(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
FUTAMURAKIKI Lathe Jigs（Tip Carbide Insert (Y/N)：N/A）
| Days to Ship |
|
|---|
-
FUTAMURAKIKI
[Features]
· Inside this product, there are two ball bearings on M.T No. 1 and No. 2, and 1 thrust bearing. 3 types of each of taper roller bearing, thrust bearing and ball bearing are used for M.T No. 3 to No. 7.Standard Price: MYR 1,471.00- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
[Features]
· Forcing nut is equipped on the rear part of the main body to be able to remove from the front part of the tailstock.
· Inside this product, combined angular bearing (3 pcs) and needle bearing are used, which makes smooth rotation torque.
· A and C type are fine type, suitable for screw cutting and edge surface processing.
· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.Standard Price: MYR 4,044.60- Days to Ship: 7 Day(s) or more -
Rolling Center 100 With Stickers
FUTAMURAKIKI
[Features]
· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
· 3 bearing including 2 needle bearings and 1 thrust bearing are used inside this product, and the main body diameter is designed to be small.
· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.
· V seal is adopted and suitable when cutting oil is used.Standard Price: MYR 1,645.71- Days to Ship: 7 Day(s) or more -
Work Driving Center DK Claw Fixed
FUTAMURAKIKI
[Features]
· Ideal for gear cutting, spline processing, keyway processing, and woodworking.
· There will be no need of chuck if this device is used.
· As the processing items are maintained in both centers, the finishing of the processed items are the best.
· Single-action detaching / attaching of processed items is possible.
· By using the extraction nut, it is easy to remove from the machine.Standard Price: MYR 3,787.09- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
[Features]
· The product is designed by focusing on the super high speed rotation (7000 min-1) and high accuracy (TIR 0.003).
· Carbide insert is attached on the tip part to withstand abrasion and friction due to super high speed rotation. (A type)
· By using the combined angular bearing (3 places) and two types of bearings of needle bearings inside this product, it is finely designed and assembled to withstand rigidity.
· The use of a unique labyrinth mechanism (non-contact) as a measure to prevent immersion when cutting oil is used eliminates wear, friction, and power loss, reduces the temperature rise of the machine, and improves accuracy and reliability of lifespan.Standard Price: MYR 4,972.86- Days to Ship: 11 Day(s) or more -
FUTAMURAKIKI
[Features]
· Angular bearing, thrust bearing and needle roller bearing are used for smooth rotation torque.
· Suitable for screw cutting and edge surface processing, as A, C and E-type are fine type.
· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.Standard Price: MYR 2,941.63- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
[Features]
· Since the processing heat generated by the elongation of the workpiece is absorbed by the flat spring built into the center, there is no distortion of a workpiece and its finishing accuracy improves.
· The thrust load generated by the elongation of the workpiece is also absorbed to the slide mechanism, and it is designed not to apply load to the bearing directly.Standard Price: MYR 2,619.55- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
[Features]
· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
· 2 needle bearings and 3 thrust bearings are used inside this product, and the main body diameter is designed to be small.
· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.Standard Price: MYR 984.07- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
Large bearings have been adopted and the main unit O.D. and center shaft diameter have been made thicker in order to withstand larger loads than a standard type
Standard Price: MYR 5,042.75- Days to Ship: 11 Day(s) or more -
FUTAMURAKIKI
[Features]
· Center runout (maximum) against M.T. is TIR 0.01.
· Hydraulic mechanism is adopted to the claw operation and the edge surface is maintained evenly by independent operation of the claw.
· The claw and the center shaft are made of high-speed steel to achieve high durability.Standard Price: MYR 5,983.93- Days to Ship: 7 Day(s) or more -
Work Driving Center, HD-Type Replacing Claw
FUTAMURAKIKI
When the claw of the work driving center is worn and damaged, promptly replace the claw before using.
Standard Price: MYR 744.79- Days to Ship: 11 Day(s) or more -
Umbrella Type Rotation Center BRC
FUTAMURAKIKI
[Features]
· Used for lathes and cylindrical grinding machines.
· Used for center pushing tool of pipe type, ring type and thin processed items.
· Inside this product, 3 types, each one of taper roller bearing, thrust bearing and ball bearing, are prepared.Standard Price: MYR 2,123.52- Days to Ship: 7 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type |
| Mounting type |
| Compatible Chuck Nominal Size |
| Jaw Height(mm) |
| Compatible Manufacturer |
| Chuck Outer Diameter(mm) |
| Number of Jaws |
| Shank MT No |
| Tip Carbide Insert (Y/N) |
| Tip Width Across Flat(mm) |
| Auxiliary Jig Type |
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI |
| Product Series | ||||||||||||
| Days to Ship | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more |
| Type | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center |
| Mounting type | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Chuck Nominal Size | - | - | - | - | - | - | - | - | - | - | - | - |
| Jaw Height(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Manufacturer | - | - | - | - | - | - | - | - | - | - | - | - |
| Chuck Outer Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of Jaws | - | - | - | - | - | - | - | - | - | 5 ～ 8 | - | - |
| Shank MT No | MT1 ～ MT6 | MT3 ～ MT5 | MT2 ～ MT5 | MT3 ～ MT4 | MT3 ～ MT5 | MT3 ～ MT5 | MT3 ～ MT5 | MT2 ～ MT5 | MT5 ～ MT6 | MT4 ～ MT5 | - | MT2 ～ MT6 |
| Tip Carbide Insert (Y/N) | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Tip Width Across Flat(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Auxiliary Jig Type | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Type
- Soft Jaw
- Soft Jaw Molding Jig / Soft Jaw Molding Holder
- Lathe Chuck
- Rotation Center / Lathe Center
- Scroll Chuck Handle
- Jaw Nut
- Tailstock / Auxiliary Jig
-
Mounting type
- Serrated Type
- Upper and Lower Divided Jaw Type
-
Compatible Chuck Nominal Size
- B-212
- B-210
- B-208
- B-206
- B-205
- B-21
- B-15
- B-12
- B-10
- B-08
- B-06
- 4
- 5
- Type B 05
- Type HJ 5
- 5、6、8
- 5～8
- 6
- Type B 06
- Type GO 6
- 6、8、10
- 6～10
- 7
- 7・8
- 8
- Type B 08
- Type H 8-46
- 8、10、12
- 8～12
- 9
- 9・10
- 10
- Type B 10
- Type GO 10
- Type H 10-67
- 12
- Type B 12
- Type HJ 12
- 14～16
- 15
- Type B 15/18
- 15～22
- 16
- 18
- 21
- Type B 21/24
- Type HJ 24
- 80
- 85
- 110
- 130
- 140
- 160
- 165
- 190
- 200
- Type B 204/205
- Type B 206
- Type B 208
- Type B 210
- Type B 212
- Type B 215
- 230
- 250
- 273
- 310
- 385
- 400
- 460
- 500
-
Jaw Height(mm)
-
Compatible Manufacturer
- Kitagawa
- Howa
- Nikko
- Matsumoto
- Hitachi
- Victor
- Other
-
Chuck Outer Diameter(mm)
-
Number of Jaws
-
Shank MT No
-
Tip Carbide Insert (Y/N)
- Yes
- N/A
-
Tip Width Across Flat(mm)
-
Auxiliary Jig Type
- Die Holder
- Dog
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- SANYOSEISAKUSYO (14)
- FUTAMURAKIKI (12)
- KABUTO MFG (8)
- TAKURA KOGU (3)
- TRUSCO NAKAYAMA (2)
- NSK (1)
- GIGA SELECTION (0)
- ARM SANGYO (0)
- NEW STRONG (0)
- OKUKAWATEKOUSYO (0)
- KITAGAWATEKKO (0)
- THE_CUT (0)
- TEIKOKU_CHUCK (0)
- KOBAYASHITEKKO (0)
- KAWASHIMO (0)
CAD
-
- 2D
- 3D
Related Categories to Lathe Jigs
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy