(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Lathe Jigs（Type：Soft Jaw Molding Jig / Soft Jaw Molding Holder）
| Days to Ship |
|
|---|
-
MISUMI
Not quenched and can be easily processed according to the workpiece diameter. Available at an affordable price.
- Volume Discount
Standard Price: MYR 813.36- Days to Ship: 4 Day(s) or more -
KAWASHIMO
[Features]
·Soft jaw forming setup can be completed within one minute. Machining is completed in a short time. Even inexperienced users can perform centering with a single touch. Core runout accuracy is improved to 10 microns.
·It also increases your grasping power.
·No jigs such as cores, rings, etc. are required.
·Tightening margin can be freely adjusted by simply rotating the chuck mate to the left or right.
·On NC lathes, it does not interfere with permanent tooling, and caliper measurements can be taken while the caliper is still attached.
·It is lightweight, easy to handle, has a simple structure, and can be used for a long time.
·Grip chuck, tension chuck, and pass-through molding can all be done easily with this one tool.
·The bolt hole of the soft jaw is used for the hole for inserting the stop pin. No need to drill taps or extra holes.
·All you have to do is insert 3 set pins into the spot facing holes of the soft jaw mounting holes, tighten the chuck (open the tension chuck), and you are ready to go!
[Applications]
·Applies to soft jaw forming holders for chuck work.Standard Price: MYR 1,261.18- Days to Ship: 5 Day(s) or more -
Soft-Jaw Molding Tool For JB-TYPE Hydraulic/Pneumatic Chucks
GIGA SELECTION
[Features]· Soft jaw molding tool for 3-jaw chucks with which soft-jaw molding can be implemented under the same conditions as when chucking workpieces, improving center runout precision and also enhancing gripping force. · Can be used for each manufacturer's hydraulic/pneumatic chucks.
Standard Price: MYR 1,165.38- Days to Ship: 6 Day(s) or more -
Soft Jaw Molding Tool For TL-TYPE Hydraulic/Pneumatic Chucks
GIGA SELECTION
[Features]· Economical molding tool that allows molding of soft jaws for multiple chuck sizes on one tool. · Soft jaw molding can be implemented under the same conditions as when chucking workpieces, improving center runout precision and also enhancing gripping force. · The molding tool jaw is interchangeable between a forward direction and backward direction, providing a wide adjustment range.
Standard Price: MYR 2,668.90- Days to Ship: 12 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type |
| Mounting type |
| Compatible Chuck Nominal Size |
| Jaw Height(mm) |
| Compatible Manufacturer |
| Chuck Outer Diameter(mm) |
| Number of Jaws |
| Shank MT No |
| Tip Carbide Insert (Y/N) |
| Tip Width Across Flat(mm) |
| Auxiliary Jig Type |
|
|
|
| |
| Brand | MISUMI | KAWASHIMO | GIGA SELECTION | GIGA SELECTION |
| Product Series | Soft-Jaw Molding Tool For JB-TYPE Hydraulic/Pneumatic Chucks | Soft Jaw Molding Tool For TL-TYPE Hydraulic/Pneumatic Chucks | ||
| Days to Ship | 4 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 12 Day(s) or more |
| Type | Soft Jaw Molding Jig / Soft Jaw Molding Holder | Soft Jaw Molding Jig / Soft Jaw Molding Holder | Soft Jaw Molding Jig / Soft Jaw Molding Holder | Soft Jaw Molding Jig / Soft Jaw Molding Holder |
| Mounting type | - | - | - | - |
| Compatible Chuck Nominal Size | 5 ～ 15 | 5 ～ 15 | 4 ～ 15 | 5～8 ～ 8～12 |
| Jaw Height(mm) | - | - | - | - |
| Compatible Manufacturer | - | - | - | - |
| Chuck Outer Diameter(mm) | - | 127 ～ 381 | - | - |
| Number of Jaws | - | - | - | - |
| Shank MT No | - | - | - | - |
| Tip Carbide Insert (Y/N) | - | - | - | - |
| Tip Width Across Flat(mm) | - | - | - | - |
| Auxiliary Jig Type | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Type
- Soft Jaw
- Soft Jaw Molding Jig / Soft Jaw Molding Holder
- Lathe Chuck
- Rotation Center / Lathe Center
- Scroll Chuck Handle
- Jaw Nut
- Tailstock / Auxiliary Jig
-
Mounting type
- Serrated Type
- Upper and Lower Divided Jaw Type
-
Compatible Chuck Nominal Size
- B-212
- B-210
- B-208
- B-206
- B-205
- B-21
- B-15
- B-12
- B-10
- B-08
- B-06
- 4
- 5
- Type B 05
- Type HJ 5
- 5、6、8
- 5～8
- 6
- Type B 06
- Type GO 6
- 6、8、10
- 6～10
- 7
- 7・8
- 8
- Type B 08
- Type H 8-46
- 8、10、12
- 8～12
- 9
- 9・10
- 10
- Type B 10
- Type GO 10
- Type H 10-67
- 12
- Type B 12
- Type HJ 12
- 14～16
- 15
- Type B 15/18
- 15～22
- 16
- 18
- 21
- Type B 21/24
- Type HJ 24
- 80
- 85
- 110
- 130
- 140
- 160
- 165
- 190
- 200
- Type B 204/205
- Type B 206
- Type B 208
- Type B 210
- Type B 212
- Type B 215
- 230
- 250
- 273
- 310
- 385
- 400
- 460
- 500
-
Jaw Height(mm)
-
Compatible Manufacturer
- Kitagawa
- Howa
- Nikko
- Matsumoto
- Hitachi
- Victor
- Other
-
Chuck Outer Diameter(mm)
-
Number of Jaws
-
Shank MT No
-
Tip Carbide Insert (Y/N)
- Yes
- N/A
-
Tip Width Across Flat(mm)
-
Auxiliary Jig Type
- Die Holder
- Dog
Narrow search by specifying Manufacturer
-
- GIGA SELECTION (2)
- KAWASHIMO (1)
- ARM SANGYO (0)
- NEW STRONG (0)
- KABUTO MFG (0)
- FUTAMURAKIKI (0)
- NSK (0)
- OKUKAWATEKOUSYO (0)
- SANYOSEISAKUSYO (0)
- TAKURA KOGU (0)
- KITAGAWATEKKO (0)
- THE_CUT (0)
- TEIKOKU_CHUCK (0)
- KOBAYASHITEKKO (0)
- TRUSCO NAKAYAMA (0)
CAD
-
- 2D
- 3D
Related Categories to Lathe Jigs
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy