(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Lathe Jigs（Tip Carbide Insert (Y/N)：N/A）
| Days to Ship |
|
|---|
-
FUTAMURAKIKI
[Features]
· Inside this product, there are two ball bearings on M.T No. 1 and No. 2, and 1 thrust bearing. 3 types of each of taper roller bearing, thrust bearing and ball bearing are used for M.T No. 3 to No. 7.Standard Price: MYR 1,471.00- Days to Ship: 7 Day(s) or more -
TAKURA KOGU
[Features]
· Fully quenched and polished, HRC 60-63.
· The head drive mechanism, created from many years of experience, prevents the ingress of fine cutting powder and cutting fluid (bearing has long service life).
· The rotation speed is up to 3,000 min-1 for MT-2, MT-3, and MT-4, 2,000 min-1 for MT-5, and 1,000 min-1 for MT-6.Standard Price: MYR 757.82- Days to Ship: 5 Day(s) or more -
FUTAMURAKIKI
[Features]
· Forcing nut is equipped on the rear part of the main body to be able to remove from the front part of the tailstock.
· Inside this product, combined angular bearing (3 pcs) and needle bearing are used, which makes smooth rotation torque.
· A and C type are fine type, suitable for screw cutting and edge surface processing.
· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.Standard Price: MYR 4,044.60- Days to Ship: 7 Day(s) or more -
Rolling Center 100 With Stickers
FUTAMURAKIKI
[Features]
· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
· 3 bearing including 2 needle bearings and 1 thrust bearing are used inside this product, and the main body diameter is designed to be small.
· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.
· V seal is adopted and suitable when cutting oil is used.Standard Price: MYR 1,645.71- Days to Ship: 7 Day(s) or more -
Work Driving Center DK Claw Fixed
FUTAMURAKIKI
[Features]
· Ideal for gear cutting, spline processing, keyway processing, and woodworking.
· There will be no need of chuck if this device is used.
· As the processing items are maintained in both centers, the finishing of the processed items are the best.
· Single-action detaching / attaching of processed items is possible.
· By using the extraction nut, it is easy to remove from the machine.Standard Price: MYR 3,787.09- Days to Ship: 7 Day(s) or more -
S Type Live Center (for High Speed)
TAKURA KOGU
[Features]
· This rolling center is a live center which appropriately arranges ball bearing (mainly needle bearings) for a compact external shape with high load capacity, high rigidity and wide working range.
· Components are designed to withstand rough use from high speed to low speed, processed with technologies from many years of tooling manufacturing for excellent compatibility and wear resistance.Standard Price: MYR 1,073.43- Days to Ship: 6 Day(s) or more -
Umbrella-shaped rotating center (with bearings/TLK)
TRUSCO NAKAYAMA
[Features]
· With bearing.
[Applications]
· As a tool for centering holes at the pipe center.Days to Ship: 5 Day(s) or more -
NAKANE Rotating Center, Standard Type, includes Oil Sheet LSP
SANYOSEISAKUSYO
Equipped with both high rigidity and waterproofing
[Features]
· By making the rotation center itself a bearing, a slim design with high rigidity and durability has been achieved.
· Highly waterproof and dustproof in low to medium speed regions.
· Also ideal for grinding and hobbing machines.Standard Price: MYR 1,558.97- Days to Ship: 10 Day(s) or more -
Kabuto Seal Center With Cold Punched Nut KSN-A
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an oil seal.
· Waterproof function maintained even under slower rotation.
· Exchangeable tip provides reductions in cost.Standard Price: MYR 3,276.81- Days to Ship: 12 Day(s) or more -
FUTAMURAKIKI
[Features]
· The product is designed by focusing on the super high speed rotation (7000 min-1) and high accuracy (TIR 0.003).
· Carbide insert is attached on the tip part to withstand abrasion and friction due to super high speed rotation. (A type)
· By using the combined angular bearing (3 places) and two types of bearings of needle bearings inside this product, it is finely designed and assembled to withstand rigidity.
· The use of a unique labyrinth mechanism (non-contact) as a measure to prevent immersion when cutting oil is used eliminates wear, friction, and power loss, reduces the temperature rise of the machine, and improves accuracy and reliability of lifespan.Standard Price: MYR 4,972.86- Days to Ship: 11 Day(s) or more -
FUTAMURAKIKI
[Features]
· Angular bearing, thrust bearing and needle roller bearing are used for smooth rotation torque.
· Suitable for screw cutting and edge surface processing, as A, C and E-type are fine type.
· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.Standard Price: MYR 2,941.63- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
[Features]
· Since the processing heat generated by the elongation of the workpiece is absorbed by the flat spring built into the center, there is no distortion of a workpiece and its finishing accuracy improves.
· The thrust load generated by the elongation of the workpiece is also absorbed to the slide mechanism, and it is designed not to apply load to the bearing directly.Standard Price: MYR 2,619.55- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
[Features]
· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
· 2 needle bearings and 3 thrust bearings are used inside this product, and the main body diameter is designed to be small.
· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.Standard Price: MYR 984.07- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
Large bearings have been adopted and the main unit O.D. and center shaft diameter have been made thicker in order to withstand larger loads than a standard type
Standard Price: MYR 5,042.75- Days to Ship: 11 Day(s) or more -
FUTAMURAKIKI
[Features]
· Center runout (maximum) against M.T. is TIR 0.01.
· Hydraulic mechanism is adopted to the claw operation and the edge surface is maintained evenly by independent operation of the claw.
· The claw and the center shaft are made of high-speed steel to achieve high durability.Standard Price: MYR 5,983.93- Days to Ship: 7 Day(s) or more -
Work Driving Center, HD-Type Replacing Claw
FUTAMURAKIKI
When the claw of the work driving center is worn and damaged, promptly replace the claw before using.
Standard Price: MYR 744.79- Days to Ship: 11 Day(s) or more -
Umbrella Type Rotation Center BRC
FUTAMURAKIKI
[Features]
· Used for lathes and cylindrical grinding machines.
· Used for center pushing tool of pipe type, ring type and thin processed items.
· Inside this product, 3 types, each one of taper roller bearing, thrust bearing and ball bearing, are prepared.Standard Price: MYR 2,123.52- Days to Ship: 7 Day(s) or more -
Bull Nose Rolling Center LCU Series
TAKURA KOGU
[Features]
· The diameter of the shank base was increased and can be removed using the forcing nut equipped on the tailstockStandard Price: MYR 890.50- Days to Ship: 7 Day(s) or more -
NSK lathe jig rotation center LC-A type
NSK
[Features]
· Since the run-out of center spindle tapered part is 5 µm or less, tapered roller bearings, thrust ball bearings, and needle bearings have been used.
[Applications]
· Workpiece support and runout prevention.Standard Price: MYR 1,969.70- Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· It is all pure steel.
[Applications]
· Prevents runout of workpiece.Standard Price: MYR 162.14- Days to Ship: 5 Day(s) or more -
NAKANE Rotating Center, High-Speed Waterproof Type LF SP
SANYOSEISAKUSYO
With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation. Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).
[Features]
· With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.
· 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.Standard Price: MYR 1,580.32- Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, High-Speed Waterproof Type LF TP
SANYOSEISAKUSYO
With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation.
[Features]
· Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).
· With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.
· 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.Standard Price: MYR 1,862.82- Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut
SANYOSEISAKUSYO
[Features]
· Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.Standard Price: MYR 1,819.71- Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, High-Speed Waterproof Type, LF, TP, with Cold Punched Nut
SANYOSEISAKUSYO
[Features]
· Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.Standard Price: MYR 2,072.93- Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, Light Torque, Waterproof Type FP SP
SANYOSEISAKUSYO
Oil seal exhibits waterproofing effects while not rotating.
[Features]
· Inherits the compact design that is characteristic of NAKANE (same size as standard type).
· Rotation follows quick-starting machines.
· 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.Standard Price: MYR 1,694.01- Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, Light Torque, Waterproof Type FP TP
SANYOSEISAKUSYO
Oil seal exhibits waterproofing effects while not rotating.
[Features]
· Inherits the compact design that is characteristic of NAKANE (same size as standard type).
· Rotation follows quick-starting machines.
· 2 types of tip shape, SP and TP, are available to choose from for optimum center selection.Standard Price: MYR 1,980.98- Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, High-Speed Waterproof Type, FP, SP, with Cold Punched Nut
SANYOSEISAKUSYO
Easy to detach and attach in front with the forcing nut.
[Features]
· The nut fits into the same size LF type and FP type.Standard Price: MYR 1,887.24- Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, High-Speed Waterproof Type, FP, TP, with Cold Punched Nut
SANYOSEISAKUSYO
Easy to detach and attach in front with the forcing nut.
[Features]
· The nut fits into the same size LF type and FP type.Standard Price: MYR 2,191.09- Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, Standard Type LS
SANYOSEISAKUSYO
Secures high rigidity and durability while maintaining slim shape.
[Features]
· By making the rotation center itself a bearing, a slim design with high rigidity and durability has been achieved.
· General purpose waterproofing is realized during rotation because there is no opening in the forward direction.
· Optimal for threading of thin objects, etc.Standard Price: MYR 1,280.44- Days to Ship: 4 Day(s) or more -
NAKANE Rotating Center, Load Type M
SANYOSEISAKUSYO
Supports MT6 or later large machinery.
[Features]
· Uses 2 large angular bearings to maintain high accuracy.
· Metric 80 (1/20 taper) standard lineup also.Standard Price: MYR 28,496.80 Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, Strong Type XP
SANYOSEISAKUSYO
This model supports a load resistance improved from the standard type.
[Features]
· Has the structure of the standard type but with an improved load resistance.
· 1.2 to 1.5 times the load capacity of LS/LSP.
· Highly waterproof and dustproof in low to medium speed regions.Standard Price: MYR 2,781.53- Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, Slide Back Type H
SANYOSEISAKUSYO
Can handle changes caused by heat swelling in machining of items such as long objects.
[Features]
· Slide-back structure using a dish spring.
· Prevents distortion due to thermal expansion of workpieces and wear of the center hole.
· The shape of the tip does not interfere with tool progress.Standard Price: MYR 2,634.98- Days to Ship: 6 Day(s) or more -
NAKANE Rotating Center, Bevel Type BS
SANYOSEISAKUSYO
For large diameter workpieces such as pipes.
[Features]
· Thickened shaft core and rigidity against load weight are optimal for high-precision heavy cutting.
· Supports pipes and large I.D. workpieces. Lineup of MT2 to 4, 60° tip products.
· Oil seal and O-ring prevent permeation of cutting fluid and cutting dust.Standard Price: MYR 1,816.27- Days to Ship: 6 Day(s) or more -
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an oil seal.
· Waterproof function maintained even under slower rotation.
· Exchangeable tip provides reductions in cost.Standard Price: MYR 2,720.77- Days to Ship: 6 Day(s) or more -
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an oil seal.
· Waterproof function maintained even under slower rotation.
· Exchangeable tip provides reductions in cost.Standard Price: MYR 2,244.15- Days to Ship: 6 Day(s) or more -
Kabuto Seal Center With Cold Punched Nut KSN
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an oil seal.
· Waterproof function maintained even under slower rotation.
· Exchangeable tip provides reductions in cost.Standard Price: MYR 3,733.60- Days to Ship: 6 Day(s) or more -
Kabuto Seal Center With Cold Punched Nut KSN-B
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an oil seal.
· Waterproof function maintained even under slower rotation.
· Exchangeable tip provides reductions in cost.Standard Price: MYR 3,276.81- Days to Ship: 12 Day(s) or more -
KABUTO MFG
[Features]
· Regular model for general lathes.
· Exchangeable tip provides reductions in cost.Standard Price: MYR 1,171.73- Days to Ship: 4 Day(s) or more -
KABUTO MFG
[Features]
· Regular model for general lathes.
· Exchangeable tip provides reductions in cost.Standard Price: MYR 10,942.53 Days to Ship: 12 Day(s) or more -
KABUTO MFG
[Features]
· Waterproof structure keeps out cutting fluid by means of an air film resulting from rotation.
· Light rotational torque ideal for fine machining or light metal working.
· Replacement type head provides reductions in cost.Standard Price: MYR 3,395.99- Days to Ship: 12 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type |
| Mounting type |
| Compatible Chuck Nominal Size |
| Jaw Height(mm) |
| Compatible Manufacturer |
| Chuck Outer Diameter(mm) |
| Number of Jaws |
| Shank MT No |
| Tip Carbide Insert (Y/N) |
| Tip Width Across Flat(mm) |
| Auxiliary Jig Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | FUTAMURAKIKI | TAKURA KOGU | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | TAKURA KOGU | TRUSCO NAKAYAMA | SANYOSEISAKUSYO | KABUTO MFG | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | TAKURA KOGU | NSK | TRUSCO NAKAYAMA | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | KABUTO MFG | KABUTO MFG | KABUTO MFG | KABUTO MFG | KABUTO MFG | KABUTO MFG | KABUTO MFG |
| Product Series | NAKANE Rotating Center, Standard Type, includes Oil Sheet LSP | NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut | NAKANE Rotating Center, High-Speed Waterproof Type, LF, TP, with Cold Punched Nut | NAKANE Rotating Center, High-Speed Waterproof Type, FP, SP, with Cold Punched Nut | NAKANE Rotating Center, High-Speed Waterproof Type, FP, TP, with Cold Punched Nut | |||||||||||||||||||||||||||||||||||
| Days to Ship | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more |
| Type | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center |
| Mounting type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Chuck Nominal Size | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Jaw Height(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Manufacturer | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Chuck Outer Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of Jaws | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 ～ 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank MT No | MT1 ～ MT6 | MT3 ～ MT6 | MT3 ～ MT5 | MT2 ～ MT5 | MT3 ～ MT4 | MT2 ～ MT6 | MT2 ～ MT7 | MT1 ～ MT6 | MT3 ～ MT5 | MT3 ～ MT5 | MT3 ～ MT5 | MT3 ～ MT5 | MT2 ～ MT5 | MT5 ～ MT6 | MT4 ～ MT5 | - | MT2 ～ MT6 | MT2 ～ MT6 | MT3 ～ MT5 | MT1 ～ MT6 | MT1 ～ MT5 | MT1 ～ MT5 | MT2 ～ MT5 | MT2 ～ MT5 | MT1 ～ MT5 | MT1 ～ MT5 | MT2 ～ MT5 | MT2 ～ MT5 | MT1 ～ MT5 | Metric80 | MT3 ～ MT4 | MT3 ～ MT4 | MT2 ～ MT6 | MT3 ～ MT5 | MT2 ～ MT5 | MT3 ～ MT5 | MT3 ～ MT5 | MT2 ～ MT5 | MT6 | MT3 ～ MT5 |
| Tip Carbide Insert (Y/N) | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Tip Width Across Flat(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Auxiliary Jig Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Type
- Soft Jaw
- Soft Jaw Molding Jig / Soft Jaw Molding Holder
- Lathe Chuck
- Rotation Center / Lathe Center
- Scroll Chuck Handle
- Jaw Nut
- Tailstock / Auxiliary Jig
-
Mounting type
- Serrated Type
- Upper and Lower Divided Jaw Type
-
Compatible Chuck Nominal Size
- B-212
- B-210
- B-208
- B-206
- B-205
- B-21
- B-15
- B-12
- B-10
- B-08
- B-06
- 4
- 5
- Type B 05
- Type HJ 5
- 5、6、8
- 5～8
- 6
- Type B 06
- Type GO 6
- 6、8、10
- 6～10
- 7
- 7・8
- 8
- Type B 08
- Type H 8-46
- 8、10、12
- 8～12
- 9
- 9・10
- 10
- Type B 10
- Type GO 10
- Type H 10-67
- 12
- Type B 12
- Type HJ 12
- 14～16
- 15
- Type B 15/18
- 15～22
- 16
- 18
- 21
- Type B 21/24
- Type HJ 24
- 80
- 85
- 110
- 130
- 140
- 160
- 165
- 190
- 200
- Type B 204/205
- Type B 206
- Type B 208
- Type B 210
- Type B 212
- Type B 215
- 230
- 250
- 273
- 310
- 385
- 400
- 460
- 500
-
Jaw Height(mm)
-
Compatible Manufacturer
- Kitagawa
- Howa
- Nikko
- Matsumoto
- Hitachi
- Victor
- Other
-
Chuck Outer Diameter(mm)
-
Number of Jaws
-
Shank MT No
-
Tip Carbide Insert (Y/N)
- Yes
- N/A
-
Tip Width Across Flat(mm)
-
Auxiliary Jig Type
- Die Holder
- Dog
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- SANYOSEISAKUSYO (14)
- FUTAMURAKIKI (12)
- KABUTO MFG (8)
- TAKURA KOGU (3)
- TRUSCO NAKAYAMA (2)
- NSK (1)
- GIGA SELECTION (0)
- ARM SANGYO (0)
- NEW STRONG (0)
- OKUKAWATEKOUSYO (0)
- KITAGAWATEKKO (0)
- THE_CUT (0)
- TEIKOKU_CHUCK (0)
- KOBAYASHITEKKO (0)
- KAWASHIMO (0)
CAD
-
- 2D
- 3D
Related Categories to Lathe Jigs
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy