(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
KYOCERA Grooving / Cutting Off Holders（Selfishly：Left-hand）
| Days to Ship |
|
|---|
-
Slit Tip KGD Type (for Automatic Plate)
KYOCERA
4.0 mm wide insert can also be mounted on KGDR/L1212JX-3, but this is not recommended due to the lack of holder rigidity.
Standard Price: MYR 623.23- Days to Ship: 6 Day(s) or more -
Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.
Standard Price: MYR 623.23- Days to Ship: 6 Day(s) or more -
Grooved End Face Blade KGDF Type
KYOCERA
[Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 540.02- Days to Ship: 6 Day(s) or more -
KYOCERA
P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.
Standard Price: MYR 1,348.03 Days to Ship: 10 Day(s) -
KGDS-S Type Blade for Grooving/Plunging
KYOCERA
[Specifications]·Machining applications: grooving / parting-off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS
Standard Price: MYR 410.38- Days to Ship: 6 Day(s) or more -
Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)
KYOCERA
If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.
Standard Price: MYR 738.28- Days to Ship: 6 Day(s) or more -
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304289.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type
KYOCERA
[Features]It can be used for shallow grooving on the outer diameter and can be used for GH, GHU and GA inserts.
Standard Price: MYR 747.30- Days to Ship: 10 Day(s) -
Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)
KYOCERA
[Specifications]·Machining applications: grooving; holder angle (°): 90; lubrication hole (oil hole): yes; screw clamp enables good cutting chip discharge
Standard Price: MYR 747.30- Days to Ship: 6 Day(s) or more -
![Small Bore Slotting Holder [for GV Tip]](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304425.jpg?$product_view_b$)
Small Bore Slotting Holder [for GV Tip]
KYOCERA
Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.
Standard Price: MYR 1,009.31- Days to Ship: 6 Day(s) or more -
Inner Diameter Shallow Groove Holder KIGBA Type
KYOCERA
[Specifications]·Machining applications: grooving; holder angle (°): 90; type: integrated
Standard Price: MYR 1,147.79- Days to Ship: 10 Day(s) -
KYOCERA
Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.
Standard Price: MYR 3,210.59 Days to Ship: 10 Day(s) or more -
Micro Groove Cutter (Twin Bar) Mode TWFG (Side Cutting)
KYOCERA
The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.
Standard Price: MYR 169.05- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 76.88- Days to Ship: 3 Day(s) or more -
Slit Tip (For Small Diameters) TKF Type
KYOCERA
[Features]
· Lead angle (front cutting blade angle: θ) indicates the angle when mounted to the holder.Standard Price: MYR 111.14- Days to Ship: 4 Day(s) or more -
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.
Standard Price: MYR 74.79- Days to Ship: 6 Day(s) or more -
Lathe Turning/Cutting Holder KGD Model (Combination)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.
Standard Price: MYR 640.96- Days to Ship: 6 Day(s) or more -
Grooved End Face Holder (for GVF Chip) GFVT Type
KYOCERA
[Features]
· Blade exchange enables this holder to support various groove diameters.Standard Price: MYR 1,226.79- Days to Ship: 10 Day(s) or more -
Blade for Grooved End Face Holder
KYOCERA
This product can be used for various groove diameters by changing blades.
For face grooving holders.Standard Price: MYR 274.31- Days to Ship: 10 Day(s) or more -
Outer Diameter Shallow Groove Holder KGBA Type
KYOCERA
[Features]This is a lever lock type holder that can be used for shallow grooving on outer diameters.
Standard Price: MYR 614.23- Days to Ship: 10 Day(s) or more -
Outer Diameter Shallow Groove Holder KGBAS Type
KYOCERA
A lever-lock type outer diameter shallow grooving holder.
[Shank Material]SteelStandard Price: MYR 666.66- Days to Ship: 6 Day(s) or more -
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_b$)
Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type
KYOCERA
A clamp-on type outer diameter shallow grooving holder.
[Shank Material]SteelStandard Price: MYR 614.23- Days to Ship: 6 Day(s) or more -
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_b$)
Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type
KYOCERA
A clamp-on type outer diameter shallow grooving holder.
[Shank Material]SteelStandard Price: MYR 666.66- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 101.44 Days to Ship: 4 Day(s) or more -
Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.
Standard Price: MYR 880.00- Days to Ship: 10 Day(s) or more -
Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)
KYOCERA
[Specifications]·Machining applications: grooving / parting-off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS
Standard Price: MYR 527.13- Days to Ship: 10 Day(s) -
Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)
KYOCERA
[Specifications]·Machining applications: grooving / parting-off; holder angle (°): 90; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS
Standard Price: MYR 774.66 Days to Ship: 6 Day(s) or more -
Multi-Functional / Grooving (Cutting-Off) Chip FGG Type
KYOCERA
Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.
Standard Price: MYR 117.54- Days to Ship: 6 Day(s) or more -
Lathe Turning/Cutting (Multi-Function) Bit GMM Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.
Standard Price: MYR 73.95- Days to Ship: 10 Day(s) -
Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.
Standard Price: MYR 67.38- Days to Ship: 10 Day(s) or more -
Multi-Functional / Grooving Holder KGM Type (For Automatic Board)
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.
Standard Price: MYR 618.26- Days to Ship: 10 Day(s) -
Multi-Functional / Grooving Holder KGM Type
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.
Standard Price: MYR 747.10- Days to Ship: 6 Day(s) or more -
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type
KYOCERA
A clamp-on type outer diameter deep grooving holder.
For outer diameter deep grooving.
A right angle type.Standard Price: MYR 914.93- Days to Ship: 10 Day(s) -
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type
KYOCERA
A clamp-on type outer diameter deep grooving holder.
For outer diameter deep grooving.Standard Price: MYR 747.30- Days to Ship: 10 Day(s) -
Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 827.39- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 424.95 Days to Ship: 6 Day(s) or more -
Inner Diameter Groove SIGE Type Compatible Chip
KYOCERA
B dimension: Indicates machinable groove depth.
Standard Price: MYR 91.40- Days to Ship: 4 Day(s) or more -
Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)
KYOCERA
Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.
Standard Price: MYR 1,819.98- Days to Ship: 6 Day(s) or more -
Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)
KYOCERA
GIV model tip for small diameter grroving.
Standard Price: MYR 72.19- Days to Ship: 4 Day(s) or more -
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type
KYOCERA
[Specifications]·Machining applications: grooving; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integrated
Standard Price: MYR 1,094.05 Days to Ship: 10 Day(s) -
Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit)
KYOCERA
T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.
Standard Price: MYR 459.48- Days to Ship: 10 Day(s) -
Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)
KYOCERA
· T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.
Standard Price: MYR 1,011.73- Days to Ship: 6 Day(s) or more -
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA
KYOCERA
[Specifications]·Compatible insert shape: non-ISO standard; clamp method: clamp-on (C); clamp method: clamp-on (C)
Standard Price: MYR 1,227.13- Days to Ship: 10 Day(s) -
Standard Price: MYR 121.20- Days to Ship: 4 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS Type
KYOCERA
Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.
Standard Price: MYR 1,160.95- Days to Ship: 6 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS-8 Type
KYOCERA
[Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: clamp-on (C)
Standard Price: MYR 1,160.95- Days to Ship: 10 Day(s) or more
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304289.jpg?$product_view_b$)
![Small Bore Slotting Holder [for GV Tip]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304425.jpg?$product_view_b$)
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_b$)
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_b$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_b$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_b$)
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Application |
| Groove Width(mm) |
| Maximum Groove Depth(mm) |
| Selfishly |
| Maximum Machining Diameter(mm) |
| Number of corners for tip use |
| Shank height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type) | Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type) | Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type | Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole) | Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type | Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type | Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type) | Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type) | Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type) | Multi-Functional / Grooving Holder KGM Type (For Automatic Board) | Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type | Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type | Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining) | Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole) | Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type) | Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type | Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit) | Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit) | Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA | ||||||||||||||||||||||||||
| Days to Ship | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 10 Day(s) | 6 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Edge surface grooving | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Edge surface grooving | - |
| Groove Width(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 5(6) | - |
| Maximum Groove Depth(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5.1(4.6) ～ 8.1(8.1) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Selfishly | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand |
| Maximum Machining Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50（∞） ～ 250（∞） | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 ～ ∞ | - |
| Number of corners for tip use | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank height(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 | - |
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304289.jpg?$product_view_c$)
![Small Bore Slotting Holder [for GV Tip]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304425.jpg?$product_view_c$)
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_c$)
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_c$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_c$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_c$)
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Application
- Outer Diameter Grooving
- Inner Diameter Grooving
- Edge surface grooving
- Cutting off
- Horizontal feeding
- Profiling
-
Groove Width(mm)
- 0.30 to 3.00
- 0.33～2.8
- 0.5-3.18
- 0.50 to 2.00
- 0.5–2.0
- 0.50～2.00
- 0.5～2.80
- 0.5 to 3.18
- 0.7-2.0
- 1～1.45
- 1.00 to 2.00
- 1.00～2.00
- 1.00 to 2.49
- 1.25～4.80
- 1.45 to 3.00
- 1.5
- 1.50 to 2.00
- 1.50～2.00
- 1.5～2.3
- 1.5～4.4
- 1.75 to 2.00
- 2
- 2.0 to 2.5
- 2.00 to 3.49
- 2.5
- 2.50 to 3.00
- 2.5 to 4.8
- 2.65
- 3
- 3.00 to 3.50
- 3.17
- 3.50 to 5.50
- 4
- 4.0–5.0
- 4.00 to 5.90
- 4.6～6.0
- 4.75
- 5
- 5(6)
- 6
- 6.00 to 7.90
- 6.35
- 8
- 8.00 to 9.00
- 9
- 10
- 10～3.0
- 11
- 12
- 15
-
Maximum Groove Depth(mm)
-
Selfishly
-
Maximum Machining Diameter(mm)
-
Number of corners for tip use
-
Shank height(mm)
Narrow search by specifying Manufacturer
-
- KYOCERA (52)
- SANDVIK (37)
- SUMITOMO_ELEC_ (12)
- NGK SPARK PLUG (11)
- ISCAR (1)
- KOSHUHA (0)
CAD
-
- 2D
- 3D
Related Categories to Grooving / Cutting Off Holders
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy