(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

FPTOOLS
[Features]
· Cutting speed can be increased by 50% compared to carbide straight blade types.
· Ideal for deep drilling: Long neck section.
· Excellent anterior chip discharge: 30° torsion, left
| Standard Price: | MYR 392.70- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
| Standard Price: | MYR 116.51- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Reamer FP Platinum Reamer
FPTOOLS
[Features]
· Reamer shape ideal for high-speed machining: Achieves high-precision and high-speed machining thanks to its high torsion, highly rigid blade shape and eccentric chamfer blade.
· Special coating: Features a special coating with an excellent oxidation resistance temperature and friction coefficient. This coating helps improve the tool service life and allows smooth cutting chip processing.
· High-precision end mill shank: Shank tolerance of h5 is adopted.
· Effective for machining stainless steel: General-purpose F.P. Platinum Reamer can even be used for high-speed machining of stainless steel.
| Standard Price: | MYR 469.30- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.
· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.
· High durability: Excellent durability, maintaining precision over long periods of time.
· Application: General work materials.
| Standard Price: | MYR 280.33- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
· Ultra-low price contributes to cost reductions.
· Carbide is used for the reamer, greatly reducing the price.
· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.
· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.
· The processing range can be expanded.
· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".
· Can be used with peace of mind
| Standard Price: | MYR 162.33- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Carbide Reamer CE Series (formerly SH Series)
FPTOOLS
Complete blind hole drilling is possible. Newly developed special blade coating. End mill shank is adopted.
* Product name was changed from SH to CE. Although there is no change in the standards and price, the label of the delivered product may be that of the former SH series.
| Standard Price: | MYR 531.74- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
· Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and short blade length.
· As the bite length is short, it is capable of processing blind holes.
· The cobalt HSS has been coated with a newly developed special coating featuring coating hardness of 3,700 Hv, providing excellent abrasion resistance.
· End mill shank is adopted.
| Standard Price: | MYR 252.63- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

F.P. Gold Reamer Straight Blade
FPTOOLS
[Features]
· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.
· Furthermore, it also boasts a super-low price with a discount of approximately 50%.
· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.
· Outstanding circularity and surface roughness.
· Shank diameter is endmill shank type.
| Standard Price: | MYR 132.30- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

FPTOOLS
[Features]
· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.
· Furthermore, it also boasts a super-low price with a discount of approximately 50%.
· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.
· Outstanding circularity and surface roughness.
· Shank diameter is endmill shank type.
| Standard Price: | MYR 146.19- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

FPTOOLS
[Features]
· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.
· Blade diameter tolerance is unique at +0.005/0(J5).
| Standard Price: | MYR 122.88- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
Made using cobalt HSS for even longer cutting life. Also effective with thermally refined materials of 40 HRC or less.
| Standard Price: | MYR 145.47 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Straight Shank Chucking Reamer
FPTOOLS
[Features]
Chucking reamer that widens hole while rotating workpiece during cutting.
| Standard Price: | MYR 371.72- |
|---|---|
| Days to Ship: | 5 Day(s) or more |
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tool Diameter(mm) |
| Groove Length(mm) |
| work material |
| Shank Type |
| Coating Y/N |
| Groove Shape |
| Base Blade Y/N |
| Tip diameter |
| Large End Diameter |
| radius R |
| Both square |
| Brand | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | ||||||||||||
| Days to Ship | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Tool Diameter(mm) | 1 ~ 15.5 | 0.2 ~ 12.1 | 2.95 ~ 12.005 | 0.5 ~ 10.009 | 2.91 ~ 12.1 | 1 ~ 14.05 | 1 ~ 12.095 | 1 ~ 14.05 | 1 ~ 14.1 | 0.3 ~ 16.02 | 6.5 | 1 ~ 14 |
| Groove Length(mm) | 8 ~ 45 | 3 ~ 45 | 15 ~ 40 | 5 ~ 40 | 20 ~ 25 | 5 ~ 30 | 12 ~ 30 | 20 ~ 85 | 20 ~ 85 | 7 ~ 95 | 35 | 20 ~ 50 |
| work material | Die Steel[○] | Die Steel[◎] | Die Steel[◎] | Die Steel[◎] | Die Steel[◎] | Die Steel[◎] | Die Steel[○] | Die Steel[○] | Die Steel[○] | Die Steel[○] | Die Steel[○] | Die Steel[○] |
| Shank Type | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank / straight shank | straight shank | straight shank |
| Coating Y/N | NA | NA | Available | NA | NA | Available | Available | Available | Available | NA | NA | NA |
| Groove Shape | Spiral | Straight | Spiral | Straight | Straight | Spiral | Spiral | Straight | Spiral | Straight | Spiral | Straight |
| Base Blade Y/N | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA |
| Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - |
| Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - |
| radius R | - | - | - | - | - | 1 ~ 2.5 | - | - | - | - | - | - |
| Both square | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy