(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Vises（Page3）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
ENGINEER
[Features]
· The back and both of the sides are machined to right angles, so it can be placed vertically or horizontally.
· With special jaws allowing you to clamp thin plates, cylindrical rods, squared timber and more.
· Turning the jaws over allows them to be used as flat jaws.
[Applications]
· Gripping items strongly and continuously; securing workpieces.Standard Price: MYR 492.21- Days to Ship: 9 Day(s) -
Dedicated Fastening Screws for Monoblock, M10 T-Nut
KOPAL
[Specifications]
·A dedicated T-nut for fixing the Mono-Bloc clamp to the table.Standard Price: MYR 52.20- Days to Ship: 4 Day(s) or more -
HARP
[Product Specifications]
· Thickness of table, etc., to which vise can be mounted: up to approx. 44 mm
· Height from table, etc., to which vise is mounted to the top of the vise portion: approx. 76 mm
· Vise portion tilt angle: approx. 60°Standard Price: MYR 1,300.47 Days to Ship: 10 Day(s) or more -
ESCO
【Product Specifications】
・Jaw width-70mm
・Opening-80mm
・Weight-4.0kg
・Alloy steelStandard Price: MYR 2,520.02 Days to Ship: 5 Day(s) or more -
ESCO
【Product Specifications】
・Material-Cast iron
・The grooved jaw firmly retains the object.
・Jaw width-100
・Max. opening-100mm
・Weight-5.0kgStandard Price: MYR 323.30 Days to Ship: 5 Day(s) or more -
ESCO
[Specifications]
·ESCO precision machine vise, drill press vise.
·Side: Flat type
· Material: Cast ironStandard Price: MYR 754.52- Days to Ship: 5 Day(s) or more -
Vise Collet EA525XC-6【2 Pieces Per Package】
ESCO
【Product Specifications】
・Contact surface-Rubber
・Material-Aluminum alloy + rubber
・With magnet
・Length…150mmStandard Price: MYR 762.32 Days to Ship: 9 Day(s) or more -
Ferrule for Vise EA525XS-1【2 Pieces Per Package】
ESCO
【Product Specifications】
・Materials-rubber
・With Magnet
・Length-140mmStandard Price: MYR 209.40 Days to Ship: 9 Day(s) or more -
ESCO
【Product Specifications】
・Dim.…75 x 76 x 75mm
・Pad dim.…Dia. 55mm
・Pad material…Special rubber
・Weight…262g
・Use this holder to connect small plates.Standard Price: MYR 628.65 Days to Ship: 5 Day(s) or more -
KITAGAWATEKKO
[Features]
· It has a cast iron body with high vibration absorption
· Firmly grasps the workpiece with high tightening force
· The mechanical boost mechanism provides stable clamping force
· Lifting is minimized to achieve stable machining accuracy
· Standard parallel specificationStandard Price: MYR 13,440.27 Days to Ship: 19 Day(s) or more -
NABEYA
[Features]
· Can also be used for metal press clamps and the metal working clamps of injection molding machines.
· It has a structure that prevents the saddle and thrust receiver from falling off the main body.
· Can also be used flipped upside-down.
· The height of the workpiece can be adjusted steplessly.Standard Price: MYR 653.57- Days to Ship: 7 Day(s) or more -
SAKAESEIKI
[Features]
· A screw type precision vise machined with high accuracy. The material used is SKS-3 with a hardening hardness of HRC62°.
· When a vise is used on its side, as there are many ground surface, the perpendicularity becomes stable.
· As the sliding surface is located in the center of the slide surface, the fitting width and slide surface width are the same.Standard Price: MYR 4,328.74- Days to Ship: 6 Day(s) or more -
SAKAESEIKI
[Features]
· A screw type precision vise machined with high accuracy.
· Maximum workpiece size is 150 mm.
The material used is SKS-3 with a hardening hardness of HRC62°.Standard Price: MYR 4,033.32- Days to Ship: 6 Day(s) or more -
SAKAESEIKI
[Features]
· Sine vise that is easy to use with high accuracy. The material used is SKS-3. Hardening hardness is set to HRC62°.
· Incline from 0 to 45° and suitable for precision angle grinding of small accessories.
· Able to set highly accurate angle setting, since it is the sign vise that a block gauge is used.Standard Price: MYR 10,177.85- Days to Ship: 8 Day(s) or more -
SAC-B Type Air Jig Chuck B2 Type For Machining Centers And Peripheral Equipment
KOBAYASHITEKKO
[Applications]
· For machining.
[Features]
· With a larger hollow for a wider workpiece grip.
· Ideal for stationary air chucks and machining centers, milling machines and drilling machines.
· With soft jaw.
· Lightweight and compact.
· Simple to mount.Standard Price: MYR 12,764.05- Days to Ship: 25 Day(s) -
TAKAGI
[Applications]
· For fixing such as welding, drilling and adhesive work
[Specifications]
· Max. opening width: approx. 50 mmStandard Price: MYR 38.50 Days to Ship: 4 Day(s) or more -
TAKAGI
[Features]
· Movable type chuck mouth. Securely fixes objects with an angle
· Improves work efficiency. Simply press the lock release button to release from fixing
· Change the L-shaped handle for work and clamping in tight spacesStandard Price: MYR 50.33 Days to Ship: 5 Day(s) or more -
ARC GREATTOOL
[Specifications]
·For temporary fixing of objects.
·Opening/closing screw storage type, mounting hole: 4 PlacesStandard Price: MYR 126.71- Days to Ship: 10 Day(s) or more -
E VALUE
Enables simple and quick binding work.
[Features]
· Binding and fixing can be accomplished just by opening and closing the mouth.
[Applications]
・ Bundling of electric cords, etc.Standard Price: MYR 14.60- Days to Ship: 10 Day(s) or more -
Parallel Block for Vises - Stepped Model【2 Pieces Per Package】
MISUMI
[Features]
·Stepped parallel block is recommended when you are worried about cutting tool interference
·Specify the height direction in 1 mm increments and freely adjust the gripping width of the workpiece
·Raw material type that is safe even if tool interferes and hardening material type with little settling are availableDays to Ship: 9 Day(s) or more -
Parallel Block (Not Quenched), Stepped Model
MISUMI
[Features]
·With raw material, it is easy to avoid tool breakage during processing
[Application]
·Useful for drilling through hole close to flange of a workpieceDays to Ship: 9 Day(s) or more -
Vise Jaw - Hardened Type / Self-Cut Type -
MISUMI
[Features]
·Jaw cap for vise whose custom dimensions that can be specified, and it can be attached to any company's vise
·S45C type that can be self-cut, and the aluminum type in addition to the hardening material type that can be used for a long time are availableDays to Ship: 8 Day(s) or more -
MISUMI
An angle block which is essential for angle processing with vises. The dimensions can be freely specified
Days to Ship: 8 Day(s) or more -
Standard Price: MYR 1,424.06 Days to Ship: 7 Day(s) or more -
Handle Joint for Loctite CV Precision Machine Vise
NABEYA
[Features]
A component for Lock-Tight CV Precision Machine Vises.
A handle joint.
· RoHS compliant
·Overall length: 200 mm / 250 mm / 300 mm / 350 mm / 400 mm
·Compatible models: Common to all CV modelsStandard Price: MYR 229.17- Days to Ship: 7 Day(s) or more -
NABEYA
The movable part slides smoothly along the central groove. Designed to sufficiently withstand powerful tightening. FC250 is used for the main body and movable parts, preventing it from being damaged even when used for heavy-duty work. Planar processing on the bottom surface is particularly precisely finished, and does not tilt or deviate on the drill table.
Standard Price: MYR 217.35 Days to Ship: 6 Day(s) or more -
NABEYA
Raised structure that avoids the interference of the machine spindle: The length of the cutter can be shortened to reduce processing time and labor. Loctite lift prevention mechanism: A hemispherical segment is used to apply force on the movable part in a downward sloping direction at 45 degrees in order to prevent the workpiece from rising up. Socket replacement type: Three types of socket are included as standard and can be selected according to the machining conditions.
Standard Price: MYR 14,357.51- Days to Ship: 13 Day(s) or more -
Loctite Precision Machine Vise L Type
NABEYA
The opening is 45% bigger compared with vises of the same type (LT150M). Weight is 20% lighter than vises of the same size to make it easy to carry. The lifting prevention mechanism suppresses the uplift of a movable object or workpiece. It is made of ductile cast iron, preventing warping and damage during tightening. The sliding part has excellent wear resistance as it has been flame quenched.
Standard Price: MYR 5,982.09- Days to Ship: 12 Day(s) or more -
FA Mouthpiece for Machine Vise
NABEYA
[Features]
A standard fitting for Machine Vise Series.
·Thread diameter: M8/M10/M12
·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175QStandard Price: MYR 661.48- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 224.28- Days to Ship: 4 Day(s) or more -
NABEYA
Convenient for 5-face machining of the workpiece. Securely clamps the workpiece base. Two types of clamp are available depending on the workpiece. FOJ-BS is suitable for ferrous metals and FOJ-GS for non-ferrous metals.
Standard Price: MYR 2,024.43- Days to Ship: 7 Day(s) or more -
Pull Down Vise【2 Pieces Per Package】
NABEYA
Handles small mouth openings caused by defects in machine vise, milling vise, shaper vise, or similar. Can grasp without restriction by matching up the table of the planar, shaper, milling cutter, or horizontal boring machine, etc., and the workpiece. The workpiece can be prevented from rising up with strong clamping as it is pulled down while clamped. Thanks to the use of specially made ductile iron, the body is damage-proof.
Standard Price: MYR 2,392.30- Days to Ship: 4 Day(s) or more -
Flat Jaw Plates for 5-Axis Machine Vise
NABEYA
[Features]
A flat jaw plate for Lock-Tight 5-Axis Machine Vises.
·Compatible vise: LT5AU-75 (F,FM)/LT5AU-75,100 (M)/LT5AU-100 (M)Standard Price: MYR 404.53- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 215.50 Days to Ship: 7 Day(s) or more -
NABEYA
The movable part slides smoothly along the central groove. Designed to sufficiently withstand powerful tightening. FC250 is used for the main body and movable parts, preventing it from being damaged even when used for heavy-duty work. Planar processing on the bottom surface is particularly precisely finished, and does not tilt or deviate on the drill table.
Standard Price: MYR 586.63- Days to Ship: 4 Day(s) or more -
NABEYA
A jig vise for MS.FA with a lifting prevention mechanism that suppresses the uplift of a movable object or workpiece. It incorporates a patent-pending hydraulic mechanism and enables smooth operation. Cost cutting is also possible through use as a horizontal, upright, or MC vise. Can be used for an upright MC or milling machine with the same precision as a 2-face, 4-face, or angle rest, on a horizontal type MC.
Standard Price: MYR 39,051.26 Days to Ship: 13 Day(s) or more -
Standard Price: MYR 782.17- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 315.85- Days to Ship: 6 Day(s) or more -
Pull Down Vise Mouthpiece Coarse【2 Pieces Per Package】
NABEYA
Standard clamp (coarse) for pull-down vise (free jaw vise).
Standard Price: MYR 283.42- Days to Ship: 9 Day(s) or more -
NABEYA
Ideal for machining mold plates. Features a large opening and fast-feed mechanism. The jaw opens 30% larger than conventional hydraulic vises to make the unit 30% more compact (in-house comparison). The main body and movable parts are made of ductile cast iron that does not get damaged, and the sliding surface features outstanding wear resistance thanks to the flame quenching. Provides overwhelmingly superior cost performance when compared with vises of the same size.
Standard Price: MYR 12,341.66- Days to Ship: 13 Day(s) or more -
Standard Price: MYR 661.48- Days to Ship: 4 Day(s) or more -
NABEYA
[Features]
A component of Machine Vise Series · A mounting bolt.
·Compatible vise: LT200M,LT250M,LT-HPD80E
·Compatible slot width: 22 mm
·Set contents: TNM2220 (T-slot nut), FNM0020 (flange nut), BM20100 (stud bolt)Standard Price: MYR 263.98 Days to Ship: 7 Day(s) or more -
NABEYA
[Features]
· The height is designed with the jaw depth of the vise in mind.
· A thin type that's convenient for machining through holes close to the end face of a workpiece (especially the step type).
· A 2-piece set.Standard Price: MYR 786.19- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 223.19 Days to Ship: 4 Day(s) or more -
FA Step Mouthpiece for Machine Vise
NABEYA
[Features]
A step jaw plate for Machine Vise Series.
·Thread diameter: M8/M10/M12
·Compatible vise: LTFV75/LTFV100Q/LTFV·LTFH125Q/LTFV·LTFH150Q/LTFV·LTFH175QStandard Price: MYR 782.17- Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ENGINEER | KOPAL | HARP | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | KITAGAWATEKKO | NABEYA | SAKAESEIKI | SAKAESEIKI | SAKAESEIKI | KOBAYASHITEKKO | TAKAGI | TAKAGI | ARC GREATTOOL | E VALUE | MISUMI | MISUMI | MISUMI | MISUMI | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA |
| Product Series | SAC-B Type Air Jig Chuck B2 Type For Machining Centers And Peripheral Equipment | Parallel Block for Vises - Stepped Model【2 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 4 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 19 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 25 Day(s) | 4 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 13 Day(s) or more | 12 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 13 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) or more | 13 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more |
Loading...
Configure
Narrow search by specifying Manufacturer
-
- TRUSCO NAKAYAMA (159)
- NABEYA (109)
- ESCO (55)
- SUPER TOOL (26)
- BESSEY (22)
- GRIPONTOOLS (22)
- TAKAGI (14)
- MITSUTOMO (13)
- NIHONAUTOMATIC (11)
- ARC GREATTOOL (10)
- MURATEC_KDS (9)
- KTC(KYOTO TOOL) (9)
- SMATO (9)
- SIGNET (8)
- SK 11 (8)
- E VALUE (6)
- KOPAL (6)
- LOBTEX (6)
- SAKAESEIKI (6)
- TRAD (6)
- GISUKE (5)
- KOBAYASHITEKKO (5)
- GREENCROSS (4)
- HARP (4)
- MCC CORPORATION (4)
- AS ONE (3)
- GIGA SELECTION (3)
- HOZAN (3)
- NEW STRONG (3)
- ARC (2)
- BAKUMA (2)
- KITAGAWATEKKO (2)
- MINITOR (2)
- TOP (2)
- WAKAJISHI (1)
- BESTTOOL (1)
- ENGINEER (1)
- GERARDI (1)
- H & H (1)
- KONDOTEC (1)
- RIKEN KEISOKUKI (1)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy