(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
DAISHOWASEIKI Holding Tools for I.D. Tuning（Application：Internal Diameter）
| Days to Ship |
|
|---|
-
SW Boring Head (Rough Highly Rigid Type)
DAISHOWASEIKI
[Applications]It can be used for dual contact BBT/BT shanks. [Features]It is a high stiffness type for roughing and can also be used for processing flat bearing surfaces.
Standard Price: MYR 1,396.68- Days to Ship: 11 Day(s) -
EWN Boring Head Set (For Finishing / Insert Holder Type)
DAISHOWASEIKI
[Features]
·A 1 micron vernier is added to the easy-to-read scale of 0.01 mm/⌀.
·The pre-balanced design achieves stable machining accuracy.
·Back boring can be standardized, expanding the range of use.Standard Price: MYR 3,042.58- Days to Ship: 9 Day(s) or more -
Insert Holder For EWN Boring Head Replacement
DAISHOWASEIKI
[Features]
Combining the head and insert holder makes it possible to secure a cutting chip pocket.
Designed for improved cutting chip discharge.
For EWN head- CAD ：
- 2D
Standard Price: MYR 410.03- Days to Ship: 9 Day(s) or more -
EWN Boring Head Set (For Finishing / Round Bit Type)
DAISHOWASEIKI
[Features]
·A series of 3 types that allow you to choose the head suitable for processing.
·The micron-adjustable ultra-precision head enables difficult small-diameter boring.
·With a full lineup of carbide bit series, it is possible to quickly handle small-diameter deep hole drilling.Standard Price: MYR 3,830.93- Days to Ship: 10 Day(s) -
SW Cartridge (E-type for Blind Holes)
DAISHOWASEIKI
[Applications]It can be used for dual contact BBT/BT shanks. [Features]Balance cut and step cut can be supported simply by replacing the standard cartridge.
Standard Price: MYR 1,291.81- Days to Ship: 11 Day(s) or more -
Insert Holder For CK Boring System Clearance Machining
DAISHOWASEIKI
[Features]
· Insert holder which can perform boring and grooving machining (clearance machining).- CAD ：
- 2D
Standard Price: MYR 874.01- Days to Ship: 11 Day(s) -
EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)
DAISHOWASEIKI
[Features]
· With excellent dynamic balance, it achieves high-speed processing and stable precision.
· Automatic balance compensation.
· Accurate φ0.01 mm unit scale ultra-precision head.- CAD ：
- 2D
Standard Price: MYR 5,271.96- Days to Ship: 11 Day(s) -
EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In)
DAISHOWASEIKI
[Features]
· The internal weight can be adjusted manually by turning the balance ring.
· Manual balance adjustment mechanism. 5 μm/φ scale precision diameter adjustment mechanism (EWB2-50 only).Standard Price: MYR 6,989.48- Days to Ship: 11 Day(s) -
DAISHOWASEIKI
[Features]
· Microminiaturized, using the popular φ0.01 mm scale adjustment mechanism.
· Adjustment with only micro-quill eccentricity preserves high speed capability.
· Carbide solid straight shank enables high-rigidity machining.- CAD ：
- 2D
Standard Price: MYR 4,551.95- Days to Ship: 11 Day(s) -
RW Cartridge (for Through Holes) Cartridge Body
DAISHOWASEIKI
Well-balanced cut using 2 sheets enables heavy-duty cutting. 4 corners of the insert can be used. For roughing (for through holes).
- CAD ：
- 2D
Standard Price: MYR 620.34- Days to Ship: 9 Day(s) or more -
RW Cartridge (for Blind Holes) Cartridge Body
DAISHOWASEIKI
[Applications]It can be used for inner surface machining and can be used for dual contact BBT/BT shanks. [Features]80° two-bolt insert 2 corners can be used.
- CAD ：
- 2D
Standard Price: MYR 620.34- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 737.36- Days to Ship: 7 Day(s) -
SW Cartridge (A-type for Through Holes)
DAISHOWASEIKI
[Features]
An SW cartridge for the CK boring system, type A for through holes.
4 corners of inserts can be used.
Please check the compatibility before ordering.Standard Price: MYR 1,291.81- Days to Ship: 8 Day(s) or more -
TW Cartridge (E-type for Blind Holes)
DAISHOWASEIKI
[Features]
A boring head TW cartridge, type E for blind holes.
2 corners of 80-degree diamond inserts can be used.
Please check the compatibility before ordering.Standard Price: MYR 859.44 Days to Ship: 4 Day(s) or more -
TW Boring Head (For Finishing/Round Bit Type)
DAISHOWASEIKI
High-rigidity type for roughing. Center through.
Standard Price: MYR 1,046.97 Days to Ship: 8 Day(s) -
BBT/BT Shank CK Boring System MW Boring Head (For Roughing)
DAISHOWASEIKI
[Features]
· High efficiency machining with 2 blade small diameter rough boring.
· Uses general purpose ø20 shank.- CAD ：
- 2D
Standard Price: MYR 1,638.63- Days to Ship: 11 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Applicable Tip Shape |
| Minimum Processing Diameter φA |
| Application |
| Selfishly |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank Diameter φD |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI |
| Product Series | EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In) | EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In) | ||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
| |||||||
| Days to Ship | 11 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 10 Day(s) | 11 Day(s) or more | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 7 Day(s) | 8 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 11 Day(s) |
| Applicable Tip Shape | - | T (Triangle) | T (Triangle) | - | C (80° Diamond-Shape) / D (55° Diamond-Shape) | - | T (Triangle) | T (Triangle) | W (Hexagonal Type) | S (Rectangular) | C (80° Diamond-Shape) | - | C (80° Diamond-Shape) | C (80° Diamond-Shape) | - | - |
| Minimum Processing Diameter φA | 20 ～ 148 | 20 ～ 100 | 20 ～ 118 | 1 | 20 ～ 175 | - | 32 ～ 85 | 1 | 15 ～ 18 | 25 ～ 125 | 25 ～ 125 | 25 ～ 100 | 20 ～ 175 | 25 | 20 | - |
| Application | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter |
| Selfishly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Clamp Shape | - | - | Screw-on | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length L1 | - | - | - | - | - | - | - | - | 144 ～ 204 | - | - | - | - | - | - | - |
| Clearance angle | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank Diameter φD | - | - | - | - | - | - | - | 50 ～ 63.5 | 14 ～ 16 | - | - | - | - | - | - | ø20 mm |
| Protrusion length (L/D) | - | - | - | - | - | - | - | - | 100 ～ 160 | - | - | - | - | - | - | - |
| Lubrication Hole Y/N | Available | Available | - | Available | NA | - | Available | Available | Available | NA | NA | Available | NA | NA | Available | - |
Loading...
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Minimum Processing Diameter φA
- 0.3
- 0.4
- 0.5
- 0.6
- 0.9
- 1
- 1.5
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 4.5
- 5
- 5.0 mm
- 5.2
- 5.5
- 6
- 6.0 mm
- 6.2
- 6.5
- 7
- 7.2
- 7.5
- 8
- 8.0 mm
- 8.5
- 9
- 10
- 10.0 mm
- 11
- 12
- 12.0 mm
- 13
- 14
- 14.0 mm
- 14 mm
- 15
- 16
- 16 mm
- 17
- 18
- 18.0 mm
- 19
- 20
- 20 mm
- 20 mm
- 20/30
- 22
- 23
- 25
- 25 mm
- ø25
- 25/37
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 32 mm
- ø32
- 33
- 33 mm
- 34
- 35
- 37
- 38
- 39
- 40
- 40/55
- 41
- 41.5
- 43
- 44
- ø44
- 45
- 46
- 48
- 50
- 50 mm
- 50/75
- 51
- 52
- 53
- 54
- 55
- 56
- 60
- 60/75
- 61
- 62
- ø62
- 63
- 65
- 66
- 68
- 69
- 70
- 70/90
- 72
- 78
- 83
- 85
- 86
- 88
- ø88
- 90
- 94
- 98
- 99
- 100
- 105
- 106
- 118
- 123
- 125
- ø125
- 130
- 136
- 148
- 150
- 175
-
Application
- Internal Diameter
- Inner diameter profiling
- Pull
-
Selfishly
- Right-hand
- Left-hand
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Other
-
Overall Length L1
-
Clearance angle
- 5°
- 7°
- 20°
- 0°
- 11°
-
Shank Diameter φD
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Narrow search by specifying Manufacturer
-
- SANDVIK (184)
- SUMITOMO_ELEC_ (53)
- KYOCERA (43)
- DAISHOWASEIKI (16)
- NGK SPARK PLUG (9)
- MANYO TOOLS (4)
- SHOWA TOOL (0)
- THE_CUT (0)
CAD
-
- 2D
- 3D
Related Categories to Holding Tools for I.D. Tuning
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy