(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
DAIWARASHI Adjuster Bolt（Thread Material：Stainless Steel）
| Days to Ship |
|
|---|
-
DAIWARASHI
An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
[Features]
· Since the rubber part comes in contact with the floor, floor damage is prevented.
· A light vibration-proof type adjustment bolt.
· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
· A nylon washer is used between the receiver and bolt, and rotation is smooth.
· The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
· The SI type is white and is characterized by hardly leaving traces of rubber.
· Suitable for office equipment, etc.- CAD ：
- 2D
Standard Price: MYR 48.93- Days to Ship: 4 Day(s) or more -
Adjuster for Heavy Weights D-C/D-C, S
DAIWARASHI
A standard type adjuster for heavy loads
[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.- CAD ：
- 2D
Standard Price: MYR 94.90- Days to Ship: 4 Day(s) or more -
Standard Receiver Type Adjuster D-A/D-B
DAIWARASHI
The most general standard type adjuster
[Features]
· The screw shaft rotates and tilts somewhat.
· A standard type that can be used as the adjustment bolt for any machinery.
· The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
· D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.- CAD ：
- 2D
Standard Price: MYR 49.32- Days to Ship: 4 Day(s) or more -
Adjuster for Heavy Weight, With Rubber D-C-R
DAIWARASHI
A rubber equipped type adjuster for medium loads
[Features]
· Receiver features a chloroprene rubber coating.- CAD ：
- 2D
Standard Price: MYR 111.76- Days to Ship: 4 Day(s) or more -
Adjuster for Heavy Weights (Wide Base Plate Type), D-CIII/D-CIII and S/D-CIII-W
DAIWARASHI
A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
[Features]
· The receiver of the stainless steel D-C III is a forged item.
· D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- CAD ：
- 2D
Standard Price: MYR 180.93- Days to Ship: 4 Day(s) or more -
Adjuster for Anchor Fixing D-EII/D-EII-ST
DAIWARASHI
A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
[Features]
· Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
· Can easily be fixed using an anchor bolt.
· Please use an anchor bolt.
· Please use a 12 mm anchor bolt.
· Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
· Note: The screw rotates and tilts somewhat.- CAD ：
- 2D
Standard Price: MYR 83.66- Days to Ship: 4 Day(s) or more -
Adjuster for Heavy Loads (Bearing Equipped) D-H
DAIWARASHI
An adjuster for heavy weights with a built-in thrust bearing
[Features]
· Suitable for the adjustment of heavy machinery.
· Stability is outstanding since a large diameter bolt is used.
· Smooth adjustments can be made even for non-heavy machinery.- CAD ：
- 2D
Standard Price: MYR 466.42 Days to Ship: 4 Day(s) or more -
Adjuster for Heavy Weights (Long Screw Type), D-C-L/D-C-L and S
DAIWARASHI
A long screw adjuster with a wide adjustment range
[Features]
· Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
A limited quantity of 500 mm total length products are available for M16 and M20.
· D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- CAD ：
- 2D
Standard Price: MYR 139.85- Days to Ship: 4 Day(s) or more -
Standard Receiver Adjuster With Plastic D-AII/D-BII
DAIWARASHI
A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
[Features]
· Does not stain or damage floors since a special plastic is molded into the receiver.
· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
· Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.- CAD ：
- 2D
Standard Price: MYR 44.50- Days to Ship: 4 Day(s) or more -
Adjuster, Anchor Fixing, With Non-Shake Thread Section, D-J-EII
DAIWARASHI
An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- CAD ：
- 2D
Standard Price: MYR 134.24 Days to Ship: 4 Day(s) or more -
Adjuster, Standard Receiver, Small Diameter Type D-F/D-F-C
DAIWARASHI
An adjuster whose screw and base have small diameters
[Features]
· Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
· Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
· A light load type with a receiver diameter that is also small.
· Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.- CAD ：
- 2D
Standard Price: MYR 30.22- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Thread Length L1(mm) |
| Nominal of Thread M(mm) |
| Type |
| Main Body Height E(mm) |
| Adjusting Bolt Shape Type |
| Body Material |
| Properties |
| Bottom Rubber Material |
| Mounting Shape Type |
| Thread Material |
| Main Body Surface Treatment |
| Swivel Angle θ(deg) |
| Height Adjusting Handle |
| Thread Surface Treatment |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
|
|
| |
| Brand | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI |
| Product Series | Adjuster for Heavy Weights (Wide Base Plate Type), D-CIII/D-CIII and S/D-CIII-W | Adjuster for Heavy Weights (Long Screw Type), D-C-L/D-C-L and S | Adjuster, Anchor Fixing, With Non-Shake Thread Section, D-J-EII | ||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Thread Length L1(mm) | 50 ～ 180 | 50 ～ 200 | 75 ～ 200 | 100 ～ 200 | 130 ～ 200 | 50 ～ 200 | 150 | 200 ～ 300 | 100 ～ 180 | 100 | 50 ～ 100 |
| Nominal of Thread M(mm) | 8 ～ 20 | 12 ～ 20 | 12 ～ 20 | 12 ～ 20 | 16 ～ 24 | 12 ～ 16 | 24 | 12 ～ 24 | 12 ～ 16 | 12 | 8 ～ 10 |
| Type | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt |
| Main Body Height E(mm) | 13 ～ 17 | 17 | 15 ～ 18 | 22 | 22 | 17 | 31.5 | 17 ～ 22 | 18 ～ 22 | 17 | 12.5 ～ 13.5 |
| Adjusting Bolt Shape Type | Rubber Foot Type | Standard | Standard | Rubber Foot Type | Standard | Rubber Foot & Anchor Bolt Fixing Type | Built-in Bearing Type | Standard | Standard | Rubber Foot & Anchor Bolt Fixing Type | Standard |
| Body Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Properties | Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Corrosion Resistance / Vibration Control | Standard / Corrosion Resistance |
| Bottom Rubber Material | Chloroprene Rubber / Ethylene Propylene Rubber / Silicon | - | - | Chloroprene Rubber | - | - | - | - | ABS Resin | - | ABS Resin |
| Mounting Shape Type | - | - | - | - | - | - | - | - | - | - | - |
| Thread Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Main Body Surface Treatment | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others |
| Swivel Angle θ(deg) | - | - | - | - | - | - | - | - | - | - | - |
| Height Adjusting Handle | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Surface Treatment | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others | Others |
| Swivel Mechanism | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Configure
Specification/Dimensions
-
Thread Length L1(mm)
- 9
- 11.5
- 11.6
- 14
- 16
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 39.5
- 40
- 41
- 42
- 43
- 45
- 49.5
- 50
- 51
- 51.5
- 52
- 52.5
- 53
- 54
- 56
- 58
- 59.5
- 60
- 61
- 62
- 63
- 65
- 66
- 67.5
- 68
- 69.5
- 70
- 71
- 71.5
- 72
- 73
- 75
- 78
- 80
- 85
- 90
- 91
- 95
- 98
- 99.5
- 100
- 101.5
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 250
- 280
- 300
-
Nominal of Thread M(mm)
-
Type
- Adjusting Bolt
- Mounting
- Precision Instrument
- Others
- Adjusting Screw with Rubber Grommet
-
Main Body Height E(mm)
- 4
- 5
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.8
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 22
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 34.5
- 35
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 43
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 60
- 61
- 62
- 62.5
- 63
- 64
- 64.5
- 65
- 66
- 67
- 67.5
- 69
- 70
- 72
- 73
- 74.5
- 75
- 76
- 77
- 77.5
- 78.5
- 79
- 80
- 81
- 81.5
- 82.5
- 83
- 84.5
- 85
- 90
- 91
- 92
- 93
- 95
- 97
- 98.5
- 100
- 101
- 101.5
- 103
- 104
- 104.5
- 105
- 106
- 107
- 108
- 108.5
- 110
- 112
- 112.5
- 114.5
- 115
- 116
- 117
- 117.5
- 118.5
- 119
- 121.5
- 123
- 124
- 125
- 126
- 127
- 128
- 128.5
- 130
- 131
- 132
- 132.5
- 134
- 135
- 136
- 137
- 138
- 139
- 139.5
- 140
- 143
- 145
- 147
- 148
- 150
- 150.5
- 151
- 152
- 152.5
- 153
- 153.5
- 154
- 156
- 156.5
- 157
- 158
- 158.5
- 159
- 159.5
- 160
- 160.5
- 161
- 161.5
- 162
- 163
- 166.5
- 170
- 173
- 175
- 176
- 177
- 178
- 180
- 180.5
- 181
- 182.5
- 183
- 183.5
- 184
- 186
- 186.5
- 188
- 188.5
- 189
- 189.5
- 190
- 190.5
- 191.5
- 192
- 193
- 193.5
- 195
- 195.5
- 196.5
- 200
- 207
- 208
- 210
- 211
- 214
- 216
- 216.5
- 220
- 222
- 225
- 225.5
- 227
- 228
- 230
- 230.5
- 231
- 232.5
- 233
- 233.5
- 234
- 236
- 236.5
- 238
- 238.5
- 240
- 240.5
- 241.5
- 242
- 243
- 243.5
- 245
- 245.5
- 246.5
- 250
- 281
- 330
- 400
- 500
- 600
-
Adjusting Bolt Shape Type
-
Body Material
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistance
- Electrical Conductivity
-
Bottom Rubber Material
-
Mounting Shape Type
-
Thread Material
-
Main Body Surface Treatment
-
Swivel Angle θ(deg)
-
Height Adjusting Handle
-
Thread Surface Treatment
-
Swivel Mechanism
Narrow search by specifying Manufacturer
-
- MISUMI (24)
- IMAO (17)
- NABEYA (16)
- DAIWARASHI (11)
- TAKIGEN (9)
- TRUSCO NAKAYAMA (3)
- NABEYA BI-TECH (2)
- RICHENGINEERING (0)
- HIKARI (0)
- GIFUSANKENKOGYO (0)
- IWATA MFG (0)
- YAHATA (0)
- NANSIN (0)
- KURASHIKI KAKO (0)
- OHNISHI MFG (0)
- OHNORUBBER (0)
- SUN FASTENER (0)
- Jmec (0)
- WAKISANGYO (0)
CAD
-
- 2D
- 3D
Related Categories to Adjuster Bolt
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy