(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
KONDO Hands, Grippers（Type：Main Body）
| Days to Ship |
|
|---|
-
Gripper, Chuck Thin Long Stroke Chuck CKJ Series
KONDO
Thin body long stroke type.
[Features]
· Thin hight and large holding force.
· Supports large work of diameter with the long stroke.
· Can use hollow specification with ø30 mm.
· Mount various sensors for overhanging, work checking, etc.Standard Price: MYR 8,555.40- Days to Ship: 27 Day(s) or more -
Hand Small Crossed Roller Parallel Hand BHG Series
KONDO
Cross roller parallel hand with rubber cover.
[Features]
· Improves environment resistant by attaching a rubber cover to prevent invasion of mist and dust.
· Cross roller bearing holding mechanism is used in the sliding area.
· Smooth movement.with high precision.
· Endures compact and large moment load by over wrapping and long holding mechanism.
· Supports clean room.
· Supports class 10 and class 1000Standard Price: MYR 1,467.96- Days to Ship: 9 Day(s) or more -
Long-Stroke Parallel Hand, Thin Type, HLC Series
KONDO
High resistant thin long stroke type by adopting linear guide.
[Features]
· Linear guide with thin long stroke.
· Thin and large open/close stroke.
· Double piston system with thin and high torque.
· Increases resistance by adopting the linear guide.
· High rigidity with long guide pitch of linear guide.
· Wide range of variation depending on its specification.
· Please select it based on 6 sizes and 11 types of stroke specification.
· Easy mounting on the front side through holeStandard Price: MYR 2,129.58- Days to Ship: 22 Day(s) or more -
Hand Crossed Roller Parallel Hand HK Series
KONDO
Smooth operation with bearing mechanism.
[Features]
· High precision and smooth operation with the cross roller guide.
· Cross roller bearing mechanism is used for the slide part.
· Smooth movement.with high precision.
· Compact and high rigidity.
· Endures compact and large moment load by over wrapping and long holding mechanism.
· Improves resistant environment with rubber cover (option).
· Prevents mist and dust invasion by installing the rubber cover with the slide part and increases the resistance to environment
· Sensor supported cutting oil resistant can be mounted.
· Supplied brackets are not needed.Standard Price: MYR 2,553.71- Days to Ship: 22 Day(s) or more -
Robot Peripheral Equipment, Rotation Chuck CKR Series
KONDO
[Features]
· Powerful chuck with rotation function.
· Compact design integrated with rotation function and powerful chuck.
· Fixed piping and wiring without effect of movement.
· With timing pulley suitable with positioning.Standard Price: MYR 4,755.26- Days to Ship: 27 Day(s) or more -
Gripper, Chuck Powerful Chuck CKL Series
KONDO
Low price even with think, light weighted compact and high holding force.
Standard Price: MYR 1,871.21- Days to Ship: 22 Day(s) or more -
Gripper, Chuck Long Stroke Chuck CK/CKB/CKD Series
KONDO
Full handling chuck focused on strokes.
[Features]
· Long running stroke of nail and no need to adjust it.
· There are 3 way claws, CK type, 2 way claws, CKB type and 4 CKD type.
· Body has light weight and compact design to deal with and has strong holding forceStandard Price: MYR 3,907.00- Days to Ship: 27 Day(s) or more -
KONDO
Cam type without combination adjustment need.
[Features]
· Special cam type without combination adjustment need.
· Parallel movement: Parallel type with bearing and special cam and efficient holding force with 15% increase.
· Long running stroke: Light weight and compact design with long combination range of 8 mm stroke for easy handling.Standard Price: MYR 1,467.96- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 3,002.22- Days to Ship: 27 Day(s) or more -
Gripper, Thin Chuck CKS/CKSF Series
KONDO
Pursues its thinness. Effective for the limited space of equipment.
[Features]
· Change the cylinder inside to transverse configuration from traditional vertical configuration and decrease the thickness after stretching the stroke.
· Can fit easily in the space limited in the equipment.
· Minimizes complications by changing the traditional bulk type to a linear motion type as well as minimizes malfunction caused by grease shortages.
· New product of hollow and large type.
· Pusher mounted the thickness without change.
· Stable work supply by pushing 3 points.
· Increases the effect of dust proofing by narrowing the gap between the child claws and the bodyStandard Price: MYR 2,040.86- Days to Ship: 27 Day(s) or more -
KONDO
Hollow type and multi-function embedded. In addition, light weight and compact design.
Standard Price: MYR 2,776.01- Days to Ship: 27 Day(s) or more -
Hand rubber cover thin model parallel hand (cross-roller type) HLBG series
KONDO
Thin parallel hand with rubber cover.
[Features]
· Cross roller type.
· Bearing guide with cross roller type and achieves smooth and high precision operation.
· Compact and long stroke.
· Compact design with low height.
· Stroke is long and support combination of large and small works.
· Improves resistant environment with rubber cover.
· Prevents mist and dust invasion by installing the rubber cover with the slide part and increases the resistance to environmentStandard Price: MYR 2,090.00- Days to Ship: 22 Day(s) or more -
Hand great retention 180° wide angle hand HJD series
KONDO
Thin hand with wide angle of 180 degrees opening/closing.
[Features]
· Large holding force hand with wide angle of 180° opening/closing.
· Small and strong holding force with toggle structure: Simple operation with wide angle of 180° opening/closing.
· Piston guide adoption: Increase repeat accuracy by preventing drift of piston operation.
· Increase durability without loading the piston directly.
· Increase rigidity for guide to receive external stress of master jaw.Standard Price: MYR 2,146.55- Days to Ship: 27 Day(s) or more -
Hand Large Gripping Force Parallel Hand HH Series
KONDO
Parallel hand with light weight and high holding force.
[Features]
· Parallel hand with light weight and high holding force.
· Saving space: No need of space when mounting hand with low overall height.
· Light weight and large holding force: Can choose a robot one rank lower compared to the traditional product.
· High rigidity and high resistance: Impact resistance T type slide guide.Standard Price: MYR 12,939.81- Days to Ship: 27 Day(s) or more -
CKL/BHA-FC Series, Clean/Special Mechanical Hand and Mechanical Chuck
KONDO
[Features]
· Suitable to the hand for rotary table and shuttle mover can't use air piping.
· Holds outer diameter with spring and suitable with heat resistant hand with packing not used.
· Drives by external force of the opening side and supports high speed tact.Standard Price: MYR 1,758.12- Days to Ship: 27 Day(s) or more -
Chuck 4 Nail 2 Drive Chuck CKE Series
KONDO
Supports deformed object and chuck compatible for handling.
Standard Price: MYR 5,694.51- Days to Ship: 27 Day(s) or more -
Gripper, Thin Chuck CKA/CKB/CKD Series
KONDO
Body is light weight and compact to deal with. And powerful handling design. Select from 3 types of nails depending on its usage.
[Features]
· Long running stroke of nail and no need to adjust it.
· Has 3 way claws, CKA type, 2 way claws, CKB type, and 4 way claws, CKD type.
· Body has light weight and compact design to deal with and has strong holding forceStandard Price: MYR 1,588.47- Days to Ship: 27 Day(s) or more -
Hand, Crab Type Parallel Hand, HF Series
KONDO
Strong compact tool not needing combination adjustment.
Standard Price: MYR 3,334.10- Days to Ship: 27 Day(s) or more -
HLAG Series Bushing Type Rubber-coated Slim Parallel Hand
KONDO
Thin and compact parallel hand.
[Features]
· Thin and compact parallel hand.
· High impact resistant bush guide is used.
· Compact design with low height.
· Long running stroke with nail and no need for combination adjustment.
· Prevents mist and dust invasion by installing the rubber cover with the slide part and increases the resistance to environmentStandard Price: MYR 1,185.20- Days to Ship: 22 Day(s) or more -
Standard Price: MYR 1,637.60- Days to Ship: 27 Day(s) or more -
KONDO
High holding force with compact body.
[Features]
· High holding force with compact body.
· Small and large holding force with the toggle mechanism.
· Can mount sensor confirming open/close.
· Improves repeat precision, resistance and rigidity by piston guideStandard Price: MYR 2,146.55- Days to Ship: 27 Day(s) or more -
Hand mini parallel hand HMA series
KONDO
Compact size with light weight and small.
[Features]
· Compact size with light weight and small.
· Compact body with integration.
· Simplified with cylinder integrated structure.
· Lower price.
· Wide variety.
· HMA5 models (ø10, ø12, ø16, ø20, ø25) have been added, along with other series, for a total of 24 models ranging in cylinder diameters of between ø10 and ø100.
· Supports any works.
· Wide range of options.
· Can mount switch confirming open/closeStandard Price: MYR 1,015.56- Days to Ship: 22 Day(s) or more -
Hand mini one fulcrum hand HMB series
KONDO
Low cost, small, light weight and compact.
[Features]
· Low cost, small, light weight and compact.
· Compact body with integration.
· Simplified with cylinder integrated structure.
· Lower price.
· Wide variety.
· HMB4 models have been added, making a total of 10 available models ranging in cylinder diameters of between ø10 and ø40.
· Wide range of options.
· You can choose the body color based on the machine body (standard is calm dark brown) and you can mount a switch confirming open/close.
· Sensor confirming open/close.
· Mounting switch in 2 locations with all models of the series.Standard Price: MYR 631.02- Days to Ship: 27 Day(s) or more -
KONDO
Hand pursued by high resistance associated with speeding up the equipment.
[Features]
· Hand pursued by high resistance associated with speeding up the equipment.
· High rigidity, high precision, and long life by adopting an unity form of linear guide.
· Supports long nails.
· Supports low sliding (option).
· Centering precision ±0.05 mm (option).
· Supports rubber cover (option).
· New L1 series with running stroke doubledStandard Price: MYR 1,224.79- Days to Ship: 9 Day(s) or more -
Hand long stroke parallel hand HG series
KONDO
Stroke focused and full force with light weight and compact.
[Features]
· Stroke focused and full force with light weight and compact.
· Super long stroke hand.
· Super long stroke by increasing cam ratio.
· Light weight and compact.
· Light weight and compact body.
· Thin for easy handling.
· Easy mounting.
· Mounting from any direction with 3 directions of mounting surface.
· Sensor confirming open/close.
· Mounting switch in 2 locations with all models of the seriesStandard Price: MYR 3,390.65- Days to Ship: 27 Day(s) or more -
Hand thin-type long stroke hand HLF series
KONDO
Thin, light weight and low price. 25% of height and 30% of weight DOWN compared to the traditional products.
[Features]
· Thin and light weight.
· 25% of height DOWN and 30% of weight DOWN.
· High holding force.
· Large holding force with the double piston system.
· Mounting from 4 directions.
· Body is mounted by the body mounting tap in 4 directions and through hole in 1 direction.
· Long stroke.
· Supports even with many kinds of works.
· Supports sensors confirming various open/close.
· Supports contact-less sensor, contact sensor and cutting oil supporting sensorStandard Price: MYR 1,750.71- Days to Ship: 22 Day(s) or more -
Hand thin-type wide-angle hand HMD series
KONDO
Thin hand with wide angle of 180 degrees opening/closing.
[Features]
· Wide angle open/close with 180°.
· No need with up and down movement when pick and press due to wide angle and easy positioning.
· Strong holding force with toggle mechanism.
· Can mount sensor confirming open/close.
· New lineup with 12AS, 20ASStandard Price: MYR 874.18- Days to Ship: 27 Day(s) or more -
Thin Parallel Hand (Cross Roller Type) HLB Series
KONDO
Thin parallel hand with smooth operation and high precision. Compact and long stroke.
Standard Price: MYR 1,920.36- Days to Ship: 22 Day(s) or more -
Hand Thin Model Parallel Hand (Bush Type) HLA Series
KONDO
Thin and compact parallel hand.
[Features]
· Bush guide.
· High impact resistant bush guide is used.
· Supports combination of large and small works.
· Compact design with low height.
· Long running stroke of nail and no need for combination adjustmentStandard Price: MYR 1,015.56- Days to Ship: 9 Day(s) or more -
Hand ultra small cross-roller parallel hand BSA series
KONDO
Super small type with multiple mountings.
[Features]
· Super small type with multiple mountings.
· Super small parallel hand: Overall length of 50 mm.
· Width of 25 mm.
· Super small type with only 10 mm of thinness.
· Suitable with delivery and assembly of small work.
· Easy mounting: Side surface mounting (tap and run through hole) and top surface mounting (tap).
· Multiple mounting where multiple works are locked at the same time.
· High precision and smooth operation with cross roller guide: Cross roller guide is used in the slide part.
· High precision and smooth operation with pre-load and without rattle.Standard Price: MYR 1,026.86- Days to Ship: 27 Day(s) or more -
Hand Wide Angle Hand HD Series
KONDO
[Features]
· Smooth movement without any reaction.
· Nail open angle of 180°: Small invasion space with no interference of work and nail and no need to have auxiliary slide.
· Easy mounting: 3 directions of mounting surface and any direction of mounting is possible.
· Light weight and compact: Body is light weight and compact. And powerful holding force.
· Sensor conforming open/close: Mounting switch in 2 locations with all models of the series.Standard Price: MYR 2,485.85- Days to Ship: 27 Day(s) or more -
Hand side parallel hand HC series
KONDO
Full force of thin, light weight and compact.
[Features]
· Full force of thin, light weight and compact.
· No need of combination adjustment: No inconvenient adjustment needed with long nail of running stroke and parallel clamp (centripetal movement).
· Easy mounting: 3 directions of mounting surface and any direction of mounting is possible.
· Thin, light weight and compact: Thin body for easy treatment.
· And light weight and compact.
· Standard of bearing specification.
· Sensor conforming open/close: Mounting switch in 2 locations with all models of the series.Standard Price: MYR 2,033.45- Days to Ship: 27 Day(s) or more -
Parallel Hand, Small Crab Type, HMF Series
KONDO
Crab type parallel hand with low height and a wide range of combination.
Standard Price: MYR 1,524.50- Days to Ship: 22 Day(s) or more -
Hand Small Crossed Roller Parallel Hand BHA Series
KONDO
[Features]
· Smooth movement and powerful holding force.
· High precision and smooth movement with cross roller guide: Cross roller guide is place in the slide part.
· High precision and smooth operation with pre-load and without rattle, can move with 1MPa.
· Compact and powerful holding force: Endures large moment load by over wrapping the slide part with long holding mechanism.
· Mount sensor conforming open/close: Mount contact less switch in 2 locations with all models.Standard Price: MYR 1,298.31- Days to Ship: 9 Day(s) or more -
Hand, HB Series Single Fulcrum Handle
KONDO
Compact with low cost and light weight.
[Features]
· Achieves low cost.
· In addition, light weight, compact and strong holding force.
· Mounting surfaces are in 3 directions and can be mounted in any directions.
· Can mount contactless switches in 2 locations (except HB-1M)Standard Price: MYR 789.35- Days to Ship: 22 Day(s) or more -
Large Gripping Force Hand, HHC Series
KONDO
A large gripping force hand with a space-saving design.
[Features]
・ Compact and weight reduced due to the adoption of an oval piston.
・ High gripping force and long stroke have been achieved by the direct drive method.
・ By adopting a T-shaped slide guide that is resistant to impact, long jaws are also supported.
・ It is also compatible with cutting oil resistant sensors.Standard Price: MYR 8,727.76- Days to Ship: 27 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Number of Fingers |
| Main Body Shape |
| Gripping Methods |
| Operation Method |
| Open Dimension L1(mm) |
| Closed Dimension L2(mm) |
| Type |
| Gripping Force (when 0.5Mpa at closing)(N) |
| Gripping Force (when 0.5Mpa at opening)(N) |
| Maximum Gripping Force (Opening Side, Electric Type)(N) |
| Maximum Gripping Force (Closing Side, Electric Type)(N) |
| Environment, Applications |
| Additional Functions |
| Stroke Adjustment Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO | KONDO |
| Product Series | Hand rubber cover thin model parallel hand (cross-roller type) HLBG series | CKL/BHA-FC Series, Clean/Special Mechanical Hand and Mechanical Chuck | ||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship | 27 Day(s) or more | 9 Day(s) or more | 22 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 9 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 9 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 9 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 22 Day(s) or more | 9 Day(s) or more | 22 Day(s) or more | 27 Day(s) or more |
| Number of Fingers | 2 pcs. / 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 3 pcs. | 2 pcs. / 3 pcs. | 3 pcs. | 2 pcs. | 3 pcs. | 3 pcs. | 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | Others | 3 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. | 2 pcs. |
| Main Body Shape | Special Shape | Square Shape | Square Shape (Flat Shape) | Square Shape | Cylindrical Shape | Special Shape | Special Shape | Square Shape / Cylindrical Shape | Special Shape | Special Shape | Hollow Shape | Square Shape | Square Shape | Square Shape | Square Shape | Special Shape | Special Shape | Square Shape (Wide) | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape (Flat Shape) | Square Shape | Square Shape | Square Shape | Square Shape | Square Shape | Lateral Shape | Square Shape (Wide) | Square Shape | Square Shape | Square Shape |
| Gripping Methods | Pinch, Chuck Type / Open, Chuck Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Chuck Type / Open, Chuck Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type / Open, Swing Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type / Open, Swing Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Parallel Type / Open, Parallel Type | Pinch, Swing Type / Open, Swing Type | Pinch, Chuck Type / Open, Chuck Type |
| Operation Method | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - | - | - | - | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - | - | - | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - | - | - | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | - | - | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type / Single Acting Type (Normally Open) / Single Acting Type (Normally Closed) | Double Acting Type |
| Open Dimension L1(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 65 ～ 67 |
| Closed Dimension L2(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 41 ～ 45 |
| Type | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Gripping Force (when 0.5Mpa at closing)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Gripping Force (when 0.5Mpa at opening)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Gripping Force (Opening Side, Electric Type)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Gripping Force (Closing Side, Electric Type)(N) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Environment, Applications | Standard | Standard / Dust Resistant / Drip Resistant | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Dust Resistant / Drip Resistant | Standard | Standard | Standard / Available in Cleanroom Environment | Standard | Standard | Standard | Standard / Dust Resistant / Drip Resistant | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Additional Functions | Not Provided | Bearing Support / High Accuracy | With Linear Guide | Bearing Support / High Accuracy | Not Provided | Not Provided | Not Provided | Bearing Support | Bearing Support / High Accuracy | Not Provided | Not Provided | High Accuracy | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | High Accuracy | Not Provided | Not Provided | Not Provided | With Linear Guide / High Accuracy | Not Provided | Not Provided | Not Provided | High Accuracy | Not Provided | High Accuracy | Not Provided | Not Provided | Not Provided | High Accuracy | Not Provided | Not Provided |
| Stroke Adjustment Mechanism | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Open Direction Adjustment / Close Direction Adjustment / Open/Close Dual Adjustment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Configure
Specification/Dimensions
-
Number of Fingers
- 2 pcs.
- 3 pcs.
- Others
-
Main Body Shape
-
Gripping Methods
-
Operation Method
- Double Acting Type
- Single Acting Type (Normally Open)
- Single Acting Type (Normally Closed)
-
Open Dimension L1(mm)
- 4
- 5
- 5.4
- 6
- 6.8
- 7
- 7.4
- 7.8
- 8
- 9.4
- 9.5
- 9.7
- 10
- 10.8
- 11
- 11.6
- 11.8
- 12
- 12.5
- 12.6
- 12.8
- 13
- 13.4
- 13.5
- 14
- 15
- 15.2
- 15.5
- 16
- 17
- 17.2
- 17.5
- 18
- 18.5
- 19
- 19.2
- 19.5
- 19.6
- 20
- 20.6
- 20.9
- 21.5
- 22
- 22.8
- 23.5
- 24
- 25
- 26
- 26.3
- 26.5
- 26.9
- 27
- 28
- 28.6
- 30
- 30.5
- 31
- 32
- 33
- 33.3
- 34
- 34.3
- 35
- 35.5
- 36
- 37
- 38
- 40
- 41
- 41.3
- 42
- 43
- 44
- 47.5
- 48
- 48.5
- 51
- 52
- 53.5
- 59
- 60
- 62
- 63.5
- 64
- 65
- 67
- 68
- 70
- 73
- 76
- 78
- 80
- 80.5
- 82
- 92
- 98
- 102
- 103
- 114
- 118
- 122
- 132
- 134
- 138
- 150
- 156
- 166
- 170
- 172
- 186
- 204
- 210
- 220
- 222
- 226
- 238
- 262
- 266
- 278
- 282
- 288
- 298
- 318
- 320
- 336
- 402
- 406
- 486
-
Closed Dimension L2(mm)
- 0
- 1
- 1.4
- 1.6
- 2
- 3
- 5
- 5.5
- 5.7
- 6.6
- 6.8
- 7
- 7.2
- 7.5
- 7.8
- 8
- 8.5
- 8.8
- 9
- 9.5
- 10
- 10.5
- 10.8
- 11
- 11.2
- 11.5
- 11.8
- 12
- 12.8
- 13
- 13.5
- 14
- 14.5
- 14.6
- 14.9
- 15
- 16
- 16.3
- 16.5
- 17.5
- 18
- 18.5
- 19
- 19.3
- 19.5
- 20
- 21
- 22
- 23
- 23.5
- 24
- 25
- 26
- 28
- 28.5
- 30
- 31
- 31.5
- 33
- 34
- 35
- 36
- 37
- 37.5
- 38
- 41
- 42
- 43
- 44
- 45
- 45.5
- 46
- 48
- 51
- 53.5
- 54
- 56
- 60.5
- 62
- 63
- 66
- 68
- 70
- 72
- 78
- 79
- 82
- 84
- 86
- 94
- 96
- 98
- 100
- 110
- 112
- 116
- 124
- 126
- 130
- 142
- 146
- 150
- 158
- 162
- 166
- 178
- 182
- 188
- 198
- 200
- 216
- 242
- 246
- 286
-
Type
- Main Body
- Related Components
- Main Body(Electric Type)
-
Gripping Force (when 0.5Mpa at closing)(N)
- 0.08
- 0.20
- 1,240
- 1,270
- 1.2
- 1.9
- 2
- 2.4
- 3,600
- 3.2
- 3.3
- 3.4
- 5.2
- 5.7
- 6,300
- 6.3
- 6.5
- 7
- 7.1
- 8
- 9
- 9.5
- 9.6
- 9.8
- 10
- 10,600
- 11
- 12
- 13
- 14
- 14.3
- 15
- 16
- 17
- 17.5
- 19
- 21
- 23
- 24
- 25
- 26
- 27
- 28
- 29.2
- 29.4
- 30
- 31
- 32
- 33
- 34
- 36
- 37
- 41
- 42
- 45
- 46
- 47
- 48
- 49
- 50
- 53
- 53.7
- 55
- 56
- 58
- 62
- 63
- 65
- 68
- 69
- 74
- 75
- 79
- 80
- 88
- 90
- 94.9
- 97
- 111
- 118
- 130
- 131
- 140
- 141
- 144
- 153.1
- 155
- 158
- 177
- 187
- 217
- 228
- 251
- 254
- 280
- 335
- 396
- 400
- 500
- 502
- 750
-
Gripping Force (when 0.5Mpa at opening)(N)
- 0.08
- 0.20
- 1,320
- 2
- 3.2
- 3.7
- 5.2
- 5.7
- 6.1
- 6.5
- 7.8
- 9.5
- 11
- 12
- 12.3
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 21
- 21.2
- 22
- 23
- 25
- 26
- 28
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 40
- 42
- 44
- 45
- 46
- 47
- 48
- 49
- 53
- 56
- 57
- 59
- 61
- 63
- 66
- 68
- 71
- 73
- 74
- 77
- 82
- 83
- 85
- 86
- 90
- 97
- 100
- 104
- 108
- 118
- 123
- 127
- 130
- 131
- 139
- 141
- 153
- 161
- 169
- 187
- 193
- 195
- 204
- 227
- 228
- 247
- 267
- 268
- 279
- 306
- 318
- 329
- 359
- 396
- 490
- 525
- 537
- 780
-
Maximum Gripping Force (Opening Side, Electric Type)(N)
-
Maximum Gripping Force (Closing Side, Electric Type)(N)
-
Environment, Applications
-
Additional Functions
-
Stroke Adjustment Mechanism
Narrow search by specifying Manufacturer
-
- MISUMI (1)
- SMC (38)
- KONDO (36)
- CKD (15)
- PISCO (13)
- MEG (6)
- AIRTAC (3)
- KOGANEI (1)
- FESTO (0)
- ORIENTAL MOTOR (0)
CAD
-
- 2D
- 3D
Related Categories to Hands, Grippers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy