(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Holding Tools for I.D. Tuning（Page3）
| Days to Ship |
|
|---|
-
SEC-Round Shank Holder, RS-SVVP Type
SUMITOMO_ELEC_
[Specifications]·Machining applications: flange; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)
Standard Price: MYR 1,373.40- Days to Ship: 8 Day(s) or more -
SEC-Round Shank Holder, RS-SVXL Type
SUMITOMO_ELEC_
[Specifications]·Machining applications: profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,464.56- Days to Ship: 8 Day(s) or more -
SEC-Pre Grinding Bit, SFT Type
SUMITOMO_ELEC_
[Specifications]·Compatible insert shape: non-ISO standard; clamp method: screw-on (S)
Standard Price: MYR 1,099.94- Days to Ship: 8 Day(s) or more -
SEC-Mini Bit, Offset 0 Holder, PTXN-X Type
SUMITOMO_ELEC_
[Specifications]·Machining applications: flange; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Standard Price: MYR 1,145.51- Days to Ship: 4 Day(s) or more -
Sumi Diamond, Small Diameter Boring Bit DABB-C
SUMITOMO_ELEC_
3 types are available for all types of machining, from general boring to relief cutting and back turning.
[Applications]
For blind holes, through holes, and back chamfering.Standard Price: MYR 779.46- Days to Ship: 5 Day(s) or more -
Sumi Diamond, Small Diameter Boring Bit DABB-N
SUMITOMO_ELEC_
3 types are available for all types of machining, from general boring to relief cutting and back turning.
[Applications]
Used for blind holes, through holes, and back chamfering.Standard Price: MYR 779.46- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 680.20- Days to Ship: 4 Day(s) or more -
Sumiboron Small Diameter Boring Bite BNB Type
SUMITOMO_ELEC_
[Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 5° (B); clamp method: clamp-on (C)
Standard Price: MYR 962.20- Days to Ship: 8 Day(s) or more -
Micro Boring Bit Model CKB (Holder)
SUMITOMO_ELEC_
Automatic lathes can be supported. High indexing precision. Insert replacement operation is simple.
Standard Price: MYR 598.58- Days to Ship: 8 Day(s) or more -
Micro Boring Bit Model CKB (Square Shank)
SUMITOMO_ELEC_
Automatic lathes can be supported. High indexing precision. Insert replacement operation is simple.
Standard Price: MYR 447.24- Days to Ship: 4 Day(s) or more -
Micro Boring Bit Model CKB (Circular Shank)
SUMITOMO_ELEC_
Automatic lathes can be supported. High indexing precision. Insert replacement operation is simple.
Standard Price: MYR 876.61- Days to Ship: 4 Day(s) or more -
Micro Boring Bit Model CKB (Circular Shank Offset Small)
SUMITOMO_ELEC_
Automatic lathes can be supported. High indexing precision. Insert replacement operation is simple.
Standard Price: MYR 986.00- Days to Ship: 8 Day(s) or more -
MANYO TOOLS
[Features]
· A rough machining boring head used with a square bit mountedStandard Price: MYR 1,042.92- Days to Ship: 9 Day(s) or more -
MANYO TOOLS
[Features]
· A rough machining boring head used with a square bit mountedStandard Price: MYR 1,042.92- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 570.27- Days to Ship: 9 Day(s) or more -
TBS Throw-away Square Bit Back Boring
MANYO TOOLS
[Features]
· Use inserts from cutting tool manufacturersStandard Price: MYR 688.44- Days to Ship: 13 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: W (hexagonal); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)
Standard Price: MYR 1,478.23 Days to Ship: 8 Day(s) or more -
EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)
DAISHOWASEIKI
[Features]
· With excellent dynamic balance, it achieves high-speed processing and stable precision.
· Automatic balance compensation.
· Accurate φ0.01 mm unit scale ultra-precision head.- CAD ：
- 2D
Standard Price: MYR 5,271.96- Days to Ship: 11 Day(s) -
EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In)
DAISHOWASEIKI
[Features]
· The internal weight can be adjusted manually by turning the balance ring.
· Manual balance adjustment mechanism. 5 μm/φ scale precision diameter adjustment mechanism (EWB2-50 only).Standard Price: MYR 6,989.48- Days to Ship: 11 Day(s) -
DAISHOWASEIKI
[Features]
· Microminiaturized, using the popular φ0.01 mm scale adjustment mechanism.
· Adjustment with only micro-quill eccentricity preserves high speed capability.
· Carbide solid straight shank enables high-rigidity machining.- CAD ：
- 2D
Standard Price: MYR 4,551.95- Days to Ship: 11 Day(s) -
RW Cartridge (for Through Holes) Cartridge Body
DAISHOWASEIKI
Well-balanced cut using 2 sheets enables heavy-duty cutting. 4 corners of the insert can be used. For roughing (for through holes).
- CAD ：
- 2D
Standard Price: MYR 620.34- Days to Ship: 9 Day(s) or more -
RW Cartridge (for Blind Holes) Cartridge Body
DAISHOWASEIKI
[Applications]It can be used for inner surface machining and can be used for dual contact BBT/BT shanks. [Features]80° two-bolt insert 2 corners can be used.
- CAD ：
- 2D
Standard Price: MYR 620.34- Days to Ship: 9 Day(s) or more -
Standard Price: MYR 737.36- Days to Ship: 7 Day(s) -
SW Cartridge (A-type for Through Holes)
DAISHOWASEIKI
[Features]
An SW cartridge for the CK boring system, type A for through holes.
4 corners of inserts can be used.
Please check the compatibility before ordering.Standard Price: MYR 1,291.81- Days to Ship: 8 Day(s) or more -
TW Cartridge (E-type for Blind Holes)
DAISHOWASEIKI
[Features]
A boring head TW cartridge, type E for blind holes.
2 corners of 80-degree diamond inserts can be used.
Please check the compatibility before ordering.Standard Price: MYR 859.44 Days to Ship: 4 Day(s) or more -
TW Boring Head (For Finishing/Round Bit Type)
DAISHOWASEIKI
High-rigidity type for roughing. Center through.
Standard Price: MYR 1,046.97 Days to Ship: 8 Day(s) -
Standard Price: MYR 537.05- Days to Ship: 7 Day(s) or more -
EZB-HP (Internal Diameter Processing)
KYOCERA
Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.
Standard Price: MYR 79.13- Days to Ship: 5 Day(s) or more -
EZB-NB (Internal Diameter Processing)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 70.40- Days to Ship: 5 Day(s) or more -
KYOCERA
Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.
Standard Price: MYR 1,145.69- Days to Ship: 6 Day(s) or more -
KYOCERA
Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.
Standard Price: MYR 824.83- Days to Ship: 6 Day(s) or more -
KYOCERA
Unique EZ adjustment structure and internal lubrication method improve dimensional accuracy and finished surface roughness.
Standard Price: MYR 611.15- Days to Ship: 6 Day(s) or more -
![VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance]](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303008_002.jpg?$product_view_b$)
VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance]
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; compatible insert relief angle: positive 7° (C); clamp method: non-ISO standard, screw-on (S)
Standard Price: MYR 115.96- Days to Ship: 6 Day(s) or more -
VNB Type (inner diameter machined)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 113.34- Days to Ship: 5 Day(s) or more -
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: non-ISO standard; clamp method: screw-on (S)
Standard Price: MYR 123.39- Days to Ship: 6 Day(s) or more -
SVN-N Type (no side stopper specifications)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: screw-on (S)
Standard Price: MYR 459.48- Days to Ship: 10 Day(s) -
SVNS-N Type (no side stopper/no stop screw specifications)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: screw-on (S)
Standard Price: MYR 528.95- Days to Ship: 6 Day(s) or more -
S...SVN-N Type (without Side Stopper, Standard Type)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: screw-on (S)
Standard Price: MYR 1,011.73- Days to Ship: 6 Day(s) or more -
S...SVN-SN Type (without Side Stopper, Same Diameter Type)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: screw-on (S)
Standard Price: MYR 1,248.40- Days to Ship: 10 Day(s) -
![VNBX-S Type (inner diameter machined) [corner R (rε) flathead tolerance]](//my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303075_002.jpg?$product_view_b$)
VNBX-S Type (inner diameter machined) [corner R (rε) flathead tolerance]
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: non-ISO standard
Standard Price: MYR 115.96- Days to Ship: 10 Day(s) or more -
SVNS-XN Type (square shaft: L type)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: V (35° two-bolt); clamp method: screw-on (S)
Standard Price: MYR 528.95- Days to Ship: 10 Day(s) or more -
S...SVN-XN Type (Round Shank, Standard Type)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: V (35° two-bolt); clamp method: screw-on (S)
Standard Price: MYR 1,011.73- Days to Ship: 10 Day(s) or more -
S...SVN-SXN Type (Round Shank, Same Diameter Type)
KYOCERA
System bar for small inner diameter boring.
Standard Price: MYR 1,169.73- Days to Ship: 10 Day(s) or more -
Small Bore Boring Twin Bar, Model STW (Round Shank for Horizontal Mount)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: screw-on (S)
Standard Price: MYR 463.11- Days to Ship: 10 Day(s) or more -
Small Bore Boring Twin Bar S..-STW Model (Round Shank for Horizontal Mount)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: non-ISO standard; clamp method: screw-on (S)
Standard Price: MYR 963.46- Days to Ship: 10 Day(s) or more
![VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303008_002.jpg?$product_view_b$)
![VNBX-S Type (inner diameter machined) [corner R (rε) flathead tolerance]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303075_002.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Applicable Tip Shape |
| Minimum Processing Diameter φA |
| Application |
| Selfishly |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank Diameter φD |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | MANYO TOOLS | SUMITOMO_ELEC_ | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In) | EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In) | VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance] | VNBX-S Type (inner diameter machined) [corner R (rε) flathead tolerance] | Small Bore Boring Twin Bar, Model STW (Round Shank for Horizontal Mount) | Small Bore Boring Twin Bar S..-STW Model (Round Shank for Horizontal Mount) | |||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 13 Day(s) or more | 8 Day(s) or more | 11 Day(s) | 11 Day(s) | 11 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 7 Day(s) | 8 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more |
| Applicable Tip Shape | - | - | - | T (Triangle) | Other | Other | W (Hexagonal Type) | T (Triangle) | - | - | Other | Other | - | - | T (Triangle) / S (Rectangular) | S (Rectangular) | W (Hexagonal Type) | T (Triangle) | T (Triangle) | W (Hexagonal Type) | S (Rectangular) | C (80° Diamond-Shape) | - | C (80° Diamond-Shape) | C (80° Diamond-Shape) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Minimum Processing Diameter φA | - | - | - | - | 3 ～ 7 | 3 ～ 7 | 2.5 ～ 8.5 | 10 ～ 22 | - | - | - | - | 50 ～ 130 | 50 ～ 130 | - | - | 5.5 | 32 ～ 85 | 1 | 15 ～ 18 | 25 ～ 125 | 25 ～ 125 | 25 ～ 100 | 20 ～ 175 | 25 | 20 | - | 2 ～ 6 | 2.5 ～ 7.5 | - | - | - | 1 ～ 4 | 2 ～ 7 | 4 ～ 5 | - | - | - | - | 1 ～ 4 | - | - | - | - | - |
| Application | - | - | - | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | - | - | - | - | - | - | Internal Diameter | Internal Diameter | Pull | - | - | - | - | Internal Diameter | - | - | - | - | - |
| Selfishly | - | - | - | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | - | - | - | - | - | - | Right-hand / Left-hand | - | - | - | - | - | - | - | - | - | - | Right-hand | Right-hand | - | - | - | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand |
| Clamp Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Screw-on | Screw-on | Screw-on | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length L1 | - | - | - | - | 60 ～ 80 | 60 ～ 80 | 40 ～ 80 | 140 ～ 180 | 125 ～ 150 | 100 ～ 125 | 80 ～ 125 | 100 ～ 125 | - | - | 80 ～ 150 | 80 ～ 140 | 100 | - | - | 144 ～ 204 | - | - | - | - | - | - | 128 ～ 157 | 32 ～ 66.1 | 32 ～ 74.2 | 120 ～ 135 | 100 ～ 135 | 80 ～ 135 | 26.5 ～ 39.8 | 26.5 ～ 49.8 | 30.8 ～ 39.8 | 100 ～ 150 | 125 ～ 150 | 80 ～ 160 | 90 ～ 100 | 26.5 ～ 39.8 | 125 ～ 150 | 80 ～ 180 | 90 ～ 125 | 85 ～ 150 | 80 ～ 125 |
| Clearance angle | - | - | - | - | 7° | - | - | - | - | - | - | - | - | - | - | - | 5° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank Diameter φD | - | - | - | - | 2.5 ～ 6 | 2.5 ～ 6 | 2 ～ 8 | 8 ～ 20 | - | - | 10 ～ 20 | 19.05 ～ 25.4 | 16 ～ 42 | 16 ～ 42 | - | - | 5 ～ 8 | - | 50 ～ 63.5 | 14 ～ 16 | - | - | - | - | - | - | 19 ～ 64 | 2 ～ 6 | 2 ～ 7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Protrusion length (L/D) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 ～ 160 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lubrication Hole Y/N | - | - | - | - | NA | NA | NA | NA | NA | NA | NA | NA | - | - | - | - | NA | Available | Available | Available | NA | NA | Available | NA | NA | Available | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![VNB-S Type (inner diameter machined) [corner R (rε) flathead tolerance]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303008_002.jpg?$product_view_c$)
![VNBX-S Type (inner diameter machined) [corner R (rε) flathead tolerance]](http://my.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303075_002.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Minimum Processing Diameter φA
- 0.3
- 0.4
- 0.5
- 0.6
- 0.9
- 1
- 1.5
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 4.5
- 5
- 5.0 mm
- 5.2
- 5.5
- 6
- 6.0 mm
- 6.2
- 6.5
- 7
- 7.2
- 7.5
- 8
- 8.0 mm
- 8.5
- 9
- 10
- 10.0 mm
- 11
- 12
- 12.0 mm
- 13
- 14
- 14.0 mm
- 14 mm
- 15
- 16
- 16 mm
- 17
- 18
- 18.0 mm
- 19
- 20
- 20 mm
- 20 mm
- 20/30
- 22
- 23
- 25
- 25 mm
- ø25
- 25/37
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 32 mm
- ø32
- 33
- 33 mm
- 34
- 35
- 37
- 38
- 39
- 40
- 40/55
- 41
- 41.5
- 43
- 44
- ø44
- 45
- 46
- 48
- 50
- 50 mm
- 50/75
- 51
- 52
- 53
- 54
- 55
- 56
- 60
- 60/75
- 61
- 62
- ø62
- 63
- 65
- 66
- 68
- 69
- 70
- 70/90
- 72
- 78
- 83
- 85
- 86
- 88
- ø88
- 90
- 94
- 98
- 99
- 100
- 105
- 106
- 118
- 123
- 125
- ø125
- 130
- 136
- 148
- 150
- 175
-
Application
-
Selfishly
-
Clamp Shape
-
Overall Length L1
-
Clearance angle
-
Shank Diameter φD
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Holding Tools for I.D. Tuning
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy