(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Adhesive
[What is an adhesive?]
The adhesive bonds the surface of the object to the surface, and is classified into types according to the hardening method and form.
(1) Classification by hardening method
Hot melt type, dry type, moisture hardening type, two-liquid reaction hardening type, UV hardening type, anaerobic type, etc
(2) Classification by form
Solid type, emulsion type (water-based), solvent type, solventless type etc. It is recommended to select the adhesive based on these classifications, after considering the condition of the adhesive surface (unevenness, etc.) and the combination of materials to be bonded.
Search by specifying the lower class category
Instant Adhesive
One Part Adhesive Type
Two Part Adhesive Type
Screw Locking Agents
Dispenser Type Adhesives
Adhesive
Pipe Sealants
For Urethane Foams
| Days to Ship |
|
|---|
-
Adapter Tube (with Stopper) for Syringes
MUSASHI_
Tube to connect dispensers and syringes to provide air pressure.
[Features]
· Material Adapter: polyacetal, tube: special elastomer resin, O-ring: fluorine rubber.
[Applications]
· Tube for dispenser.Standard Price: MYR 307.94 Days to Ship: 9 Day(s) -
High Performance ECO Dispenser, SMART SHOT
MUSASHI_
A dispenser that reduces power consumption by 1/2, increases accuracy greatly, and boasts incredible dispensing performance.
[Features]
· Equipped with discharge conditions setup function.
· A compact type with a lightweight design no more than 1/2 the conventional model.
· Reduces power consumption by half, lowering costs.
· Adopts a wide range dispensing timer.
· Discharge pressure digital display type available (SMART SHOTR MS-1D).
[Applications]
· Adhesion, potting, coating, sealing, filling, dotted coating, line drawing coating, etc.Standard Price: MYR 4,495.23- Days to Ship: 23 Day(s) or more -
ESCO
【Product Specifications】
・Versatile gel type instant adhesive blended by accelerator Super liquid.
・Content-4gStandard Price: MYR 67.57 Days to Ship: 10 Day(s) or more -
Clear Syringe with Gradation Capacity 10 ml
MUSASHI_
Syringe with outstanding fluid characteristics due to unique shape.
[Features]
· Resolves "breathing phenomenon" of plungers due to syringe inner diameter straight design.
· Silicone-free.
· Material: polypropylene (PP).
[Applications]
· Dispenser dedicated polypropylene container.Standard Price: MYR 377.35 Days to Ship: 9 Day(s) -
UV Block Syringe with Graduations Capacity (ml) 10/50
MUSASHI_
[Features]
· Completely shuts out UV.
· Improved transmissivity in the visible light region allows the remaining amount of liquid agent to be seen clearly.
[Applications]
· Polypropylene container dedicated for UV curable liquid materials.Standard Price: MYR 873.68 Days to Ship: 10 Day(s) -
MUSASHI_
Metal needle that uses a pin made of SUS and features outstanding durability.
[Features]
· Also supports discharge under high temperature conditions.
· Usable with solvent-based solutions and UV-based solutions.
· Material Needle: stainless steel (SUS304), needle base: brass (Ni plated).
[Applications]
· Needle to be attached to the syringe tip.Standard Price: MYR 82.32- Days to Ship: 9 Day(s) -
MUSASHI_
[Features]
· Cap to seal the syringe top.
[Applications]
· For storage or transportation with the solution packed.Standard Price: MYR 165.15- Days to Ship: 9 Day(s) -
Aron Alpha/Extra 2000 EA936C-2
ESCO
【Product Specifications】
・Low viscosity
・Colorless and transparent
・Available for bonding poorly adherent material (A-PET, EPDM, FRP, polyacetal, etc.), porous material (wood, leather, etc.).
・Adhere a surface even with clearance quickly.
・A hardened adhesive does not become clouded, and a finish is clear.
・Content…20gStandard Price: MYR 138.19 Days to Ship: 9 Day(s) or more -
ESCO
【Product Specifications】
・Low-viscosity type. Versatile applications such as the resin, metal, rubber.
・Content…20gStandard Price: MYR 129.00 Days to Ship: 5 Day(s) or more -
ESCO
【Product Specifications】
・Instant adhesive gel
・Cyanon acrylate
・This does not flow down when coating on a perpendicular surface.
・As this does not leak in, suitable for adhering in wood and porous material.
・Content…20gStandard Price: MYR 136.00 Days to Ship: 5 Day(s) or more -
Aron Alpha Dedicated Accelerator EA936CB-1
ESCO
【Product Specifications】
・Content-420ml
・For solidifying Aron Alpha quickly
・For a place full of clearances, filling, mounded adhesion
・For preventing a blanching phenomenon (periphery of adhesive goes white)
・Available for all types of Aron Alpha.Standard Price: MYR 206.05 Days to Ship: 5 Day(s) or more -
MUSASHI_
[Features]
· Cap to seal the syringe tip.
[Applications]
· For storage or transportation with the solution packed.Standard Price: MYR 119.06- Days to Ship: 9 Day(s) -
Adapter Tube O-Ring for Syringes
MUSASHI_
A replacement O-ring for tube adapters to connect a dispenser and a syringe and supply air pressure.
Standard Price: MYR 192.16 Days to Ship: 9 Day(s) -
No Solvent Type Sealant, Hermetic Seal
NIHON HERMETICS
[Features]
· Demonstrates a great sealing effect for cold water supply, hot water supply, oil, anti-freeze, fire extinguishing agent, etc.
· For steel pipe, the sealing effect is almost immediately exhibited.
[Applications]
· For sealing fire extinguisher pipes and air conditioning pipes.
· For large-diameter piping.Standard Price: MYR 310.27 Days to Ship: 4 Day(s) or more -
Dispenser for 30/50ml EA934WF-50
ESCO
【Product Specifications】
・Usable as 30/50ml cartridge
・For EA934WD-50A, (old model)EA934WE-50A, EA934DM-10 to -14.Standard Price: MYR 444.64 Days to Ship: 9 Day(s) or more -
![[Impact-resistant] Instant adhesive EA936A-9](//my.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007618975.jpg?$product_view_b$)
[Impact-resistant] Instant adhesive EA936A-9
ESCO
【Product Specifications】
・Medium viscosity
・Colorless and transparent
・Ultra quick hardening. For adhering in metal, ceramic, plastics, synthetic rubber, and for motor and surrounding, metal components, sport goods.
・Material-Cyanon acrylate resin
・Content-20gStandard Price: MYR 102.49 Days to Ship: 9 Day(s) or more -
ESCO
【Product Specifications】
・Low-viscosity type. Versatile applications such as the resin, metal, rubber.
・Content…2g x 5 pcsStandard Price: MYR 129.00 Days to Ship: 7 Day(s) or more -
MUSASHI_
Plunger that completely discharges the solvent inside the syringe and reduces solvent cost.
[Features]
· The dual wipe structure ensures thorough cleaning of liquids.
· Material: polyethylene (PE).
[Applications]
· Syringe-dedicated plunger which will be inserted in a syringe containing liquid to fully discharge it with high precision.Standard Price: MYR 297.00 Days to Ship: 9 Day(s) -
Double Thread Screw Plastic Needle
MUSASHI_
A double threaded plastic needle that enables safe and reliable syringe attachment.
[Features]
·The large four-blade design ensures secure screwing into the syringe.
·The needle size can be identified by the color of the needle base.
·Material Needle: Stainless steel (SUS304), needle base: Polypropylene (PP).
[Applications]
·A needle attached to the tip of the syringe.Standard Price: MYR 306.74- Days to Ship: 9 Day(s) -
fluoropolymer Tube for Tubing Dispenser
MUSASHI_
Fluid sending tube for tubing dispenser during fluid discharge.
[Features]
· Available in a wide variety according to the viscosity and discharge rate of liquid material to be discharged.
· Material: PTFE.
[Applications]
· fluoropolymer tube for tubing dispenser.Standard Price: MYR 313.54 Days to Ship: 10 Day(s) -
Metal Piping Flange Sealant (Loctite)
AS ONE
[Features]
· Sealant for metal piping solves leakage problems due to tearing seal tapes and thinning solvent types.
· Once a metal flange is attached, the flange sealant begins hardening and provides a secure seal.Standard Price: MYR 113.93 Days to Ship: 5 Day(s) or more -
HERMETIC, FII-V, Anti-Corrosive Sealant
SANNOUKOUGYOU
[Features]
· Anticorrosive Sealant for Lining Steel Pipe
· Water supply, HVAC, steam (up to 150°C)
[Applications]
· Screw section corrosion proofing and sealant for piping iron pipes
· For preventing water supply corrosionStandard Price: MYR 4,195.63- Days to Ship: 12 Day(s) or more -
HERMETIC, F-III, Anti-Corrosive Sealant
SANNOUKOUGYOU
[Features]
· Sick Building Syndrome Countermeasure Product
· Anti-corrosive and sealing agents for thread parts of various piping materials (iron pipe/SUS pipe/gunmetal/copper pipe/PVC pipe, etc.).
· Steam piping (iron pipes are heat resistant up to 200°C, SUS pipes are heat resistant up to 150°C).
· In a special laminated tube so that every last bit can be used.
· Solvent-free type
· With nozzleStandard Price: MYR 2,116.85 Days to Ship: 8 Day(s) or more -
HERMETIC, F-Z, Anti-Corrosive Sealant
SANNOUKOUGYOU
[Features]
· Anticorrosive Sealant for Lining Steel Pipe, Sick Building Syndrome Countermeasure Product
· Organic solvent type liquid anti-corrosion sealant for various lining steel pipe/anti-corrosion joints/steel pipes.
· It is an organic solvent type liquid anticorrosion sealant for water and hot water supply piping that can also be used for repairing scratches on pipe end faces, threads and pipes.
· Absolutely free from ingredients which are not authorized by the VOC (volatile organic compounds) guidelines of the WHO (World Health Organization).
[Applications]
· Screw section corrosion proofing and sealant for piping iron pipes.
· For preventing water supply corrosionStandard Price: MYR 4,195.63 Days to Ship: 12 Day(s) or more -
SANNOUKOUGYOU
[Features]
· Anti-corrosive Sealing Agent for Gas Pipes and Lining Pipes
· Tests done for salt water resistance and anti-corrosion performanceStandard Price: MYR 5,296.83- Days to Ship: 12 Day(s) or more -
HERMETIC, General Pipe Sealant
SANNOUKOUGYOU
[Features]
· General dry type anticorrosive sealing agent for steel pipes and lining pipesStandard Price: MYR 4,195.63- Days to Ship: 12 Day(s) or more -
AS ONE
[Features]
· Hardening starts after 5 minutes and is nearly complete in 15 minutes. For actual use, it takes about 40 minutes. Full curing takes one full day.Standard Price: MYR 97.76 Days to Ship: 9 Day(s) -
Ultraviolet Curing FRP Sheet E-Sheet Quick
SANKO_
[Features]
· With reduced odor, it can be used without concerns even indoors.
· It is an environmentally friendly non-styrene type.
· It is cured quickly by simply being exposed to ultraviolet rays.
· Complies with the Food Sanitation Act of Japan for appliance and container packaging standards.
· It is compatible with the water supply concrete tank inner surface FRP lining materials.
[Applications]
· Repair of plastic products, such as automobile parts, repair of wet areas in residences, etc.Standard Price: MYR 82.02- Days to Ship: 10 Day(s) -
Gun for Foamed Urethane Foam EA930TC-10
ESCO
【Product Specifications】
・For EA930TC-12 and old model EA930TC-11
・Adjusting screw allows discharge volume adjustment.
・Repeatedly operable
・After use, clean with the cleaner (EA930TC-16).Standard Price: MYR 1,028.87 Days to Ship: 5 Day(s) or more -
ESCO
【Product Specifications】
・For prevention of dew condensation around sash, refilling of pipe hole, repair of chipped insulation
・Content-750ml
・Foam volume-Approx. 38L
・Use upside down.
・Foam color-Pink
・Non-CFC
・Always use this along with the dedicated gun (EA930TC-10).
・Heat-proof temperature…-40 to 90℃Standard Price: MYR 250.86 Days to Ship: 5 Day(s) or more -
Cleaner for Urethane Foam Gun EA930TC-16
ESCO
【Product Specifications】
・For daily gun maintenance and cleaning off foam before hardening
・For cleaning off urethane adhering on a gun after use (Hardened urethane cannot be cleaned off.)
・Content-500ml
・For EA930TC-10Standard Price: MYR 208.52 Days to Ship: 5 Day(s) or more -
Thread locking adhesive EA933AC-12
ESCO
【Product Specifications】
・Red
・Content-50ml
・Anaerobic adhesive
・For permanently securing
・For securing and sealing up to M25 studs, bolts, nuts
・Excellent vibration, impact, chemical resistance.
・Service temperature：-55 to 150℃
・Weight - 82g
・CureTime…60 Minute
・Strength separate …32 NmStandard Price: MYR 200.29 Days to Ship: 9 Day(s) or more -
Thread Locking Adhesive (Liquid Type) EA933AC-13
ESCO
【Product Specifications】
・Red
・Content-50ml
・Anaerobic adhesive
・Permanently fixed type
・Available for inert objects such as stainless steel and plating surface
・Service temperature--55 to 180℃
・Weight - 78g
・Cure Time…20 Minute
・Strength separate…33 NmStandard Price: MYR 200.20 Days to Ship: 5 Day(s) or more -
Thread Locking Adhesive EA933AC-2
ESCO
【Product Specifications】
・Purple
・Content-50ml
・Anaerobic adhesive
・Detachable
・As a seal of small screw.
・Service temperature： -55 to 150℃
・Cure Time…25 Minute
・Strength separate …4 NmStandard Price: MYR 200.29 Days to Ship: 9 Day(s) or more -
50 ml Thread-Locker (Medium Strength, Low Viscosity) EA933AC-3
ESCO
【Product Specifications】
・Blue
・Content-50ml
・Anaerobic adhesive
・Detachable
・For locking and sealing generic screw parts.
・Service temperature：-55 to 150℃
・Cure Time…10 Minute
・Strength separate …11.5 NmStandard Price: MYR 200.29 Days to Ship: 5 Day(s) or more -
50 ml Thread-Locker (High Strength, High Viscosity) EA933AC-9
ESCO
【Product Specifications】
・Red
・Content-50ml
・Weight-81g
・Anaerobic adhesive
・For permanently securing
・For Heat Resistance
・Suitable for the lock sealing of up to M36 bolts.
・Service temperature： -55 to 230℃
・Cure Time…30 Minute
・Strength separate …18NmStandard Price: MYR 200.35 Days to Ship: 5 Day(s) or more -
ESCO
【Product Specifications】
・Green
・Content-50ml
・Anaerobic adhesive
・Excellent heat resistance.
・For securing a sleeve liner, bush subjected to high temperature, etc.
・Service temperature：-55 to 230℃
・Cure Time…10 Minute
・Color … GreenStandard Price: MYR 200.29 Days to Ship: 5 Day(s) or more -
ESCO
【Product Specifications】
・Content-250ml
・Anaerobic (paste, thixotic)
・For sealing building pipe joints (for metal pipe)
・For air-conditioning, fire extinguishing equipment, water supply and drainage, etc.
・Category temperature range： -55 to 150℃Standard Price: MYR 412.92 Days to Ship: 5 Day(s) or more -
Stainless Steel Pipe Sealant EA933AE-3
ESCO
【Product Specifications】
・Content-250ml
・Anaerobic (paste)
・For sealing stainless steel pipe joints
・Category temperature range： -55 to 200℃
・Color-White
・Quick hardening typeStandard Price: MYR 412.69 Days to Ship: 5 Day(s) or more -
Screwing Pipe Sealant EA933AE-4
ESCO
【Product Specifications】
・Anaerobic
・Content-50ml
・For sealing generic screwing pipe joint
・Sealed well, and quickly after assembly
・Category temperature range： -55 to 150℃
・Color-WhiteStandard Price: MYR 117.13 Days to Ship: 5 Day(s) or more -
ESCO
【Product Specifications】
・Content- 50ml
・Anaerobic(paste/thixotic)
・Low strength
・For sealing for generic screwing pipe joint
・Possible to take apart pipes you built easily.
・Service temperature-from -55 to 200℃
・Color- whiteStandard Price: MYR 117.01 Days to Ship: 5 Day(s) or more -
Accelerator for anaerobic adhesive & sealant EA933AF-3
ESCO
【Product Specifications】
・Use this when a metal surface is inactive or a gap is large.
・Active surface-Steel, copper alloy, aluminum alloy, etc.
・Inactivate surface-Stainless steel, zinc, titanium, etc.
・Application-EA933AC-1 to 13, AD-1 to 7, AE-1 to 5, AG-1, EA930TA-25 to 27 (P.1234), EA935BA-21
・Specification…Spray
・Content…160mlStandard Price: MYR 159.65 Days to Ship: 9 Day(s) or more -
ESCO
【Product Specifications】
・for EA934DM-10 to -14.
・Using with EA934WF-50.
・Name-Mixing nozzle(12pcs)Standard Price: MYR 180.22 Days to Ship: 7 Day(s) or more -
ESCO
【Product Specifications】
・For bonding metal, ceramics, wood, concrete, etc. For filling a gap, repairing and bonding rugged surface
・Content-50ml
・Light yellow
・Use this along with EA934WF-50 and -1.Standard Price: MYR 277.71 Days to Ship: 10 Day(s) or more -
![[5min] Powerful Epoxy adhesive EA934KA](//my.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007615882.jpg?$product_view_b$)
[5min] Powerful Epoxy adhesive EA934KA
ESCO
【Product Specifications】
・Mixing 2 liquids
・The hardening starts after 5min
・Epoxy resin
・For bonding and filling a metal, concrete, block, tile, ceramics, wood
・Content…20g setStandard Price: MYR 52.01 Days to Ship: 9 Day(s) or more
![[Impact-resistant] Instant adhesive EA936A-9](http://my.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007618975.jpg?$product_view_b$)
![[5min] Powerful Epoxy adhesive EA934KA](http://my.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007615882.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Color |
| Other |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MUSASHI_ | MUSASHI_ | ESCO | MUSASHI_ | MUSASHI_ | MUSASHI_ | MUSASHI_ | ESCO | ESCO | ESCO | ESCO | MUSASHI_ | MUSASHI_ | NIHON HERMETICS | ESCO | ESCO | ESCO | MUSASHI_ | MUSASHI_ | MUSASHI_ | AS ONE | SANNOUKOUGYOU | SANNOUKOUGYOU | SANNOUKOUGYOU | SANNOUKOUGYOU | SANNOUKOUGYOU | AS ONE | SANKO_ | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO |
| Product Series | 50 ml Thread-Locker (Medium Strength, Low Viscosity) EA933AC-3 | 50 ml Thread-Locker (High Strength, High Viscosity) EA933AC-9 | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 23 Day(s) or more | 10 Day(s) or more | 9 Day(s) | 10 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 9 Day(s) | 10 Day(s) | 5 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 9 Day(s) | 10 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more |
| Product Type | Dispenser type adhesive | Dispenser type adhesive | - | Dispenser type adhesive | Dispenser type adhesive | Dispenser type adhesive | Dispenser type adhesive | - | - | - | - | Dispenser type adhesive | Dispenser type adhesive | - | - | - | - | Dispenser type adhesive | Dispenser type adhesive | Dispenser type adhesive | Sealant For Piping | Sealant For Piping | Sealant For Piping | Sealant For Piping | Sealant For Piping | Sealant For Piping | One part adhesive type | Other Adhesives | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Color | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | Other | White | White / Other | White | White / Other | Green / Other | Black / Other | - | Transparency | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Other | - | - | - | Option | Option | Option | Option | - | - | - | - | Option | Option | - | - | - | - | Option | Option | Option | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![[Impact-resistant] Instant adhesive EA936A-9](http://my.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007618975.jpg?$product_view_c$)
![[5min] Powerful Epoxy adhesive EA934KA](http://my.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007615882.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Product Type
-
Color
-
Other
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy