(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Grooving / Cutting Off Holders（Selfishly：Right-hand Page2）
| Days to Ship |
|
|---|
-
SEC-Grooved Bit (for outer diameter shallow groove) SGE Type
SUMITOMO_ELEC_
Capable of horizontal feeding (groove widening).
A clamp-on type tool bit for outer diameter grooving.Standard Price: MYR 1,122.72 Days to Ship: 4 Day(s) or more -
SEC-Grooved Bit (for outer diameter multi-functional groove, lateral feed, copying) GNDM Type
SUMITOMO_ELEC_
[Applications]It can be used for outer diameter grooving, transverse feeding, and profiling. [Features]Please use inserts for multi-functional and profiling machining when machining horizontal feeding and grooving.
Standard Price: MYR 826.47- Days to Ship: 4 Day(s) or more -
SEC-Grooved Bit (for tip surface groove) GNDF Type
SUMITOMO_ELEC_
Its outstanding cutting chip handling performance and chattering resistance ensure machining.
For face grooving.Standard Price: MYR 963.20- Days to Ship: 4 Day(s) or more -
SEC-Small Diameter Perforating Bit, SCT Type
SUMITOMO_ELEC_
Use of screw-fastening clamp method enables insert replacement merely by loosening the screw
Standard Price: MYR 534.78- Days to Ship: 4 Day(s) or more -
Sumiboron Grooved Bite BNGG Type
SUMITOMO_ELEC_
The improved rigidity provides a longer lifetime. Clamp strength improvement eliminates insert fracture and holder chatter.
Standard Price: MYR 1,234.39 Days to Ship: 4 Day(s) or more -
Outer Diameter Shallow Groove Holder KGBA Type
KYOCERA
[Features]This is a lever lock type holder that can be used for shallow grooving on outer diameters.
Standard Price: MYR 614.23- Days to Ship: 9 Day(s) or more -
Outer Diameter Shallow Groove Holder KGBAS Type
KYOCERA
A lever-lock type outer diameter shallow grooving holder.
[Shank Material]SteelStandard Price: MYR 666.66- Days to Ship: 6 Day(s) or more -
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_b$)
Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type
KYOCERA
A clamp-on type outer diameter shallow grooving holder.
[Shank Material]SteelStandard Price: MYR 614.23- Days to Ship: 10 Day(s) -
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_b$)
Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type
KYOCERA
A clamp-on type outer diameter shallow grooving holder.
[Shank Material]SteelStandard Price: MYR 666.66- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 103.73 Days to Ship: 4 Day(s) or more -
![Outer Diameter Shallow Groove Holder [for TG Chip] KTG Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304043.jpg?$product_view_b$)
Outer Diameter Shallow Groove Holder [for TG Chip] KTG Type
KYOCERA
Screw clamping type outer diameter shallow grooving holder.
Standard Price: MYR 568.45 Days to Ship: 10 Day(s) or more -
Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.
Standard Price: MYR 880.00- Days to Ship: 10 Day(s) or more -
Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)
KYOCERA
[Specifications]·Machining applications: grooving / parting-off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS
Standard Price: MYR 527.13- Days to Ship: 10 Day(s) -
Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)
KYOCERA
[Specifications]·Machining applications: grooving / parting-off; holder angle (°): 90; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS
Standard Price: MYR 793.20 Days to Ship: 10 Day(s) -
Multi-Functional / Grooving (Cutting-Off) Chip FGG Type
KYOCERA
Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.
Standard Price: MYR 131.75- Days to Ship: 6 Day(s) or more -
Lathe Turning/Cutting (Multi-Function) Bit GMM Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.
Standard Price: MYR 58.20- Days to Ship: 4 Day(s) or more -
Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.
Standard Price: MYR 37.69- Days to Ship: 10 Day(s) or more -
Multi-Functional / Grooving Holder KGM Type (For Automatic Board)
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.
Standard Price: MYR 618.26- Days to Ship: 9 Day(s) or more -
Multi-Functional / Grooving Holder KGM Type
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.
Standard Price: MYR 642.26- Days to Ship: 6 Day(s) or more -
Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type
KYOCERA
A holder for the multi-function tool "TAKINOL" series.
For outer diameter grooving and face grooving.Standard Price: MYR 878.31 Days to Ship: 10 Day(s) -
KYOCERA
A holder for the multi-function tool "TAKINOL" series.
For outer diameter relief cut grooving.Standard Price: MYR 878.31 Days to Ship: 10 Day(s) -
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type
KYOCERA
A clamp-on type outer diameter deep grooving holder.
For outer diameter deep grooving.
A right angle type.Standard Price: MYR 858.12- Days to Ship: 10 Day(s) or more -
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type
KYOCERA
A clamp-on type outer diameter deep grooving holder.
For outer diameter deep grooving.Standard Price: MYR 747.30- Days to Ship: 10 Day(s) or more -
Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 827.39- Days to Ship: 10 Day(s) or more -
Standard Price: MYR 350.77 Days to Ship: 6 Day(s) or more -
Inner Diameter Groove SIGE Type Compatible Chip
KYOCERA
B dimension: Indicates machinable groove depth.
Standard Price: MYR 91.40- Days to Ship: 4 Day(s) or more -
Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)
KYOCERA
Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.
Standard Price: MYR 1,837.78- Days to Ship: 6 Day(s) or more -
KYOCERA
Inner diameter grooving SIGE model for automatic lathes.
Standard Price: MYR 2,674.75 Days to Ship: 10 Day(s) -
Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)
KYOCERA
GIV model tip for small diameter grroving.
Standard Price: MYR 124.02- Days to Ship: 6 Day(s) or more -
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type
KYOCERA
[Specifications]·Machining applications: grooving; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integrated
Standard Price: MYR 1,118.29- Days to Ship: 10 Day(s) -
![Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304470.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type
KYOCERA
[Specifications]·Machining applications: grooving; cutting direction: right; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integrated
Standard Price: MYR 1,538.40- Days to Ship: 6 Day(s) or more -
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] KGIA Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/KGIA.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [For GIA Tip] KGIA Type
KYOCERA
[Specifications]·Machining applications: grooving; cutting direction: right; holder angle (°): 90; compatible insert: GIA insert
Standard Price: MYR 1,272.31- Days to Ship: 6 Day(s) or more -
Small Bore End Surface Slotting, EZ Bar Conforming Tip
KYOCERA
T dimension: Shows the machinable groove depth.
Standard Price: MYR 202.06- Days to Ship: 6 Day(s) or more -
Small Bore End Surface Slotting Tip Bar, Model PSFG-S (Tip Bar)
KYOCERA
The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.
Standard Price: MYR 251.09- Days to Ship: 6 Day(s) or more -
Grooved End Face Holder (Split Type) KGDF Type
KYOCERA
T dimension: Shows the machinable groove depth. (When T dimension is 20 mm or more, the maximum groove depth of the 2-corner specification tip is 18 mm.)
Standard Price: MYR 1,240.25 Days to Ship: 10 Day(s) -
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA
KYOCERA
[Specifications]·Compatible insert shape: non-ISO standard; clamp method: clamp-on (C); clamp method: clamp-on (C)
Standard Price: MYR 1,227.13- Days to Ship: 10 Day(s) -
Standard Price: MYR 90.90- Days to Ship: 6 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS Type
KYOCERA
Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.
Standard Price: MYR 1,081.95- Days to Ship: 6 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS-8 Type
KYOCERA
[Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: clamp-on (C)
Standard Price: MYR 1,240.28- Days to Ship: 10 Day(s) -
Grooved End Face Blade KFTB-S Type
KYOCERA
[Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 1,017.48- Days to Ship: 6 Day(s) or more -
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_b$)
Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type
KYOCERA
[Specifications]·Compatible insert shape: non-ISO standard; clamp method: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 1,209.24- Days to Ship: 10 Day(s) or more -
Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.
Standard Price: MYR 813.38- Days to Ship: 10 Day(s) or more -
KYOCERA
A breaker developed for cutting off, where the sharpness of an automatic lathe or similar is required. Drastically reduces remaining center part.
Standard Price: MYR 74.68- Days to Ship: 6 Day(s) or more -
KYOCERA
P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.
Standard Price: MYR 50.55- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 929.70 Days to Ship: 10 Day(s)
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_b$)
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_b$)
![Outer Diameter Shallow Groove Holder [for TG Chip] KTG Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304043.jpg?$product_view_b$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_b$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304470.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] KGIA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/KGIA.jpg?$product_view_b$)
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Application |
| Groove Width(mm) |
| Maximum Groove Depth(mm) |
| Selfishly |
| Maximum Machining Diameter(mm) |
| Number of corners for tip use |
| Shank height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK |
| Product Series | SEC-Grooved Bit (for outer diameter shallow groove) SGE Type | SEC-Grooved Bit (for outer diameter multi-functional groove, lateral feed, copying) GNDM Type | Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type | Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type | Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type) | Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type) | Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type) | Multi-Functional / Grooving Holder KGM Type (For Automatic Board) | Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type | Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type | Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type | Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining) | Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole) | Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type) | Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type | Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type | Large Inner Diameter Deep Grooved Holder [For GIA Tip] KGIA Type | Small Bore End Surface Slotting Tip Bar, Model PSFG-S (Tip Bar) | Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA | Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type | Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type) | ||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) | 10 Day(s) | 6 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) |
| Application | Outer Diameter Grooving | Outer Diameter Grooving / Horizontal feeding / Profiling | Edge surface grooving | Cutting off | Outer Diameter Grooving / Inner Diameter Grooving | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Edge surface grooving | - | - | - | - | - | - | Outer Diameter Grooving / Cutting off |
| Groove Width(mm) | 3 ～ 6 | 3 ～ 6 | 3 ～ 6 | 0.5–2.0 | 2 ～ 10～3.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 5(6) | - | - | - | - | - | - | 0.7-2.0 |
| Maximum Groove Depth(mm) | 6.2 ～ 8 | 12 ～ 18 | 12 ～ 23 | - | 4 ～ 7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Selfishly | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand |
| Maximum Machining Diameter(mm) | - | - | 45 ～ 1000 | 5~16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 ～ ∞ | - | - | - | - | - | - | - |
| Number of corners for tip use | 2 Corner | 2 Corner | 2 Corner | 2 Corner | 1 Corner | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 Corner |
| Shank height(mm) | 10 ～ 20 | 20 ～ 25 | 20 ～ 25 | 10 ～ 16 | 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 ～ 25 | - | - | - | - | - | - | 10 ～ 16 |
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_c$)
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_c$)
![Outer Diameter Shallow Groove Holder [for TG Chip] KTG Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304043.jpg?$product_view_c$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_c$)
![Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304470.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [For GIA Tip] KGIA Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/KGIA.jpg?$product_view_c$)
![Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_c$)
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Application
- Outer Diameter Grooving
- Inner Diameter Grooving
- Edge surface grooving
- Cutting off
- Horizontal feeding
- Profiling
-
Groove Width(mm)
- 0.30 to 3.00
- 0.33～2.8
- 0.5-3.18
- 0.50 to 2.00
- 0.5–2.0
- 0.50～2.00
- 0.5～2.80
- 0.5 to 3.18
- 0.7-2.0
- 1～1.45
- 1.00 to 2.00
- 1.00～2.00
- 1.00 to 2.49
- 1.25～4.80
- 1.45 to 3.00
- 1.5
- 1.50 to 2.00
- 1.50～2.00
- 1.5～2.3
- 1.5～4.4
- 1.75 to 2.00
- 2
- 2.0 to 2.5
- 2.00 to 3.49
- 2.5
- 2.50 to 3.00
- 2.5 to 4.8
- 2.65
- 3
- 3.00 to 3.50
- 3.17
- 3.50 to 5.50
- 4
- 4.0–5.0
- 4.00 to 5.90
- 4.6～6.0
- 4.75
- 5
- 5(6)
- 6
- 6.00 to 7.90
- 6.35
- 8
- 8.00 to 9.00
- 9
- 10
- 10～3.0
- 11
- 12
- 15
-
Maximum Groove Depth(mm)
-
Selfishly
-
Maximum Machining Diameter(mm)
-
Number of corners for tip use
-
Shank height(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Grooving / Cutting Off Holders
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy