(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
KYOCERA Turning Inserts（work material：Stainless Steel Page4）
| Days to Ship |
|
|---|
-
![Small-Nega for Automatic Grid CNGU [Middle to Roughing]](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005301387-196.jpg?$product_view_b$)
Small-Nega for Automatic Grid CNGU [Middle to Roughing]
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 40.00 Days to Ship: 6 Day(s) or more -
![Small-Nega for Automatic Grid CNGU [Low Feed]](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/80.jpg?$product_view_b$)
Small-Nega for Automatic Grid CNGU [Low Feed]
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: right handed
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 74.68 Days to Ship: 6 Day(s) or more -
![Small-Nega for Automatic Grid DNGU [Finishing to Middle]](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/55.jpg?$product_view_b$)
Small-Nega for Automatic Grid DNGU [Finishing to Middle]
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 97.48 Days to Ship: 6 Day(s) or more -
Small-Nega for Automatic Grid DNMU [Middle to Roughing]
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 55.35 Days to Ship: 6 Day(s) or more -
Small-Nega for Automatic Grid DNGU [Finishing]
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: right handed
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 97.48 Days to Ship: 6 Day(s) or more -
Small-Nega for Automatic Grid DNGU [Low Feed]
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: right handed
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 97.48 Days to Ship: 6 Day(s) or more -
![Small-Nega for Automatic Grid TNGU [Finishing]](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/60.jpg?$product_view_b$)
Small-Nega for Automatic Grid TNGU [Finishing]
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: right handed
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 72.49 Days to Ship: 6 Day(s) or more -
Sharp Edged Small-Nega for Automatic Grid TNGU [Low Feed]
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: right handed
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 72.49 Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-GF "for Finishing"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 56.82- Days to Ship: 5 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-CK "for Finishing"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 59.42- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 42.61- Days to Ship: 5 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 26.41- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 21.71- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 40.62- Days to Ship: 6 Day(s) or more -
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 39.56- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 57.43- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 50.55- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCET "Low-Feed"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 50.23- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CPMT○○GP "for Finishing"
KYOCERA
[Specifications]
· Shape: C (80° Diamond)
· Number of Usable Corners: 2
· Rake Angle: Positive
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: FinishingStandard Price: MYR 20.25- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 21.22- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 21.71- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CPMT "for Finishing" for Mild Steel
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 38.42 Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Minute Incision"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 50.85- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCGT○○-GF "for Finishing"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 67.79- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCGT○○-CK "for Finishing"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 60.72- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCMT○○GP "for Finishing"
KYOCERA
[Specifications]
· Shape: D (55° Diamond)
· Number of Usable Corners: 2
· Rake Angle: Positive
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: FinishingStandard Price: MYR 24.64- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 67.79- Days to Ship: 5 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 26.10- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 40.97- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 37.06- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing Cutting" for Mild Steel
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 38.42- Days to Ship: 6 Day(s) or more -
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 35.72- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCET○○-FSF/F "finishing"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 59.01- Days to Ship: 5 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Finishing"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 54.62- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCET "Low-Feed"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 59.01- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DPET "for Finishing"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 69.99- Days to Ship: 6 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DPET "Low-Feed"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 69.99- Days to Ship: 6 Day(s) or more -
Square 90°, Positive, with Hole SCMT "Finishing to Semi-Finishing"
KYOCERA
[Specifications]
· Shape: S (Quadrilateral)
· Number of Available Corners: 4
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 32.69 Days to Ship: 6 Day(s) or more -
Square 90°, Positive, with Hole SPGH "Finishing"
KYOCERA
[Specifications]
· Shape: S (Quadrilateral)
· Number of Available Corners: 4
· Rake Angle: Positive
· Handedness: Left-handed
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 50.55 Days to Ship: 6 Day(s) or more -
Square 90°, Positive, without Hole SPMR "Semi-Cutting"
KYOCERA
[Specifications]
· Shape: S (Quadrilateral)
· Number of Available Corners: 4
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 30.49- Days to Ship: 5 Day(s) or more -
Square 90°, Positive, without Hole SPGR "Finishing"
KYOCERA
[Specifications]
· Shape: S (Quadrilateral)
· Number of Available Corners: 4
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 50.23- Days to Ship: 6 Day(s) or more -
Square 90°, Positive, without Hole SPMN No Breaker "Cast Iron"
KYOCERA
[Specifications]
· Shape: S (Quadrilateral)
· Number of Available Corners: 4
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 34.88 Days to Ship: 6 Day(s) or more -
60° Triangle Positive with Hole TBGT "Fine Cutting"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 63.40- Days to Ship: 6 Day(s) or more -
60° Triangle Positive with Hole TBMT ○○DP "Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 34.88- Days to Ship: 4 Day(s) or more -
60° Triangle Positive with Hole TBGT "Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 50.23- Days to Ship: 4 Day(s) or more
![Small-Nega for Automatic Grid CNGU [Middle to Roughing]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005301387-196.jpg?$product_view_b$)
![Small-Nega for Automatic Grid CNGU [Low Feed]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/80.jpg?$product_view_b$)
![Small-Nega for Automatic Grid DNGU [Finishing to Middle]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/55.jpg?$product_view_b$)
![Small-Nega for Automatic Grid TNGU [Finishing]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/60.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-GF "for Finishing" | Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-CK "for Finishing" | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing" | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing" | Turning Insert Diamond 80°, Positive, with Hole, CCET "Low-Feed" | Turning Insert Diamond 80°, Positive, with Hole, CPMT○○GP "for Finishing" | Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CPMT "for Finishing" for Mild Steel | Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Minute Incision" | Turning Insert Diamond 55°, Positive, with Hole, DCGT○○-GF "for Finishing" | Turning Insert Diamond 55°, Positive, with Hole, DCGT○○-CK "for Finishing" | Turning Insert Diamond 55°, Positive, with Hole, DCMT○○GP "for Finishing" | Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Finishing to Intermediate Cutting" | Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting" | Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Intermediate Cutting" | Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Intermediate Cutting" | Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing Cutting" for Mild Steel | Turning Insert Diamond 55°, Positive, with Hole, DCET○○-FSF/F "finishing" | Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Finishing" | Turning Insert Diamond 55°, Positive, with Hole, DCET "Low-Feed" | Turning Insert Diamond 55°, Positive, with Hole, DPET "for Finishing" | Turning Insert Diamond 55°, Positive, with Hole, DPET "Low-Feed" | Square 90°, Positive, with Hole SCMT "Finishing to Semi-Finishing" | Square 90°, Positive, without Hole SPMN No Breaker "Cast Iron" | ||||||||||||||||
| Days to Ship | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Shape | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | T (Triangle) | T (Triangle) | T (Triangle) |
| work material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Application | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter |
| Available corners | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 4 | 3 | 3 | 3 |
| Breaker Use | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Finish | Medium grinding | Finish | Medium grinding | Finish | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Finish | Finish | Medium grinding | Finish | Medium grinding | Medium grinding | Finish | Finish | Finish | Finish | Finish | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Finish | Medium grinding | Finish | Finish | Medium grinding | Finish | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Finish | Medium grinding | Finish | Finish | Finish |
| Rake angle | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv |
| Nose R | 0.2 | Other | Other | 0.2 | Other | Other | Other | Other | Other | Other | Other | 0.2 ～ 1.2 | 0.2 ～ 0.8 | 0.8 | 0.4 ～ 0.8 | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.2 ～ Other | Other | 0.2 ～ Other | 0.2 ～ 0.8 | Other | 0.2 ～ 0.8 | 0.2 ～ Other | 0.8 | 0.2 ～ 0.8 | 0.2 ～ 0.4 | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.4 ～ 0.8 | 0.4 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.8 ～ 1.2 | 0.2 ～ Other | 0.2 ～ 0.4 | 0.2 ～ Other |
| Selfishly | No-hand | Right-hand | No-hand | No-hand | Right-hand | Right-hand | Right-hand | Right-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand / No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Left-hand | No-hand | Right-hand / Left-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand |
| Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Small-Nega for Automatic Grid CNGU [Middle to Roughing]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005301387-196.jpg?$product_view_c$)
![Small-Nega for Automatic Grid CNGU [Low Feed]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/80.jpg?$product_view_c$)
![Small-Nega for Automatic Grid DNGU [Finishing to Middle]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/55.jpg?$product_view_c$)
![Small-Nega for Automatic Grid TNGU [Finishing]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/60.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Shape
- C (80° Diamond-Shape)
- D (55° Diamond-Shape)
- R (Circular)
- S (Rectangular)
- T (Triangle)
- V (35° Diamond-Shaped)
- W (Hexagonal Type)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Medium to coarse grinding
-
Rake angle
- Negative
- Pozidriv
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
-
- MISUMI (4)
- SUMITOMO_ELEC_ (417)
- KYOCERA (240)
- SANDVIK (95)
- NGK SPARK PLUG (69)
- ISCAR (30)
- SANWASEISAKUSYO (4)
- DAISHOWASEIKI (3)
- OSG (3)
- DIJET (1)
- TUNGALOY (1)
- ECHAIN (0)
- NOGA_JAPAN (0)
- WIDIA (0)
- KOSHUHA (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy