(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Vehicle Maintenance Tools（Product Type：Generic Tool Page3）
| Days to Ship |
|
|---|
-
KTC(KYOTO TOOL)
[Features]
· Designed with an optimal length and shape for use with O2 sensors.
· Two types of drives (square drive: 9.5 sq., width across flats: 19 mm) are available, allowing use with many drive tools.
· Use the attachments to avoid hindrances.Standard Price: MYR 82.75 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· Has a short overall length, making it suitable for use in narrow places.
· Drive section can be offset to avoid obstacles.
· A 9.5 sq square drive tool can be used.Standard Price: MYR 378.10 Days to Ship: 9 Day(s) -
9.5 Sq. O₂ Sensor Wrench Long Type
KTC(KYOTO TOOL)
[Features]
· The tool's original shape allows it to avoid obstacles, enabling the O2 sensor to be removed without removing front bumper, improving work comfort.
· By adopting a shape that is applicable not only for newer Daihatsu cars but older Daihatsu cars and Suzuki cars as well, this tool can cover most mini car models.Standard Price: MYR 398.26 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
Remove batteries from tight spaces that are unreachable by hand. The batteries are gripped with rubber pads, keeping them protected.
[Applications]
· Removing and transporting automobile batteries.
[Scope]
· Batteries for mini cars, ordinary passenger cars and minivans.
Battery width 120 mm to 180 mm, weight 22 kg or less.
(Reference battery size: JIS26A17RL to 95D31RL)Standard Price: MYR 582.61 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Features]
· Designed with an optimal length and shape for use with O2 sensors.
· Two types of drives (square drive: 9.5 sq., width across flats: 19 mm) are available, allowing use with many drive tools.
· Use the attachments to avoid hindrances.Standard Price: MYR 236.96 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· Shocker (hammer) weight is 5.3 kg.
· AUD3 and AUD4 with 1.2 kg and 3.5 kg respective shocker weights are also available.
· Hex nut (AUD5-6) is available as a service part.Standard Price: MYR 2,110.53 Days to Ship: 8 Day(s) -
Slide Hammer Puller Sheet Metal Hook
KTC(KYOTO TOOL)
[Features]
· Attachments for slide hammer pullers (AUD3, AUD4 and AUD5) to be used with sheet metal.Standard Price: MYR 209.18- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 192.58 Days to Ship: 8 Day(s) -
![Slide Hammer Puller Sheet Metal Hook Set [3 Pc Set]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011916937/223011916937_001.jpg?$product_view_b$)
Slide Hammer Puller Sheet Metal Hook Set [3 Pc Set]
KTC(KYOTO TOOL)
[Features]
· Set containing sheet metal attachments AUD3-B2, B3 and C1 for Slide Hammer Puller AUD3.Standard Price: MYR 1,355.40 Days to Ship: 8 Day(s) -
![Slide Hammer Puller Sheet Metal Hook Set [4 Pc Set]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011916948/223011916948_001.jpg?$product_view_b$)
Slide Hammer Puller Sheet Metal Hook Set [4 Pc Set]
KTC(KYOTO TOOL)
[Features]
· Set containing sheet metal attachments AUD3-B4, C2, D1 and E1-8 for Slide Hammer Puller AUD3.Standard Price: MYR 1,870.83 Days to Ship: 8 Day(s) -
Screw Size Conversion Adapter Set For Slide Hammer Puller AUD Series
KTC(KYOTO TOOL)
[Features]
· Freely set attachments onto slide hammer pullers (KTC and other brands) by using a screw size conversion adapter.Standard Price: MYR 211.05- Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Dedicated tool for stopping doors and rear gates so that they can be kept slightly open when performing sheet metal work or replacing parts.
· Compatible with the following door striker shapes.* Striker ø10 mm or less (excluding vehicles with automatic locking mechanisms).
[Features]
· Can be secured by using it on the lock section of doors.
· Compatible with most models.
· Can be mounted and removed easily.Standard Price: MYR 183.60- Days to Ship: 8 Day(s) or more -
Extendable Adjustment Tweezers For Gate Stopper
KTC(KYOTO TOOL)
[Features]
· Service part for Gate Stopper AP902B.Standard Price: MYR 147.61 Days to Ship: 8 Day(s) -
![Clip Clamp Tool With Hanger Set [11 Pc Set]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917017/223011917017_001.jpg?$product_view_b$)
Clip Clamp Tool With Hanger Set [11 Pc Set]
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.
[Features]
· Come with a handy hanger.Standard Price: MYR 2,520.48 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Dedicated tool for stopping doors and rear gates so that they can be kept slightly open when performing sheet metal work or replacing parts.
· Compatible with the following door striker shapes.* Striker ø10 mm or less (excluding vehicles with automatic locking mechanisms).
[Features]
· Can be secured by using it on the lock section of doors.
· Compatible with most models.
· Can be mounted and removed easily.Standard Price: MYR 487.18 Days to Ship: 8 Day(s) -
Screw Size Conversion Adapter For Slide Hammer Puller
KTC(KYOTO TOOL)
[Features]
· Freely set attachments onto slide hammer pullers (KTC and other brands) by using a screw size conversion adapter.Standard Price: MYR 205.83 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Protecting windshields and seats, etc., against welding or gas cutting sparks during automobile sheet metal work.
[Features]
· AYPC-1 comes with fastener straps for easy attachment to windshields and seats.
· Is magnet free so iron chips are not attracted and the body is not scratched.
· The fabric is a JIS 1323 Type A passed product. Continuous operating temperature 1,000°C. Maximum operating temperature 1,650°C。
· Asbestos free and harmless to humans.Standard Price: MYR 1,928.15- Days to Ship: 8 Day(s) -
![Long Angled Clip Clamp Tool Set [2 Pc Set]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917051/223011917051_001.jpg?$product_view_b$)
Long Angled Clip Clamp Tool Set [2 Pc Set]
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.Standard Price: MYR 395.56 Days to Ship: 8 Day(s) -
![Angled Clip Clamp Tool Set [3 Pc Set]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917062/223011917062_001.jpg?$product_view_b$)
Angled Clip Clamp Tool Set [3 Pc Set]
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.Standard Price: MYR 508.83 Days to Ship: 10 Day(s) -
![Straight Clip Clamp Tool Set [3 Pc Set]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917073/223011917073_001.jpg?$product_view_b$)
Straight Clip Clamp Tool Set [3 Pc Set]
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.Standard Price: MYR 1,184.45 Days to Ship: 8 Day(s) -
![Long Straight Clip Clamp Tool Set [3 Pc Set]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917084/223011917084_001.jpg?$product_view_b$)
Long Straight Clip Clamp Tool Set [3 Pc Set]
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.Standard Price: MYR 1,423.03 Days to Ship: 8 Day(s) -
![Angled Short Clip Clamp Tool Set [2 Pc Set]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917095/223011917095_001.jpg?$product_view_b$)
Angled Short Clip Clamp Tool Set [2 Pc Set]
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.Standard Price: MYR 341.18 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.Standard Price: MYR 204.11- Days to Ship: 8 Day(s) or more -
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.Standard Price: MYR 221.13- Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.Standard Price: MYR 186.61- Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.Standard Price: MYR 232.86- Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in Japan.Standard Price: MYR 232.86- Days to Ship: 8 Day(s) -
Long Movable Fulcrum Clip Clamp Tool
KTC(KYOTO TOOL)
[Applications]
· For automobile lining and clip removal.
[Scope]
· Optimal for lining doors, back doors, quarter panels and floors, etc. in vehicles made in JapanStandard Price: MYR 232.86 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Specifications]
·It is used for removing all linings.
·Please choose according to the size , application, etc.Standard Price: MYR 97.93- Days to Ship: 8 Day(s) or more -
Medium Size Pull Type Handy Remover
KTC(KYOTO TOOL)
[Features]
Removal of general lining and lining near pillarsStandard Price: MYR 106.15 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Features]
Removal of side molding
[Applications]
· Suitable for removing bonded parts such as side molding, etc.Standard Price: MYR 114.28 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Used for automobile lining and clip removal.Standard Price: MYR 261.03 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Features]
· The tip shape now has a thin design, allowing the remover to be inserted into small spaces.Standard Price: MYR 110.23 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Features]
· The section up to the grip employs a flat design, making it optimal for removing clips in deep places.Standard Price: MYR 100.76 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· The tip shape now has a thin design, allowing the remover to be inserted into small spaces.Standard Price: MYR 107.35 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Features]
· A thin design is used for the tip, making the tool suitable for notches in switch base covers, etc.Standard Price: MYR 109.65 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· A thin design is used for the tip, making it possible to use in places where traditionally the tip of flathead screwdrivers needed to be protected first.Standard Price: MYR 91.43 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Features]
· A larger tip shape has been employed, making the tool effective for twisting off panels lifted with AP201-HN or AP201-HF.Standard Price: MYR 91.43 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Features]
· The tip shape now has a thin design, allowing the remover to be inserted into small spaces.Standard Price: MYR 129.76 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· A new remover design has been adopted, making the tool handy for removing clips in deep places.
· The spatula type is suitable for removing audio panels and service hole caps.
[Features]
· This tool is made using resin with fibers for strength and hardness.
· The thin end shape will help avoid scratching the soft olefin resin used in recent vehicles.Standard Price: MYR 282.98 Days to Ship: 8 Day(s) -
KTC(KYOTO TOOL)
[Applications]
· Suitable for removing audio panels and service hole caps.
· The spoon type can be used to twist off panels lifted with the narrow type or flat type.Standard Price: MYR 189.30 Days to Ship: 9 Day(s) -
Clip Clamp Pliers 35° (With Removable Lock Pin)
KTC(KYOTO TOOL)
[Applications]
· Removing resin clips used in front or rear bumpers and front fender liners, etc., of vehicles and compressing / inserting shafts for easy mounting.
[Scope]
· Resin clips with removable lock pin (when mounting clips: shaft diameter ø5 to ø10)
[Features]
· Easily remove (unlock) the lock pin on the clip.
· Can also be used to extract the clip body after removing the lock pin.
· Easily compress / insert the clip shaft section when attaching the clip to the body.
· The tip shape is designed to help avoid scratching the clip.
· The tip has an angled shape, making it easier to avoid scratching the body and lining.
· The tip has arrow marks for easy alignment with clip.Standard Price: MYR 348.76 Days to Ship: 9 Day(s) -
Clip Clamp Pliers 80° (With Removable Lock Pin)
KTC(KYOTO TOOL)
[Applications]
· Removing resin clips used in front or rear bumpers and front fender liners, etc., of vehicles and compressing / inserting shafts for easy mounting.
[Scope]
· Resin clips with removable lock pin (when mounting clips: shaft diameter ø5 to ø10)
[Features]
· Easily remove (unlock) the lock pin on the clip.
· Can also be used to extract the clip body after removing the lock pin.
· Easily compress / insert the clip shaft section when attaching the clip to the body.
· The tip shape is designed to help avoid scratching the clip.
· The tip has an angled shape, making it easier to avoid scratching the body and lining.
· The tip has arrow marks for easy alignment with clip.Standard Price: MYR 348.76 Days to Ship: 9 Day(s) -
Clip Clamp Pliers 35° / 80° Set (Removable Lock Pin Type)
KTC(KYOTO TOOL)
[Applications]
· Removing resin clips used in front or rear bumpers and front fender liners, etc., of vehicles and compressing / inserting shafts for easy mounting.
[Scope]
· Resin clips with removable lock pin (when mounting clips: shaft diameter ø5 to ø10)
[Features]
· Easily remove (unlock) the lock pin on the clip.
· Can also be used to extract the clip body after removing the lock pin.
· Easily compress / insert the clip shaft section when attaching the clip to the body.
· The tip shape is designed to help avoid scratching the clip.
· The tip has an angled shape, making it easier to avoid scratching the body and lining.
· The tip has arrow marks for easy alignment with clip.Standard Price: MYR 626.61 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· This dual-purpose tool has a shaft length that extends to 100 mm / 160 mm.
· Has a magnetic tip that holds bolts securely.
· The tip magnet moves to adjust magnet height and securely holds both countersunk bolts and non-countersunk bolts. (AD601-08 and AD601-10)Standard Price: MYR 164.41- Days to Ship: 9 Day(s)
![Slide Hammer Puller Sheet Metal Hook Set [3 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011916937/223011916937_001.jpg?$product_view_b$)
![Slide Hammer Puller Sheet Metal Hook Set [4 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011916948/223011916948_001.jpg?$product_view_b$)
![Clip Clamp Tool With Hanger Set [11 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917017/223011917017_001.jpg?$product_view_b$)
![Long Angled Clip Clamp Tool Set [2 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917051/223011917051_001.jpg?$product_view_b$)
![Angled Clip Clamp Tool Set [3 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917062/223011917062_001.jpg?$product_view_b$)
![Straight Clip Clamp Tool Set [3 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917073/223011917073_001.jpg?$product_view_b$)
![Long Straight Clip Clamp Tool Set [3 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917084/223011917084_001.jpg?$product_view_b$)
![Angled Short Clip Clamp Tool Set [2 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/223011917095/223011917095_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Type |
| Overall Length(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) |
| Product Series | Screw Size Conversion Adapter Set For Slide Hammer Puller AUD Series | ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 10 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) |
| Product Type | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool | Generic Tool |
| Overall Length(mm) | 58 | - | 91 | - | - | 825 | 80 ～ 220 | - | - | - | 70 ～ 75 | 190 ～ 540 to 740 | - | - | - | 70 | - | - | - | - | - | - | 235 ～ 240 | 270 | 175 ～ 195 | 505 | 505 | 490 | 160 ～ 180 | 160 | 160 | - | 180 | 200 | 200 | 200 | 200 | 200 | 160 | - | - | 196 | 196 | - | 210 to 270 |
![Slide Hammer Puller Sheet Metal Hook Set [3 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/223011916937/223011916937_001.jpg?$product_view_c$)
![Slide Hammer Puller Sheet Metal Hook Set [4 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/223011916948/223011916948_001.jpg?$product_view_c$)
![Clip Clamp Tool With Hanger Set [11 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/223011917017/223011917017_001.jpg?$product_view_c$)
![Long Angled Clip Clamp Tool Set [2 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/223011917051/223011917051_001.jpg?$product_view_c$)
![Angled Clip Clamp Tool Set [3 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/223011917062/223011917062_001.jpg?$product_view_c$)
![Straight Clip Clamp Tool Set [3 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/223011917073/223011917073_001.jpg?$product_view_c$)
![Long Straight Clip Clamp Tool Set [3 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/223011917084/223011917084_001.jpg?$product_view_c$)
![Angled Short Clip Clamp Tool Set [2 Pc Set]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/223011917095/223011917095_001.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Product Type
- Interior related
- Engine Related
- Tire-Related
- Brake Related
- Generic Tool
- For Two-Wheeled Vehicles
-
Overall Length(mm)
- 1,000
- 1,050
- 1,550
- 1,670
- 3,500
- 17
- 18
- 21
- 25
- 26
- 28
- 30
- 31
- 32
- 33
- 34
- 34.5
- 35
- 40
- 43.2
- 44
- 48
- 49
- 50
- 52
- 54
- 55
- Pin: 55
- 56
- 56.5
- 57
- 58
- 58.5
- 60
- 60.5
- 61
- 61.5
- 62
- 63.5
- 64
- 65
- 66
- 67
- 68
- 70
- 72
- 75
- 79
- 80
- 83
- 85
- 87
- 89
- 90
- 91
- 95
- 100
- 101
- 104
- 105
- 108
- 110
- 115
- 119.5
- 120
- 122
- 127
- 130
- 135
- 138
- 139
- 140
- 143
- 145
- 145 to 195
- 148
- 150
- 153
- 154
- 155
- 158
- 160
- 163
- 164
- 165
- 168
- 170
- 170 to 230
- 172
- 173
- 174
- 175
- 177
- 178
- 179
- 180
- 181
- 184
- 185
- 187
- 189
- 190
- 192
- 193
- 195
- 196
- 197
- 200
- 201
- 202
- 203
- 205
- 208
- A: 208, B: 209, C: 194
- 210
- 210 to 270
- 215
- 220
- 221
- 230
- 233
- 235
- 240
- 250
- 250～400
- 260
- 263
- 265
- 270
- 275
- 282
- 290 to 420
- Holder main body: 300 to 415
- 312
- 322
- 330
- 330~450
- Normal: 340, extended: 400
- 350
- 379
- 382
- 385
- 400
- 410
- 420
- 423
- 450
- 490
- 505
- 510
- 530
- 540 to 740
- 549
- 550
- 580
- 600
- 650
- 660
- 675
- 750
- 825
- 836
- 1010
- 1600～3200
- 2250
Narrow search by specifying Manufacturer
-
- KTC(KYOTO TOOL) (125)
- KO-KEN TOOL (5)
- TONE (4)
- ASTRO_PRODUCTS (3)
- HASCO (3)
- ANEX (1)
- ASADA (1)
- MITOLOY (1)
- PB SWISS TOOLS (1)
- SIGNET (1)
- ESCO (0)
- HIRAI KOGU (0)
- SMATO (0)
- SUNFLAG (0)
- MUROMOTO TEKKO (0)
- NIPPEI KIKI (0)
- KUKKO (0)
CAD
-
- 2D
- 3D
Related Categories to Vehicle Maintenance Tools
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy