface so that the hose clip does not slip and come off accidentally.
  [Applications]
  · For removing spring-type hose clip pliers

  Standard Price:	MYR 293.26
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Hose Plucker【1-3 Pieces Per Package】

  KTC(KYOTO TOOL)

  [Features]
  · 3 types are available and can be used even for a narrow working space.
  [Applications]
  · For removing adhesive from hoses used for various machinery.
  · For pulling out hoses and peeling adhesion

  Standard Price:	MYR 99.99-
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Pinch-Off Pliers

  KTC(KYOTO TOOL)

  [Features]
  · Uses a stepless automatic locking mechanism to lock the pliers just by holding the object, which achieves quick operation.
  · Can be released simply by opening the grip.
  · Tool for blocking hoses.

  Standard Price:	MYR 282.36
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Handy Bar Mini

  KTC(KYOTO TOOL)

  [Features]
  · Convenient for prying, spreading and removing.
  · Shaft has an I-shaped cross section which makes it easy to use.
  · The grip is made of rubber and will not split.
  · The shaft runs through the grip to allow hitting.
  [Applications]
  · Maintenance Auxiliary Tool.

  Standard Price:	MYR 390.03-
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Flexible Suction Nozzle For Oil Drainer (For GOD24B/GOD80B/GOD80E)

  KTC(KYOTO TOOL)

  [Features]
  · GOD-6X1500F has a length convenient for use in minivans, etc.

  Standard Price:	MYR 207.53-
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Metal Suction Nozzle For Oil Drainer (For GOD24B/GOD80B/GOD80E)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for GOD24B, GOD80B, GOD90B and GOD80E.

  Standard Price:	MYR 199.16-
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Suction Adapter For Oil Drainer (For GOD24B/GOD80B/GOD80E)

  KTC(KYOTO TOOL)

  [Features]
  · The adapter is used to attach the oil drainer directly to the oil level gauge without a nozzle.
  GOD-ADA: For Volkswagen vehicles
  GOD-ADB: For BMW vehicles

  Standard Price:	MYR 144.86-
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Cone Plug L Size Adapter

  KTC(KYOTO TOOL)

  [Features]
  · This is an optional product for coolant chargers (AE401) compatible with radiator caps having an inner diameter of 34 to 40 mm.
  · Applicable model (representative manufacturer): Volkswagen, Audi, Volvo (passenger cars), Rover (200 to 600, Freelander), Fiat, etc.

  Standard Price:	MYR 224.11
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Spare Tank Assy (Tank + Cap)

  KTC(KYOTO TOOL)

  [Features]
  · Spare tank for coolant charger (AE401).
  · Size: W420 mm (base length approx. 360) × D220 mm × H370 mm
  · Weight: 1 kg

  Standard Price:	MYR 393.93
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Dedicated Socket

  KTC(KYOTO TOOL)

  [Features]
  · Dedicated sockets are provided in frequently used 14, 17 and 19 mm sizes.
  · Through-type sockets are thin and designed to accommodate bolt recesses.
  · Regular sockets can be used by attaching the 9.5 sq. drive onto the offset section of the belt tensioner wrench.

  Standard Price:	MYR 79.52-
  Days to Ship:	8 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Belt Tensioner Wrench (Offset Type)

  KTC(KYOTO TOOL)

  [Applications]
  · Toyota 2.4 L (2AZ) equipped vehicle Vellfire, Alphard [May 2008 and later], Mark X ZiO, etc.
  [Features]
  · When used with the AE107-500, work can be performed in the optimum work posture even in confined work spaces.
  · By designing the main body in an offset shape, surrounding obstacles can be avoided easily.
  · Dedicated design supports models that can only be accessed from under the engine room.

  Standard Price:	MYR 253.48
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  9.5 Sq. Drive

  KTC(KYOTO TOOL)

  [Features]
  · Dedicated sockets are provided in frequently used 14, 17 and 19 mm sizes.
  · Through-type sockets are thin and designed to accommodate bolt recesses.
  · Regular sockets can be used by attaching the 9.5 sq. drive onto the offset section of the belt tensioner wrench.

  Standard Price:	MYR 79.76
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Belt Tensioner Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Use this dedicated tool to loosen the tensioner when replacing the belt in vehicles with auto tensioner type drive belts (single belt type).
  [Scope]
  · Effective for Japanese mini cars, ordinary passenger cars and especially for minivans (FF vehicles).
  [Features]
  · Thin, dedicated long swing ratchet is suited for environments working on vehicles with auto tensioners. Even in a confined engine room, a large swing motion is possible without interfering with pulleys and other obstacles.
  · Non-slip plastic grip is easy to grip and apply force, enabling easy work with damper type auto tensioners often used in FF vehicles with a high load.

  Standard Price:	MYR 632.28
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Belt Hook Tool

  KTC(KYOTO TOOL)

  Use with belt tensioner wrench (ATE175) for easy replacement of auto tensioner type drive belt (single belt type).
  
  [Applications]
  · Replacement of engine belts, and the lifting and guiding of wiring and piping.
  [Scope]
  · Mainly V-belt and V-ribbed belt (7 ribs or more) in Japanese and imported passenger cars.
  [Features]
  · Hook with a round shaft removes the belt smoothly and prevents damage to the new belt.
  · Quickly replace single serpentine long belts, which are wide and difficult to change.
  · Long 660 mm length is effective for vehicles with a deep engine room, such as minivans.

  Standard Price:	MYR 210.66
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Belt Tensioner Wrench Set

  KTC(KYOTO TOOL)

  [Applications]
  · Use this dedicated tool to loosen the tensioner when replacing the belt in vehicles with auto tensioner type drive belts (single belt type).
  [Scope]
  · Effective for Japanese mini cars, ordinary passenger cars and especially for minivans (FF vehicles).
  [Features]
  · Thin, dedicated long swing ratchet is suited for environments working on vehicles with auto tensioners. Even in a confined engine room, a large swing motion is possible without interfering with pulleys and other obstacles.
  · Non-slip plastic grip is easy to grip and apply force, enabling easy work with damper type auto tensioners often used in FF vehicles with a high load.

  Standard Price:	MYR 887.66
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Crank Pulley Holder

  KTC(KYOTO TOOL)

  This is a crank pulley stopper compatible with various shapes.
  
  [Applications]
  · This tool is used mainly to remove or mount the crank pulley for vehicles with vertically-mounted engines (FR vehicles) (when replacing the timing belt, replacing the oil seal, or overhauling the engine, etc.).
  The Crank Pulley Double Power Wrench (AE-10) can also be used when loosening the crank pulley lock bolt.
  * The Crank Pulley Puller Manual Type (AE702) or Hydraulic Type (CPU13) is required to remove the crank pulley.
  [Scope]
  · Suitable mainly for vertically-mounted engines (FR vehicles), especially Toyota JZ series and 1G Series, Nissan RB Series, VG Series and VQ Series (diesel engines are excluded).
  · This tool is dedicated for V-ribbed belts.
  · Pulley outer diameter: ø90 to 180
  / With service tap: Compatible with M6 and M8
  [Features]
  The tool is easy to mount.
  · Just mount the rotary claw onto the crank pulley grooves and screw in the grip. (The center slider can be positioned simultaneously while mounting onto the crank pulley.)
  The thin design is just 45 mm thick.
  · There is no need to remove the radiator or condenser during work. (Excluding some models)

  Standard Price:	MYR 2,043.46
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Crank Pulley Holder Pin Set

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Crank Pulley Holder AE701.

  Standard Price:	MYR 179.91
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Crank Pulley Holder Set Bolt Set

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Crank Pulley Holder AE701.

  Standard Price:	MYR 181.49
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Crank Pulley Puller (Manual Type)

  KTC(KYOTO TOOL)

  Manual Type Crank Pulley Puller
  
  [Applications]
  · This tool is used to remove crank pulleys.
  * The Crank Pulley Holder (AE701) or Clamp Pulley Holding Plate (CPH1) is required when removing the crank pulley.
  * This tool cannot be used with the Claw Type Crank Pulley Puller (AE11).
  [Features]
  · Lightweight and compact, suitable for working in confined places.
  · Stroke is adjustable with 2 types of adapters.
  [Example of work]
  When using Crank Pulley Holder (AE701)
  (1) Set Crank Pulley Holder (AE701) in the crank pulley and remove the locking bolt.
  (2) Select a combination for adapters A and B and attach to the crank pulley holder.
  Select a combination for adapters A and B according to the crank pulley drawing stroke.
  (3) Stop the pulley with the spinner handle and turn the crank pulley puller screw with a 22 mm offset or drive tool to remove the crank pulley.

  Standard Price:	MYR 582.16
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Crank Pulley Puller Adapter A

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Crank Pulley Puller AE702.

  Standard Price:	MYR 87.07
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Crank Pulley Puller Adapter B

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Crank Pulley Puller AE702.

  Standard Price:	MYR 112.38
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Crank Pulley Hold Wrench For Honda AE703

  KTC(KYOTO TOOL)

  [Applications]
  · Crank pulley stopper for Honda vehicles.
  * This tool cannot pull out crank pulleys.
  Use AE701 and AE702 (or CPU13) to remove the crank pulley.
  [Scope]
  · Crank pulley with 50 mm width across flats used for Honda vehicles.
  * Incompatible with some NSX models having 45 mm width across flats.
  * Incompatible with older Life models having 30 mm or smaller work space.

  Standard Price:	MYR 509.19
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Crank Pulley Hold Wrench For Honda AE703A

  KTC(KYOTO TOOL)

  [Applications]
  · Crank pulley stopper for Honda vehicles.
  * This tool cannot pull out crank pulleys.
  Use AE701 and AE702 (or CPU13) to remove the crank pulley.
  [Scope]
  · 2003 or older Honda Life (model JB5 to JB8).
  * Incompatible with older Life models having 30 mm or smaller work space.

  Standard Price:	MYR 509.19
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Crank Pulley Puller Output Cylinder Adapter

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Crank Pulley Puller CPU13.

  Standard Price:	MYR 221.65
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Crank Pulley Tool Set A

  KTC(KYOTO TOOL)

  Low-cost standard type with diverse applications.
  
  [Applications]
  · Loosening and tightening crank pulley lock bolts.
  · Manually removing crank pulleys.
  [Scope]
  · Suitable set for pulleys with or without service taps.

  Standard Price:	MYR 3,218.03
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Crank Pulley Hold Plate Spare Set

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Crank Pulley Tool CPHU2.

  Standard Price:	MYR 388.18
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Cam Pulley Hold Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Tool dedicated for stopping cam pulleys.
  [Scope]
  · Pinhole type cam pulley
  · Star-shaped cam pulley
  [Usage]
  · Select 1 of 2 types of pin (straight or flanged) according to the cam pulley shape and attach to arm.
  · Contact the pin against the cam pulley, fix rotation and loosen or tighten bolt with wrench, etc.
  [Features]
  · Arm opens and closes with a spring mechanism, and stability is improved by applying constant tension in the opening direction.
  · 2 types of stopper pins support 2 types of cam pulleys.
  · The knurled grip is easy to grip and apply force.

  Standard Price:	MYR 434.23
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Cam Pulley Hold Wrench / Straight Pin

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Cam Pulley Hold Wrench (AE81).

  Standard Price:	MYR 143.56
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Cam Pulley Hold Wrench Flanged Pin

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Cam Pulley Hold Wrench (AE81).

  Standard Price:	MYR 143.56
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  12.7 Sq. Head Bolt Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.

  Standard Price:	MYR 125.58-
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  12.7 sq. Head Bolt Socket Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.
  [Features]
  · Has a hexagon rod made of special spring steel to ensure outstanding durability.
  · Compatible with 8 mm and 10 mm cap screw bolts (hex socket bolts).

  Standard Price:	MYR 182.65-
  Days to Ship:	8 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  12.7 Sq. Head Bolt Socket Wrench Set HB352

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.
  [Features]
  · Has a hexagon rod made of special spring steel to ensure outstanding durability.
  · Compatible with 8 mm and 10 mm cap screw bolts (hex socket bolts).

  Standard Price:	MYR 303.10
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  12.7 Sq. Head Bolt Wrench Set

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening the head bolt when removing or mounting the engine cylinder head.

  Standard Price:	MYR 371.91
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  19.0 Sq. Head Bolt Flywheel Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated wrench used when removing or installing the engine cylinder head bolt or flywheel bolt.
  [Features]
  · 4 sizes that can be used on head bolts and flywheel bolts for Isuzu and Mitsubishi Fuso vehicles.

  Standard Price:	MYR 286.92-
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  19.0 Sq. Head Bolt Flywheel Wrench Set

  KTC(KYOTO TOOL)

  [Applications]
  ·Dedicated wrench used to attach and detach engine cylinder head bolts and flywheel bolts

  Standard Price:	MYR 977.34
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Engine Mechanical Hanger Compatible With Impact Absorbing Body

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for holding automotive engine.
  [Scope]
  · Compatible with engines for FF lightweight to ordinary vehicles.
  　(Excluding vehicles that does not have fender, strut tower or front support installation bolt, trucks and minivans)
  · Maximum usage load: 2,450 N (250 kgf) or less
  [Features]
  · Compatible with impact absorbing bodies commonly adopted in recent vehicles.
  · This tool can be set stably and parallel to the ground even if the fender is inclined or tilted downward.
  · Compatible with models having short fender ribs that are not supported with conventional parts, or models in which tools cannot be set between fenders.
  · Vehicle can be moved or lifted up and down while the engine is held.
  · Because the bridge can be set in an inclined state, the hanger can be used with the bridge shifted from above the belt when replacing the belt, etc.
  · Utilizes backward type winch. Drive section can be switched between left and right and moved to the desired position.
  · Winch can be operated remotely with a chain wheel even while the vehicle is lifted up.

  Standard Price:	MYR 5,763.53
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  Optional Kit For Engine Mechanical Hanger (Kit Compatible With Older Models)

  KTC(KYOTO TOOL)

  · Conventional engine mechanical hanger (ATH10)

  Standard Price:	MYR 3,003.46
  Days to Ship:	8 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  12.7 Sq. Drain Plug Socket

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for tightening and loosening mission and differential drain (filler) plugs used in Nissan and Subaru vehicles.
  [Scope]
  · Mainly for Nissan FF manual transmission vehicles (AC301-10)
  · Mainly for Nissan manual transmission, rear differential, Subaru 4WD vehicle rear differential (AC301-13)
  · Mainly for older Nissan FR manual transmission vehicles (AC301-17)
  [Features]
  · Adopted 12.7 sq. to support drain plugs tightened with a large torque.
  · Main body has a hexagon shape that can be used with a 24 mm offset wrench, etc.

  Standard Price:	MYR 102.41-
  Days to Ship:	9 Day(s)

  "Same Day Ship Out" is available for item with 1 day

Loading...