(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
ENGINEER Screwdrivers
| Days to Ship |
|
|---|
-
ENGINEER
[Features]
· Pocket-sized precision screwdriver.
· Machine-knurled fine shaft for excellent workability in recesses.
[Applications]
· For small precision screws used in time pieces, cameras, glasses, etc.Standard Price: MYR 13.33- Days to Ship: 9 Day(s) -
ENGINEER
Knurled driver can perform rapid turning.
[Features]
· The shaft is made of chrome-vanadium steel, and the tip has undergone black point processing.
· A large grip that produces high clamping force.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 24.67 Days to Ship: 9 Day(s) -
Mini Soft Screw Driver DG-21 – 24
ENGINEER
Mini soft screwdriver ideal for tightening and removing various screws.
[Features]
· It is a soft grip which fits well in the hand.
· The shaft is chrome-vanadium steel.
· The tip has been black-point processed.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 32.13 Days to Ship: 10 Day(s) -
Ceramic Adjustment Screwdriver DA-48 – 52
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties.
· Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)
· Pencil-type portable design with caps for protecting tip.
[Applications]
· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.
· For work related to wireless devices, computers and communications.Standard Price: MYR 140.81 Days to Ship: 8 Day(s) -
Ceramic Adjustment Screwdriver, Detachable DA-72 – 79
ENGINEER
Thin-shaft ceramic adjustment screwdriver that's ideal for trimmer adjustment of deep areas.
[Features]
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· Since the shaft portion and the handle can be detached, it is also possible to use it mounted on machines, etc.
[Applications]
· This fine shaft type is ideal for adjustment of chassis parts and other deep areas.Standard Price: MYR 85.03 Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver Set DK-90
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).
· Pencil-type portable design with caps for protecting tip.
· 4 piece set of DA-48 and 50 to 52.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Standard Price: MYR 461.49 Days to Ship: 8 Day(s) -
ENGINEER
A mini soft screwdriver set with a soft grip which fits well in the hand.
[Features]
· It is a soft grip which fits well in the hand.
· The shaft is made of a special alloy steel used in the manufacturing industry, and has been hardened over the whole length.
· The tip has been black-point processed.
· It has a chrome plated finish.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 113.28 Days to Ship: 8 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
| |
| Brand | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER |
| Product Series | |||||||
| Days to Ship | 9 Day(s) | 9 Day(s) | 10 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) |
| Tip standards | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) |
| Tip size / Phillips (+) | - | - | - | - | - | Other | No.00 / No.0 |
| Tip size / flathead (-) blade width (mm) B1 | 1.2 ～ 3 | 3 | 3 | 0.9 ～ 1.8 | 1.8 | 0.8 ～ 2.5 | 3 ～ 4 |
| Shaft length L (mm) | - | 75 | 80 | - | 17 | - | 80 |
| Single Product/Set Classification | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product |
| Shaft type | Square | Round | Round | Round | Round | Round | Round |
| Magnet | - | NA | NA | NA | NA | NA | NA |
| Shaft through | - | NA | NA | NA | NA | NA | NA |
| Bolster | - | NA | NA | NA | NA | NA | NA |
| Grip Type | - | Resin | Rubber | Resin | Resin | Resin | Rubber |
| Tip size / flathead (-) blade thickness (mm) B2 | 0.3 ～ 0.6 | 0.35 | 0.4 | 0.4 | 0.4 | 0.35 ～ 0.7 | 0.4 ～ 0.5 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- ENGINEER (7)
- HOZAN (7)
- TRUSCO NAKAYAMA (7)
- WERA (7)
- VESSEL (6)
- ANEX (4)
- PB SWISS TOOLS (4)
- TONE (2)
- WIHA (2)
- FUJIYA (1)
- HIRAI KOGU (1)
- KTC(KYOTO TOOL) (1)
- TRAD (1)
- SUNFLAG (0)
- ARC (0)
- HANDIWORK (0)
- MITOLOY (0)
- E VALUE (0)
- HIOS (0)
- SMATO (0)
- SIGNET (0)
- SUEKAGE TOOL (0)
- TOP (0)
- AS ONE (0)
- ESCO (0)
- BONDHUS (0)
- SK 11 (0)
- HAZET (0)
- KO-KEN TOOL (0)
- EIGHT TOOL (0)
- WILLIAMS (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy