(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Grooving / Cutting Off Holders（Selfishly：Left-hand Page2）
| Days to Ship |
|
|---|
-
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_b$)
Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type
KYOCERA
A clamp-on type outer diameter shallow grooving holder.
[Shank Material]SteelStandard Price: MYR 614.23- Days to Ship: 6 Day(s) or more -
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_b$)
Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type
KYOCERA
A clamp-on type outer diameter shallow grooving holder.
[Shank Material]SteelStandard Price: MYR 666.66- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 101.44 Days to Ship: 4 Day(s) or more -
Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.
Standard Price: MYR 880.00- Days to Ship: 10 Day(s) or more -
Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)
KYOCERA
[Specifications]·Machining applications: grooving / parting-off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS
Standard Price: MYR 527.13- Days to Ship: 10 Day(s) -
Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)
KYOCERA
[Specifications]·Machining applications: grooving / parting-off; holder angle (°): 90; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS
Standard Price: MYR 774.66 Days to Ship: 6 Day(s) or more -
Multi-Functional / Grooving (Cutting-Off) Chip FGG Type
KYOCERA
Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.
Standard Price: MYR 117.54- Days to Ship: 6 Day(s) or more -
Lathe Turning/Cutting (Multi-Function) Bit GMM Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.
Standard Price: MYR 73.95- Days to Ship: 10 Day(s) -
Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.
Standard Price: MYR 67.38- Days to Ship: 10 Day(s) or more -
Multi-Functional / Grooving Holder KGM Type (For Automatic Board)
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.
Standard Price: MYR 618.26- Days to Ship: 10 Day(s) -
Multi-Functional / Grooving Holder KGM Type
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.
Standard Price: MYR 747.10- Days to Ship: 6 Day(s) or more -
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type
KYOCERA
A clamp-on type outer diameter deep grooving holder.
For outer diameter deep grooving.
A right angle type.Standard Price: MYR 914.93- Days to Ship: 10 Day(s) -
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type
KYOCERA
A clamp-on type outer diameter deep grooving holder.
For outer diameter deep grooving.Standard Price: MYR 747.30- Days to Ship: 10 Day(s) -
Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 827.39- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 424.95 Days to Ship: 6 Day(s) or more -
Inner Diameter Groove SIGE Type Compatible Chip
KYOCERA
B dimension: Indicates machinable groove depth.
Standard Price: MYR 91.40- Days to Ship: 4 Day(s) or more -
Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)
KYOCERA
Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.
Standard Price: MYR 1,819.98- Days to Ship: 6 Day(s) or more -
Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)
KYOCERA
GIV model tip for small diameter grroving.
Standard Price: MYR 72.19- Days to Ship: 4 Day(s) or more -
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type
KYOCERA
[Specifications]·Machining applications: grooving; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integrated
Standard Price: MYR 1,094.05 Days to Ship: 10 Day(s) -
Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit)
KYOCERA
T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.
Standard Price: MYR 459.48- Days to Ship: 10 Day(s) -
Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)
KYOCERA
· T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.
Standard Price: MYR 1,011.73- Days to Ship: 6 Day(s) or more -
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA
KYOCERA
[Specifications]·Compatible insert shape: non-ISO standard; clamp method: clamp-on (C); clamp method: clamp-on (C)
Standard Price: MYR 1,227.13- Days to Ship: 10 Day(s) -
Standard Price: MYR 121.20- Days to Ship: 4 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS Type
KYOCERA
Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.
Standard Price: MYR 1,160.95- Days to Ship: 6 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS-8 Type
KYOCERA
[Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: clamp-on (C)
Standard Price: MYR 1,160.95- Days to Ship: 10 Day(s) or more -
Grooved End Face Blade KFTB-S Type
KYOCERA
[Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 1,017.48- Days to Ship: 6 Day(s) or more -
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_b$)
Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type
KYOCERA
[Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 1,209.24- Days to Ship: 10 Day(s) or more -
Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.
Standard Price: MYR 796.61- Days to Ship: 10 Day(s) or more -
KYOCERA
P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.
Standard Price: MYR 59.33- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 929.70 Days to Ship: 10 Day(s) -
Standard Price: MYR 1,241.76 Days to Ship: 5 Day(s) or more -
T-Max Q-Cut Plunging/Grooving Shank Bit
SANDVIK
A parting-off and grooving tool that improves part production capacity by realizing high productivity and long tool lifespan
Standard Price: MYR 1,336.00 Days to Ship: 10 Day(s) -
CORO-TURN SL, Plunging and Grooving Blade for CoroCut 1/2
SANDVIK
CoroTurnSL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of items
Standard Price: MYR 987.69 Days to Ship: 10 Day(s) -
Standard Price: MYR 3,493.85 Days to Ship: 10 Day(s) -
Standard Price: MYR 1,628.73 Days to Ship: 10 Day(s) -
Standard Price: MYR 1,241.76- Days to Ship: 10 Day(s) -
Grooving Tool, Profiling Tool, And Turning Tool Blades For CoroCut 1/2 Head For Grooving
SANDVIK
1-corner and 2-corner grooving heads that are highly versatile and cover a variety of machining
Standard Price: MYR 2,692.00 Days to Ship: 10 Day(s) -
CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LF123
SANDVIK
[Features]
A high clamp rigidity type shank holder for parting and grooving.
Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
For parting and grooving.Standard Price: MYR 1,023.96- Days to Ship: 10 Day(s) -
CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LG123
SANDVIK
[Features]
A high clamp rigidity type shank holder for parting and grooving.
Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
For parting and grooving.Standard Price: MYR 1,023.96- Days to Ship: 10 Day(s) -
Short Tool Bit For QS Holding System, High Accuracy Coolant Jet Parting/Grooving Tool QS-R/LF
SANDVIK
Sandvik Grooving/Cut-Off Holder Short Bit for QS Holding System High Precision Coolant Jet QS-R/LF
Standard Price: MYR 2,145.01 Days to Ship: 10 Day(s) -
QS Series, Short Tool Bit, QS-SMALR/L1616E3HP
SANDVIK
Quick change system specially developed for small automatic lathes
A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setupStandard Price: MYR 2,048.80 Days to Ship: 10 Day(s) -
Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF123
SANDVIK
Quick change system specially developed for small automatic lathes
A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setupStandard Price: MYR 1,343.16 Days to Ship: 10 Day(s) -
T-Max, Q-Cut, Flange Grooving, 570-32R/L151.3-024/-023/A/B
SANDVIK
Parting and grooving tools that improve part production capacity by realizing high productivity and long tool life
Standard Price: MYR 1,986.46 Days to Ship: 5 Day(s) or more -
T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R/L
SANDVIK
Sandvik Grooving/cutting off holder T-Max Q-Cut SL (Type 151.3) Internal grooving, profiling blade 570-R/L
Standard Price: MYR 1,822.36- Days to Ship: 5 Day(s) or more -
CoroCut 3 SL Blade Screw Clamp For Shallow Cut-Off Machining 570-R/L 123 U/T
SANDVIK
3 corners, high productivity for shallow parting, one holder for all insert widths
Standard Price: MYR 1,023.96- Days to Ship: 10 Day(s)
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_b$)
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_b$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_b$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_b$)
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Application |
| Groove Width(mm) |
| Maximum Groove Depth(mm) |
| Selfishly |
| Maximum Machining Diameter(mm) |
| Number of corners for tip use |
| Shank height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type | Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type | Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type) | Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type) | Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type) | Multi-Functional / Grooving Holder KGM Type (For Automatic Board) | Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type | Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type | Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining) | Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole) | Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type) | Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type | Micro Groove Cutter (Twin Bar) Model STW (Circular Shank for Side Cutting Bit) | Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit) | Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA | Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type | Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type) | Grooving Tool, Profiling Tool, And Turning Tool Blades For CoroCut 1/2 Head For Grooving | CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LF123 | CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LG123 | Short Tool Bit For QS Holding System, High Accuracy Coolant Jet Parting/Grooving Tool QS-R/LF | Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF123 | T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R/L | CoroCut 3 SL Blade Screw Clamp For Shallow Cut-Off Machining 570-R/L 123 U/T | |||||||||||||||||||||
| Days to Ship | 6 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 10 Day(s) | 6 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Edge surface grooving | - | - | - | - | - | Outer Diameter Grooving / Cutting off | Edge surface grooving | Outer Diameter Grooving / Cutting off / Profiling | Outer Diameter Grooving / Cutting off / Profiling | Outer Diameter Grooving / Profiling | Outer Diameter Grooving / Cutting off | Outer Diameter Grooving / Cutting off | Inner Diameter Grooving / Profiling | Outer Diameter Grooving | Edge surface grooving | Outer Diameter Grooving / Cutting off | Outer Diameter Grooving / Cutting off | Outer Diameter Grooving / Cutting off | Edge surface grooving / Horizontal feeding | Inner Diameter Grooving / Profiling | Outer Diameter Grooving / Cutting off |
| Groove Width(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 5(6) | - | - | - | - | - | 0.7-2.0 | 5 | 5 | 1.5 | 10 ～ 12 | 1.5 | 4 ～ 15 | - | 3 | 3 | 0.5-3.18 ～ 0.5 to 3.18 | - | - | 3 | 5 ～ 8 | 1.5 |
| Maximum Groove Depth(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10.7 | 32 | 12 | 20 ～ 35 | 6.4 | 32 ～ 120 | - | 7 | 7 | 6.4 | - | - | 8.69 | 8 ～ 13 | 6.4 |
| Selfishly | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand |
| Maximum Machining Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 ～ ∞ | - | - | - | - | - | - | - | - | - | - | 12.8 | - | - | - | - | 1 | - | - | 35 | - | - |
| Number of corners for tip use | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 Corner | 1 Corner | 1 Corner | 2 Corner | 1 Corner | 3 Corner | 1 Corner / 2 Corner | 2 Corner | 2 Corner | 2 Corner | 3 Corner | 2 Corner | 3 Corner | 1 Corner | 1 Corner | 3 Corner |
| Shank height(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 | - | - | - | - | - | 12 | 25 | 32 | - | - | - | 31.9 ～ 101.6 | - | 16 ～ 20 | 16 ～ 25 | 12 ～ 16 | 16 | 10 ～ 16 | - | - | - |
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_c$)
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_c$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_c$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_c$)
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_c$)
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Application
- Outer Diameter Grooving
- Inner Diameter Grooving
- Edge surface grooving
- Cutting off
- Horizontal feeding
- Profiling
-
Groove Width(mm)
- 0.30 to 3.00
- 0.33～2.8
- 0.5-3.18
- 0.50 to 2.00
- 0.5–2.0
- 0.50～2.00
- 0.5～2.80
- 0.5 to 3.18
- 0.7-2.0
- 1～1.45
- 1.00 to 2.00
- 1.00～2.00
- 1.00 to 2.49
- 1.25～4.80
- 1.45 to 3.00
- 1.5
- 1.50 to 2.00
- 1.50～2.00
- 1.5～2.3
- 1.5～4.4
- 1.75 to 2.00
- 2
- 2.0 to 2.5
- 2.00 to 3.49
- 2.5
- 2.50 to 3.00
- 2.5 to 4.8
- 2.65
- 3
- 3.00 to 3.50
- 3.17
- 3.50 to 5.50
- 4
- 4.0–5.0
- 4.00 to 5.90
- 4.6～6.0
- 4.75
- 5
- 5(6)
- 6
- 6.00 to 7.90
- 6.35
- 8
- 8.00 to 9.00
- 9
- 10
- 10～3.0
- 11
- 12
- 15
-
Maximum Groove Depth(mm)
-
Selfishly
-
Maximum Machining Diameter(mm)
-
Number of corners for tip use
-
Shank height(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Grooving / Cutting Off Holders
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy