(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
CK_KINZOKU Screw Fittings, Screw-In Type Flanges（Applicable Fluid：Air）
| Days to Ship |
|
|---|
-
Ck Fitting Threaded Transportable Cast Iron Pipe Fittings Elbow
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
[Features]
·The appearance is exactly the same as the conventional product.
· Made in Japan.
[Applications]
·Ideal for 90° bends in white piping.Standard Price: MYR 14.75- Days to Ship: 7 Day(s) or more -
CK Pre-Seal SUS Fitting Hexagon Nipple
CK_KINZOKU
[Features]
・ The "galling" phenomenon when threaded is drastically reduced
・ Light threaded torque
・ Cost-effective and hassle free with no need to apply expensive seal
・ Prevents mixing of seal
・ Angle adjustment is also possible after screw installation
・ Also compatible with food. Also compatible with steam piping. Compatible with various pipingStandard Price: MYR 35.15- Days to Ship: 4 Day(s) or more -
Pressure Pipe Exterior Cladding 20 K Fitting Tee
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·The socket sleeve is made long and completely wraps around the tube sheath. The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to insulate electrically.
·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
·There is no need to wrap caulking tape around the body of the fitting or where it connects to the pipe, which speeds up the installation of pipes.
·Since vinyl chloride is not used in the resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For branching of buried pressure piping.Standard Price: MYR 966.30- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
[Features]
・ The "galling" phenomenon when threaded is drastically reduced
・ Light threaded torque
・ Cost-effective and hassle free with no need to apply expensive seal
・ Prevents mixing of seal
・ Angle adjustment is also possible after screw installation
・ Also compatible with food. Also compatible with steam piping. Compatible with various pipingStandard Price: MYR 94.57- Days to Ship: 9 Day(s) or more -
CK Pre-Seal SUS Fittings - Bushing
CK_KINZOKU
[Features]
・ The "galling" phenomenon when threaded is drastically reduced
・ Light threaded torque
・ Cost-effective and hassle free with no need to apply expensive seal
・ Prevents mixing of seal
・ Angle adjustment is also possible after screw installation
・ Also compatible with food. Also compatible with steam piping. Compatible with various pipingStandard Price: MYR 34.81- Days to Ship: 4 Day(s) or more -
Pre-Seal e white Fitting Elbow
CK_KINZOKU
[Features]
・ Eliminates the need to apply seal
・ The threaded torque has become lighter
・ Compatible with all standards
・ Ideal for rolling threads
・ Eco-friendly materialStandard Price: MYR 19.10- Days to Ship: 4 Day(s) or more -
CK_KINZOKU
[Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality
Standard Price: MYR 25.15- Days to Ship: 13 Day(s) or more -
Pre-Seal e white Fitting Cross
CK_KINZOKU
[Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality
Standard Price: MYR 60.59- Days to Ship: 13 Day(s) or more -
Pre-Seal e white Fitting Socket
CK_KINZOKU
[Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality
Standard Price: MYR 23.13- Days to Ship: 7 Day(s) or more -
Pre-Seal e white Fitting Flange Union
CK_KINZOKU
[Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality
Standard Price: MYR 104.06- Days to Ship: 13 Day(s) or more -
Pre-Seal e white Fitting Union
CK_KINZOKU
[Features]
·Eliminates the need to apply sealant.
·Lighter screwing torque.
·Compatible with all standards.
·Ideal for rolling screws.
·It is an environmentally friendly material.Standard Price: MYR 47.34- Days to Ship: 13 Day(s) or more -
Pre-Seal E-white Fitting Three-way Reducer Tee
CK_KINZOKU
[Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality
Standard Price: MYR 40.85- Days to Ship: 13 Day(s) or more -
Pre-Seal e white Fitting Reducer Elbow
CK_KINZOKU
[Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality
Standard Price: MYR 27.26- Days to Ship: 13 Day(s) or more -
Pre-Seal e white Fitting Reducer Tee
CK_KINZOKU
[Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality
Standard Price: MYR 32.83- Days to Ship: 13 Day(s) or more -
Pre-Seal e white Fitting Reducer Socket
CK_KINZOKU
[Features]
·Eliminates the need to apply sealant.
·Lighter screwing torque.
·Compatible with all standards.
·Ideal for rolling screws.
·It is an environmentally friendly material.Standard Price: MYR 30.81- Days to Ship: 4 Day(s) or more -
Pre-Seal e white Fitting Square Reducer Cross
CK_KINZOKU
[Features]
·Eliminates the need to apply sealant.
·Lighter screwing torque.
·Not only machined screws, but also rolled screw pipes with excellent earthquake resistance are available.
·It is an environmentally friendly material.
[Applications]
·Ideal for rolling screws.Standard Price: MYR 114.37- Days to Ship: 7 Day(s) or more -
Pre-Seal 20k Fitting Normal Type (for Fire Extinguishing Pipe) Elbow
CK_KINZOKU
[Features]
·Eliminates the need to apply sealant.
·Light screwing torque.
·The screws do not rust.Standard Price: MYR 62.12- Days to Ship: 13 Day(s) or more -
Pre-Seal 20k Fitting Normal Type (for Fire Extinguishing Pipe) Tee
CK_KINZOKU
[Features]·Easy installation with pre seal 20K fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality
Standard Price: MYR 374.96- Days to Ship: 13 Day(s) or more -
Pre-Seal 20k Fitting Normal Type (for Fire Extinguishing Pipe) Socket
CK_KINZOKU
[Features]
·The same price list as conventional products is applied.
·No leakage.
·Lighter screwing torque.
·Compatible with all standards.
·We have a wide range of products up to large diameters.
·Excess screws can be managed.
·Received the Good Design Award.
·It is an environmentally friendly material.
·The rubber ring will not twist.Standard Price: MYR 116.48- Days to Ship: 13 Day(s) or more -
Pre-Seal 20k Fitting Normal Type (for Fire Extinguishing Pipe) Reducer Tee
CK_KINZOKU
[Features]
·Eliminates the need to apply sealant.
·Light screwing torque.
·The screws do not rust.Standard Price: MYR 482.44- Days to Ship: 13 Day(s) or more -
Pre-Seal 20k Fitting Normal Type (for Fire Extinguishing Pipe) Reducer Socket
CK_KINZOKU
[Features]·Easy installation with pre seal 20K fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality
Standard Price: MYR 127.95- Days to Ship: 13 Day(s) or more -
Pre-Seal HB Gold Underground Type (Exterior Transparent Coating for Fire Extinguishing Pipes) Elbow
CK_KINZOKU
Buried transparent joint with seal for fire extinguishing pressure piping.
[Features]
·Eliminates the need to apply sealant.
·Light screwing torque.
·Since the seal material covers the threads, the threads do not rust.
·Attachment of the rubber ring can be easily confirmed.
·Accurate construction is realized by managing excess screws.
·Made in Japan and won the GOOD DESIGN Award.
[Applications]
·For bends in STPG VS pipes.Standard Price: MYR 606.52- Days to Ship: 13 Day(s) or more -
Pre-Sealed HB Gold Buried Type (Fire Fighting Piping Outer Transparent Covering) 45° Elbow
CK_KINZOKU
Buried transparent joint with seal for fire extinguishing pressure piping.
[Features]
·Eliminates the need to apply sealant.
·Light screwing torque.
·Since the seal material covers the threads, the threads do not rust.
·Attachment of the rubber ring can be easily confirmed.
·Accurate construction is realized by managing excess screws.
·Made in Japan and won the GOOD DESIGN Award.
[Applications]
·For 45° bends in STPG VS pipes.Standard Price: MYR 1,056.49- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Transparent joint for buried fire extinguishing pressure piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Accurate construction is realized by managing excess screws.
·Made in Japan and won the GOOD DESIGN Award.
[Applications]
·For bends in STPG VS pipes.Standard Price: MYR 583.09- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Threaded fitting for fire extinguishing pressure piping.
[Features]
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·Ideal for bends in STPG pipes.Standard Price: MYR 62.12- Days to Ship: 7 Day(s) or more -
CK20K Screw-in Fitting 45° Elbow
CK_KINZOKU
Fittings for fire extinguishing pressure piping.
[Features]
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For 45° bends in STPG pipes.Standard Price: MYR 174.52- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Threaded fitting for fire extinguishing pressure piping.
[Features]
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·Ideal for removing branches from STPG pipes.Standard Price: MYR 374.96- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Fittings for fire extinguishing pressure piping.
[Features]
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For extension of STPG piping.Standard Price: MYR 116.48- Days to Ship: 13 Day(s) or more -
Ck 20 K Screw-in Fitting Tee with Different Diameters
CK_KINZOKU
Fittings for fire extinguishing pressure piping.
[Features]
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For removing branches from STPG VS pipes.Standard Price: MYR 482.44- Days to Ship: 13 Day(s) or more -
Ck 20 K Screw-in Fitting Socket with Different Diameters
CK_KINZOKU
Threaded fitting for fire extinguishing pressure piping.
[Features]
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·Ideal for size conversion of STPG piping.Standard Price: MYR 127.95- Days to Ship: 13 Day(s) or more -
Pressure Pipe Exterior Cladding 20 K Fitting Elbow
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·The socket sleeve is made long and completely wraps around the tube sheath. The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to insulate electrically.
·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
·There is no need to wrap caulking tape around the body of the fitting or where it connects to the pipe, which speeds up the installation of pipes.
·Since vinyl chloride is not used in the resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For bends in STPG VS pipes.Standard Price: MYR 606.52- Days to Ship: 13 Day(s) or more -
20 K Fittings with Outer Coating for Pressure Piping - Socket
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·The socket sleeve is made long and completely wraps around the tube sheath. The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to insulate electrically.
·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
·There is no need to wrap caulking tape around the body of the fitting or where it connects to the pipe, which speeds up the installation of pipes.
·Since vinyl chloride is not used in the resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For extension of buried pressure piping.Standard Price: MYR 490.76- Days to Ship: 13 Day(s) or more -
Pressure Pipe Exterior Cladding 20K Fitting 45° Elbow
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·Since vinyl chloride is not used in the outer resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For 45° bends in STPG VS pipes.Standard Price: MYR 1,056.49- Days to Ship: 13 Day(s) or more -
20 K Fittings with Outer Coating for Pressure Piping - Unequal Diameter Elbow
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·Vinyl chloride is not used in the outer resin, so it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For changing the bend size of STPG VS pipes.Standard Price: MYR 1,902.04 Days to Ship: 13 Day(s) or more -
Pressure Pipe Exterior Cladding 20 K Fitting Tee with Different Diameters
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·Vinyl chloride is not used in the outer resin, so it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For removing branches from STPG VS pipes.Standard Price: MYR 1,167.74- Days to Ship: 13 Day(s) or more -
20 K Fittings with Outer Coating for Pressure Piping - Reducing Socket
CK_KINZOKU
Buried joint for pressure piping.
[Features]
·Since vinyl chloride is not used in the outer resin, it can be recycled together with iron without separation.
·Certified by the Japan Fire Equipment Safety Center.
[Applications]
·For size conversion of STPG VS pipe piping.Standard Price: MYR 583.09- Days to Ship: 13 Day(s) or more -
20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Elbow
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For bends in STPG VS pipes.Standard Price: MYR 606.52- Days to Ship: 13 Day(s) or more -
20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Tee
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
[Applications]
·For removing branches from STPG VS pipes.Standard Price: MYR 966.30- Days to Ship: 13 Day(s) or more -
20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Socket
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For changing the size of STPG VS pipes.Standard Price: MYR 490.76- Days to Ship: 13 Day(s) or more -
CK_KINZOKU
Buried joint for fire extinguishing piping.
[Features]
·Attachment of the rubber ring can be easily confirmed.
·Correct construction is possible by managing extra screws.
·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
· Made in Japan.
·GOOD DESIGN award winning product.
[Applications]
·For size conversion of STPG VS pipe piping.Standard Price: MYR 583.09- Days to Ship: 13 Day(s) or more -
Ck Fitting Threaded Transportable Cast Iron Pipe Fittings 45° Elbow
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct fittings.
[Features]
·Conforms to JIS standards.
·The appearance is exactly the same as the conventional product.
· Made in Japan.
[Applications]
·For 45° bends in white piping.Standard Price: MYR 27.77- Days to Ship: 7 Day(s) or more -
Ck Fitting Threaded Transportable Cast Iron Pipe Fittings T
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct fittings.
[Features]
·Conforms to JIS standards.
·The appearance is exactly the same as the conventional product.
· Made in Japan.
[Applications]
·For removing branches from white pipes.Standard Price: MYR 23.21- Days to Ship: 7 Day(s) or more -
CK Fittings Threaded From Malleable Iron Pipe Fitting Cross
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
[Features]
·The appearance is exactly the same as the conventional product.
· Made in Japan.
[Applications]
·Ideal for branching white pipes in four directions.Standard Price: MYR 50.30- Days to Ship: 7 Day(s) or more -
CK Fittings, Screw-in Malleable Cast Iron Pipe Fittings, Cross
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct fittings.
[Features]
· Made in Japan.
[Applications]
·For extension of white piping.Standard Price: MYR 21.44- Days to Ship: 7 Day(s) or more -
CK Fittings, Screw-in Malleable Cast Iron Pipe Fittings, Elbow with Band
CK_KINZOKU
JIS standard (B2301 screw-in type malleable cast iron pipe fittings) correct threaded fittings.
[Features]
·The appearance is exactly the same as the conventional product.
· Made in Japan.
[Applications]
·Ideal for 90° bends in white piping.Standard Price: MYR 14.75- Days to Ship: 7 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Connecting Shape |
| Environmentally Friendly |
| Connection Type |
| Properties / applications |
| Material |
| Nominal of Thread M1 |
| Connection Thread Type M1 |
| Connection Thread Type M2 |
| Nominal of Thread M2 |
| Applicable Fluid |
| Type |
| Max. Operating Pressure(MPa) |
| Surface Treatment |
| Types of Screw 3 (When Different Dia. or Different Type Screw) |
| Nominal of Thread 3(Different Diameters or Different Type Screw) |
| Types of Screw 4 (When Different Dia. or Different Type Screw) |
| Nominal of Thread 4(Different Diameters or Different Type Screw) |
| Material Details |
| Divisions of Max. Operating Pressure |
| Related Part Type |
| Interior Resin Lining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU | CK_KINZOKU |
| Product Series | Ck Fitting Threaded Transportable Cast Iron Pipe Fittings Elbow | Pre-Seal 20k Fitting Normal Type (for Fire Extinguishing Pipe) Elbow | Pre-Seal 20k Fitting Normal Type (for Fire Extinguishing Pipe) Tee | Pre-Seal 20k Fitting Normal Type (for Fire Extinguishing Pipe) Socket | Pre-Seal 20k Fitting Normal Type (for Fire Extinguishing Pipe) Reducer Tee | Pre-Seal 20k Fitting Normal Type (for Fire Extinguishing Pipe) Reducer Socket | Pre-Seal HB Gold Underground Type (Exterior Transparent Coating for Fire Extinguishing Pipes) Elbow | Pre-Sealed HB Gold Buried Type (Fire Fighting Piping Outer Transparent Covering) 45° Elbow | 20 K Fittings with Outer Coating for Pressure Piping - Socket | 20 K Fittings with Outer Coating for Pressure Piping - Unequal Diameter Elbow | Pressure Pipe Exterior Cladding 20 K Fitting Tee with Different Diameters | 20 K Fittings with Outer Coating for Pressure Piping - Reducing Socket | 20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Elbow | 20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Tee | 20 K Transparent Fittings with Insulation for HB Gold (HBG) Fire Extinguishing Pipes - Socket | Ck Fitting Threaded Transportable Cast Iron Pipe Fittings 45° Elbow | CK Fittings, Screw-in Malleable Cast Iron Pipe Fittings, Cross | CK Fittings, Screw-in Malleable Cast Iron Pipe Fittings, Elbow with Band | |||||||||||||||||||||||||||
| Days to Ship | 7 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 7 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 7 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 13 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more |
| Connecting Shape | Elbow | Nipple | Tees | Male, Female Union | Bushings/Male Female Socket | Elbow | Tees | Cross | Socket | Flange | Male, Female Union | Tees | Elbow | Tees | Socket | Cross | Elbow | Tees | Socket | Tees | Socket | Elbow | Elbow | Socket | Elbow | Elbow | Tees | Socket | Tees | Socket | Elbow | Socket | Elbow | Elbow | Tees | Socket | Elbow | Tees | Socket | Socket | Elbow | Tees | Cross | Socket | Elbow |
| Environmentally Friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Connection Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Flange | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type | Thread <-> Thread, Equal Dia. Same Type |
| Properties / applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Cast Iron | Stainless Steel | Cast Iron | Stainless Steel | Stainless Steel | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron |
| Nominal of Thread M1 | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 2 1/2B(65A) / 4B(100A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1B(25A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3B(80A) / 4B(100A) | 3B(80A) / 4B(100A) | 1B(25A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3B(80A) / 4B(100A) | 4B(100A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) | 3B(80A) / 4B(100A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 2 1/2B(65A) / 4B(100A) | 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) | 3B(80A) / 4B(100A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) / 4B(100A) / 5B(125A) / 6B(150A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) |
| Connection Thread Type M1 | Rc | R | Rc | Rc | R | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc |
| Connection Thread Type M2 | - | - | - | - | Rc | - | - | - | - | - | - | Rc | - | Rc | Rc | - | - | - | - | Rc | Rc | - | - | Rc | - | - | - | - | Rc | Rc | - | - | - | - | Rc | Rc | - | - | - | Rc | - | - | - | - | - |
| Nominal of Thread M2 | - | - | - | - | 1/8B(6A) / 1/4B(8A) / 3/8B(10A) / 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | - | - | - | - | - | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | - | - | - | 1B(25A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 4B(100A) | - | - | 2 1/2B(65A) | - | - | - | - | 1B(25A) / 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 3B(80A) | 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) / 4B(100A) | - | - | - | 2 1/2B(65A) | 1B(25A) / 2 1/2B(65A) | 2 1/2B(65A) | - | - | - | 2 1/2B(65A) | - | - | - | - | - |
| Applicable Fluid | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air |
| Type | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting |
| Max. Operating Pressure(MPa) | 2.5 | 2 | 13.8 | 2 | 2 | - | - | - | - | - | - | - | - | - | - | - | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 1 | 1 | 1 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 13.8 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Surface Treatment | Not Provided / Zinc Plating | Not Provided | Resin Coating | Not Provided | Not Provided | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Resin Coating | Resin Coating | Resin Coating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Resin Coating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Zinc Plating |
| Types of Screw 3 (When Different Dia. or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | Rc | - | Rc | - | Rc | - | - | - | Rc | - | - | - | - | - | - | - | - | Rc | - | - | - | - | - | Rc | - | - | - | - | - | - | - | - | - | - |
| Nominal of Thread 3(Different Diameters or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | 1 1/2B(40A) ～ 3B(80A) | - | 1 1/2B(40A) ～ 4B(100A) | - | 1 1/2B(40A) ～ 3/4B(20A) | - | - | - | 2 1/2B(65A) ～ 5B(125A) | - | - | - | - | - | - | - | - | 2 1/2B(65A) ～ 5B(125A) | - | - | - | - | - | 2 1/2B(65A) ～ 4B(100A) | - | - | - | - | - | - | - | - | - | - |
| Types of Screw 4 (When Different Dia. or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Rc | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal of Thread 4(Different Diameters or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 1/2B(40A) ～ 3/4B(20A) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material Details | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Divisions of Max. Operating Pressure | than 2.0Mpa | 2.0Mpa or Less | than 2.0Mpa | 2.0Mpa or Less | 2.0Mpa or Less | - | - | - | - | - | - | - | - | - | - | - | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa |
| Related Part Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Interior Resin Lining | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No |
Loading...
Configure
Specification/Dimensions
-
Connecting Shape
-
Environmentally Friendly
-
Connection Type
- Thread <-> Thread, Equal Dia. Same Type
- Thread <-> Thread, Equal Dia. Different Type
- Thread <-> Thread, Unequal Dia.
- Thread <-> Steel Pipe
- Screws
- Flange
-
Properties / applications
-
Material
- Stainless Steel
- Steel
- Brass
- Aluminum
- Resin
- Bronze
- Cast Iron
-
Nominal of Thread M1
-
Connection Thread Type M1
-
Connection Thread Type M2
-
Nominal of Thread M2
-
Applicable Fluid
- Water
- Air
- Steam
- Gas
- Chemical
- Oil
- Not specified by Manufacturer
-
Type
- Fitting
- Related Products
-
Max. Operating Pressure(MPa)
-
Surface Treatment
- Not Provided
- Trivalent Chromate
- Chrome Plating
- Nickel Plating
- Zinc Plating
- Black Oxide
- Painted
- Resin Coating
- Polishing
- Zinc Electroplating
-
Types of Screw 3 (When Different Dia. or Different Type Screw)
-
Nominal of Thread 3(Different Diameters or Different Type Screw)
-
Types of Screw 4 (When Different Dia. or Different Type Screw)
-
Nominal of Thread 4(Different Diameters or Different Type Screw)
-
Material Details
-
Divisions of Max. Operating Pressure
- 1.0Mpa or Less
- 2.0Mpa or Less
- than 2.0Mpa
-
Related Part Type
- Valve
- Nut
- Hex Wrench
- Gasket
- Hydraulic Tester
-
Interior Resin Lining
- Presence
- No
Narrow search by specifying Manufacturer
-
- MISUMI (91)
- CK_KINZOKU (88)
- JFEPIPEFITTING (83)
- HITACHI KINZOKU (55)
- ONDASEISAKUSYO (53)
- YODOSHI (45)
- NAGOYA (35)
- RIKEN (35)
- ON INDUSTRIES (31)
- ASOH (23)
- MIETECHNO (23)
- KITZ (21)
- KOYO (14)
- TRUSCO NAKAYAMA (9)
- ESCO (8)
- KURITA (8)
- YAMATOSANKI (6)
- FLOBAL (5)
- EASUN (1)
- FLONCHEMICAL (1)
- MEIJIKIKAI (1)
- NABEYA BI-TECH (1)
- FESTO (0)
- TOYO FITTING (0)
- SEKISUI_ (0)
- IHARA SCIENCE (0)
- INOC (0)
- YAMATOTOKUSYUKO (0)
- SVF (0)
- FUJITOKU (0)
- OSAKATSUGITE (0)
- FUJIIKOUATU (0)
- MIYAKO (0)
CAD
-
- 2D
- 3D
Related Categories to Screw Fittings, Screw-In Type Flanges
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy