(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
KYOCERA Grooving / Cutting Off Holders（Selfishly：No-hand）
| Days to Ship |
|
|---|
-
Multi-Functional / Grooving (Cutting-Off) Chip GMG Type
KYOCERA
Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.
Standard Price: MYR 94.44- Days to Ship: 4 Day(s) or more -
Lathe Turning (Cutter) Bit GDM Model
KYOCERA
Conventional insert mounting to new holders is not recommended.
Standard Price: MYR 56.71- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 85.67 Days to Ship: 6 Day(s) or more -
KYOCERA
P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.
Standard Price: MYR 670.60- Days to Ship: 10 Day(s) -
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.
Standard Price: MYR 72.49- Days to Ship: 6 Day(s) or more -
Lathe Turning (Cutter) Bit GDG Model
KYOCERA
Conventional insert mounting to new holders is not recommended.
Standard Price: MYR 83.57- Days to Ship: 6 Day(s) or more -
Lathe Turning (Cutter) Bit GDMS Model
KYOCERA
Conventional insert mounting to new holders is not recommended.
Standard Price: MYR 46.16- Days to Ship: 10 Day(s) or more -
Multi-Functional /Grooving (Cutting-Off) Chip GMGA Type
KYOCERA
Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.
Standard Price: MYR 208.97- Days to Ship: 10 Day(s) or more -
Multi-Functional / Grooving (Cutting-Off) Chip GMM Type
KYOCERA
Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.
Standard Price: MYR 70.29- Days to Ship: 4 Day(s) or more -
Lathe Turning/Cutting (Multi-Function) Bit GMM Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.
Standard Price: MYR 57.75- Days to Ship: 6 Day(s) or more -
Lathe Turning/Cutting (Multi-Function) Bit GMN Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.
Standard Price: MYR 50.55- Days to Ship: 6 Day(s) or more -
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304313-546.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip
KYOCERA
[Features]Carbide materials and Cermet materials are used, and some are coated with CVD and PVD coatings.
Standard Price: MYR 68.10- Days to Ship: 6 Day(s) or more -
Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve
KYOCERA
[Specifications]·no cutting direction; lubrication hole (oil hole): yes; compatible sleeve: It can be used in combination with a holder to change the tool runout.
Standard Price: MYR 713.22- Days to Ship: 6 Day(s) or more -
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304537-560.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip
KYOCERA
Clamp-on type large inner diameter deep grooving holder.
Standard Price: MYR 68.10- Days to Ship: 6 Day(s) or more -
KGDF Type End Face Grooving GDFM/GDFMS Types
KYOCERA
Use a DM breaker for deep grooves when cutting chip processing is not stable during grooving with a general purpose GM breaker.
Standard Price: MYR 44.91- Days to Ship: 6 Day(s) or more -
Multi-Functional / End Face Grooving Holder Compatible Tip
KYOCERA
Takinor multi-functional / end face grooving holder.
Standard Price: MYR 58.20- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 82.62- Days to Ship: 6 Day(s) or more -
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.
Standard Price: MYR 91.92- Days to Ship: 6 Day(s) or more -
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.
Standard Price: MYR 53.68- Days to Ship: 6 Day(s) or more -
KYOCERA
A breaker developed for cutting off, where the sharpness of an automatic lathe or similar is required. Drastically reduces remaining center part.
Standard Price: MYR 74.68- Days to Ship: 6 Day(s) or more
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304313-546.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304537-560.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Application |
| Groove Width(mm) |
| Maximum Groove Depth(mm) |
| Selfishly |
| Maximum Machining Diameter(mm) |
| Number of corners for tip use |
| Shank height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type) | Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip | Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip | |||||||||||||||||
| Days to Ship | 4 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Groove Width(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Groove Depth(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Selfishly | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand |
| Maximum Machining Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of corners for tip use | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank height(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304313-546.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304537-560.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Application
- Outer Diameter Grooving
- Inner Diameter Grooving
- Edge surface grooving
- Cutting off
- Horizontal feeding
- Profiling
-
Groove Width(mm)
- 0.30 to 3.00
- 0.33～2.8
- 0.5-3.18
- 0.50 to 2.00
- 0.5–2.0
- 0.50～2.00
- 0.5～2.80
- 0.5 to 3.18
- 0.7-2.0
- 1～1.45
- 1.00 to 2.00
- 1.00～2.00
- 1.00 to 2.49
- 1.25～4.80
- 1.45 to 3.00
- 1.5
- 1.50 to 2.00
- 1.50～2.00
- 1.5～2.3
- 1.5～4.4
- 1.75 to 2.00
- 2
- 2.0 to 2.5
- 2.00 to 3.49
- 2.5
- 2.50 to 3.00
- 2.5 to 4.8
- 2.65
- 3
- 3.00 to 3.50
- 3.17
- 3.50 to 5.50
- 4
- 4.0–5.0
- 4.00 to 5.90
- 4.6～6.0
- 4.75
- 5
- 5(6)
- 6
- 6.00 to 7.90
- 6.35
- 8
- 8.00 to 9.00
- 9
- 10
- 10～3.0
- 11
- 12
- 15
-
Maximum Groove Depth(mm)
-
Selfishly
-
Maximum Machining Diameter(mm)
-
Number of corners for tip use
-
Shank height(mm)
Narrow search by specifying Manufacturer
-
- KYOCERA (20)
- SANDVIK (2)
- KOSHUHA (0)
- SUMITOMO_ELEC_ (0)
- ISCAR (0)
- NGK SPARK PLUG (0)
CAD
-
- 2D
- 3D
Related Categories to Grooving / Cutting Off Holders
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy