(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

NIIGATASEIKI
A pin gauge manufactured to plus/minus 0 to 2 μm with respect to the nominal size.
[Features]
· Pin gauges of 1.00 mm or more are printed with P for plus, M for minus, and the dimensions of the pin gauge.
· Sub-zero treatment applied.
· 0.01 mm increments.
· Pin vise included. (PM-0B to PM-6B only)
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
| Standard Price: | MYR 2,051.38 |
|---|---|
| Days to Ship: | 28 Day(s) or more |

Steel Pin Gauge Set AG Series (with Shank)
NIIGATASEIKI
A set of carbide AA series pin gauges embedded in plastic shanks.
[Features]
· Little thermal expansion when held manually for use, improving operability.
· The gauge size is printed on the shank.
· Sub-zero treatment applied.
· 0.01 mm increments.
· Perform measurements with bare hands, because the shank will keep dirt on hands from soiling the gauge.
· Simple handling due to reduced temperature changes from body temperature.
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
| Standard Price: | MYR 2,747.70 |
|---|---|
| Days to Ship: | 22 Day(s) or more |

Carbide Pin Gauge Set TAG Series (with shank)
NIIGATASEIKI
A set of carbide TAA series pin gauges embedded in plastic shanks.
[Features]
· Little thermal expansion when held manually for use, improving operability. Contamination from hands does not adhere to the gauge.
· Excellent abrasion resistance and very economical with a lifespan approximately 20 to 30 times longer than steel. (100x for honing work)
· Low thermal expansion coefficient (1/2 that of steel, 5x10-6/K) reduces the influence of temperature.
· 0.01 mm increments.
· High hardness eliminates worries about scratching the surface. No dimension change even if broken. (bulges at creases/bends)
· Gauge management is easy. (The periodic gauge inspection interval is lengthened, making it economical.)
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
| Standard Price: | MYR 12,225.30 |
|---|---|
| Days to Ship: | 10 Day(s) or more |

Carbide Pin Gauge Set TAA Series
NIIGATASEIKI
Pin gauge set that enables JCSS calibration.
[Features]
· Excellent abrasion resistance and very economical with a lifespan approximately 20 to 30 times longer than steel. (100x for honing work)
· Low thermal expansion coefficient (1/2 that of steel, 5x10-6/K) reduces the influence of temperature.
· 0.01 mm increments.
· High hardness eliminates worries about scratching the surface.
· No dimension change even if broken. (bulges at creases/bends)
· Gauge management is easy. (The periodic gauge inspection interval is lengthened, making it economical.)
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
| Standard Price: | MYR 10,822.52 |
|---|---|
| Days to Ship: | 28 Day(s) or more |

Ceramic Pin Gauge Set CAA Series
NIIGATASEIKI
Ceramic pin gauge has excellent durability that eliminates concerns about rust, and is exceptionally workable and economical. JCSS calibration is also enabled.
[Features]
· Material with exceptional wear resistance in comparison with steel, which strongly resists changes over time with no need to worry about rust or corrosion.
· Very easy to maintain and manage after use. There is little change in plasticity due to scratches or dents and there are no burrs or bulges.
· Material with a thermal expansion coefficient almost identical to steel. Nonmagnetic material that will not become magnetized.
· 0.01 mm increments.
· Pin gauges of 1.50 mm or more are laser marked with the nominal dimensions of the pin gauge.
· Material: Ceramic. (Zirconia)
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
| Standard Price: | MYR 7,998.41 |
|---|---|
| Days to Ship: | 28 Day(s) or more |

Ceramic Pin Gauge Set CAG Series (with Shank)
NIIGATASEIKI
Ceramic pin gauge has little thermal expansion when held manually use, and is exceptionally workable and economical.
[Features]
· A set of carbide CAA series pin gauges embedded in plastic shanks.
· With a shank attached, measurement can be made with bare hands, and dirt from hands does not adhere. Simple handling due to minimal temperature changes from body temperature.
· Exceptional wear resistance in comparison with steel, and strongly resistant to changes over time, with no need to worry about rust or corrosion, and extremely simple maintenance and management after use.
· Material with a thermal expansion coefficient almost identical to steel. Nonmagnetic material that will not become magnetized.
· 0.01 mm increments. There is little change in plasticity due to scratches or dents and there are no burrs or bulges.
· Material: Ceramic. (Zirconia)
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
| Standard Price: | MYR 9,463.64 |
|---|---|
| Days to Ship: | 10 Day(s) or more |
| Brand |
|---|
| Product Series |
| Days to Ship |
| Gauge Diameter |
| Set / Single Item Classfication |
| Product Model |
| Material |
| Brand | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI |
|---|---|---|---|---|---|---|
| Product Series | ||||||
| Days to Ship | 28 Day(s) or more | 22 Day(s) or more | 10 Day(s) or more | 28 Day(s) or more | 28 Day(s) or more | 10 Day(s) or more |
| Gauge Diameter | 6.50~7.00 | 6.50~7.00 | 6.50~7.00 | 6.50~7.00 | 6.50~7.00 | 6.50~7.00 |
| Set / Single Item Classfication | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product |
| Product Model | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge | Pin Gauge |
| Material | Gauge Steel | Gauge Steel | Carbide | Carbide | Ceramic | Ceramic |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy