(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Holding Tools for I.D. Tuning（Lubrication Hole Y/N：Available）
| Days to Ship |
|
|---|
-
CK Boring System BT Shank Holder
DAISHOWASEIKI
[Features]
A basic holder for machining centers.
[Applications]
It can be used for a wide range of applications, from roughing to finish.Standard Price: MYR 976.30- Days to Ship: 4 Day(s) or more -
SW Boring Head (Rough Highly Rigid Type)
DAISHOWASEIKI
[Applications]It can be used for dual contact BBT/BT shanks. [Features]It is a high stiffness type for roughing and can also be used for processing flat bearing surfaces.
Standard Price: MYR 1,396.68- Days to Ship: 11 Day(s) -
A/S-SCLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 811.71- Days to Ship: 10 Day(s) -
EWN Boring Head Set (For Finishing / Insert Holder Type)
DAISHOWASEIKI
[Features]
·A 1 micron vernier is added to the easy-to-read scale of 0.01 mm/⌀.
·The pre-balanced design achieves stable machining accuracy.
·Back boring can be standardized, expanding the range of use.Standard Price: MYR 3,042.58- Days to Ship: 9 Day(s) or more -
Coromant Capto Cutting Head For Inner-Diameter Turning PCLNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,558.56- Days to Ship: 10 Day(s) -
EWN Boring Head Set (For Finishing / Round Bit Type)
DAISHOWASEIKI
[Features]
·A series of 3 types that allow you to choose the head suitable for processing.
·The micron-adjustable ultra-precision head enables difficult small-diameter boring.
·With a full lineup of carbide bit series, it is possible to quickly handle small-diameter deep hole drilling.Standard Price: MYR 3,830.93- Days to Ship: 10 Day(s) -
C/E-SCLC-A Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,853.07- Days to Ship: 6 Day(s) or more -
A-SVJP (C) (B)-AE Type Excellent Bar (Inner Spherical Surface and Interior Edge Machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 7° (C), positive 11° (P); clamp method: screw-on (S)
Standard Price: MYR 1,029.29- Days to Ship: 6 Day(s) or more -
Boring Tool Bit T-Max P Lever Clamp S...PTFNR/L
SANDVIK
T-Max P Turning Boring Bar for High Productivity, High Efficiency, and High Quality Machining
Standard Price: MYR 1,883.75- Days to Ship: 10 Day(s) -
SANDVIK
First choice for large diameter fine boring
Tool is radially adjustable to cover a wide diameter range with one tool
Tools are micrometer-precisely adjustable to meet tight machining tolerancesStandard Price: MYR 6,259.83- Days to Ship: 10 Day(s) -
Coromant Capto Cutting Head For Inner-Diameter Turning C-DTFNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,558.56- Days to Ship: 10 Day(s) -
A-SCLP-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)
Standard Price: MYR 830.45- Days to Ship: 6 Day(s) or more -
A-SDQC-AE Type Excellent Bar (Profiling)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 977.13- Days to Ship: 10 Day(s) -
E-SDQC-A Carbide Anti-Vibration Bar (Profiling)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,801.74- Days to Ship: 6 Day(s) or more -
S/A-SWUB (P)-AE Type Excellent Bar (Inner Diameter Machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole; compatible insert shape: W (hexagonal); compatible insert relief angle: positive 5° (B), positive 11° (P); clamp method: screw-on (S)
Standard Price: MYR 811.71- Days to Ship: 6 Day(s) or more -
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVUCR/L
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityStandard Price: MYR 4,086.77- Days to Ship: 10 Day(s) -
CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp, Diamond Shaped 55°
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner-diameter turning.
The low cutting resistance ensures stable machining operations.
For inner-diameter turning (bore cutting) operations.Standard Price: MYR 1,967.95- Days to Ship: 10 Day(s) -
T-Max P Inner-Diameter Boring Bit PDUNR/L
SANDVIK
First recommendation for general turning for medium to large parts
Inserts with geometries and grades for all machining areasStandard Price: MYR 3,296.96- Days to Ship: 10 Day(s) -
CoroTurn HP SL Cutting Head PCLN
SANDVIK
CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items
Standard Price: MYR 2,741.18- Days to Ship: 10 Day(s) -
CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDUCR/L-X
SANDVIK
CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items
Standard Price: MYR 2,110.48- Days to Ship: 10 Day(s) -
CoroTurn SL, Coromant Capto, Short, Inner Diameter Turning, C4/C5/C6-570-2C-R/L
SANDVIK
CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items
Standard Price: MYR 3,233.38- Days to Ship: 10 Day(s) -
Coromant Capto Cutting Head For Inner-Diameter Turning PTFNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,558.56- Days to Ship: 10 Day(s) -
Fine Boring Head, Coromant Capto / HSK
SANDVIK
Sandvik Inner Diameter Holder Fine Boring Head Coromant Capto/HSK
Standard Price: MYR 11,020.15- Days to Ship: 5 Day(s) or more -
Boring Bar For Fine Boring Head, R429.90/R249U
SANDVIK
Boring bits for indexable fine boring heads that achieve high productivity
Standard Price: MYR 1,282.11- Days to Ship: 10 Day(s) -
Holder For Inner Diameter Machining, C-SEXR
NGK SPARK PLUG
[Features]
· Diamond shape 75° positive
· Mogul bar
· Minimum machining diameter ø6
· Carbide shank (internal lubrication hole included)Standard Price: MYR 1,665.69 Days to Ship: 12 Day(s) or more -
SEC-Boring Bit, D-STUP Type (vibration resistant)
SUMITOMO_ELEC_
Steel shank type with oil hole and anti-vibration mechanism. Screw-on type. For blind hole machining
Standard Price: MYR 1,428.10- Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,655.98- Days to Ship: 8 Day(s) or more -
SUMITOMO_ELEC_
Carbide shank type with lubrication hole.
Screw-on type.
For inner diameter, through hole / flange, blind hole machining.Standard Price: MYR 1,655.98- Days to Ship: 8 Day(s) or more -
EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)
DAISHOWASEIKI
[Features]
· With excellent dynamic balance, it achieves high-speed processing and stable precision.
· Automatic balance compensation.
· Accurate φ0.01 mm unit scale ultra-precision head.- CAD ：
- 2D
Standard Price: MYR 5,271.96- Days to Ship: 11 Day(s) -
EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In)
DAISHOWASEIKI
[Features]
· The internal weight can be adjusted manually by turning the balance ring.
· Manual balance adjustment mechanism. 5 μm/φ scale precision diameter adjustment mechanism (EWB2-50 only).Standard Price: MYR 6,989.48- Days to Ship: 11 Day(s) -
DAISHOWASEIKI
[Features]
· Microminiaturized, using the popular φ0.01 mm scale adjustment mechanism.
· Adjustment with only micro-quill eccentricity preserves high speed capability.
· Carbide solid straight shank enables high-rigidity machining.- CAD ：
- 2D
Standard Price: MYR 4,551.95- Days to Ship: 11 Day(s) -
Standard Price: MYR 737.36- Days to Ship: 7 Day(s) -
TW Boring Head (For Finishing/Round Bit Type)
DAISHOWASEIKI
High-rigidity type for roughing. Center through.
Standard Price: MYR 1,046.97 Days to Ship: 8 Day(s) -
Standard Price: MYR 537.05- Days to Ship: 7 Day(s) or more -
E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter/Inner Face Machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)
Standard Price: MYR 1,756.51- Days to Ship: 6 Day(s) or more -
A-SDUC-AE Type Excellent Bar (Profiling)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,001.20- Days to Ship: 10 Day(s) or more -
E-SDUC-A Carbide Anti-Vibration Bar (Profiling)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,813.57- Days to Ship: 5 Day(s) or more -
A-SDZC-AE Excellent Bar (Boring)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,001.20- Days to Ship: 6 Day(s) or more -
E-SDZC-A Carbide Anti-Vibration Bar (for Drawing)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,924.68- Days to Ship: 10 Day(s) -
A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 787.63- Days to Ship: 6 Day(s) or more -
A/S-STLB (P)-AE Type A/S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P), positive 5° (B); clamp method: screw-on (S)
Standard Price: MYR 811.71- Days to Ship: 6 Day(s) or more -
E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: T (triangle); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)
Standard Price: MYR 1,756.51- Days to Ship: 6 Day(s) or more -
A-SVPC (B)-AE Type Excellent Bar (Undercutting and Profiling)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B), positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 880.36- Days to Ship: 6 Day(s) or more -
E-SVPC (B)-A Type Carbide Vibration-Free Bar (Undercutting and Profiling)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B), positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,955.96- Days to Ship: 10 Day(s) or more -
A-SVUC (B)-AE Type Excellent Bar (Undercutting)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B), positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,094.88- Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Applicable Tip Shape |
| Minimum Processing Diameter φA |
| Application |
| Selfishly |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank Diameter φD |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | DAISHOWASEIKI | DAISHOWASEIKI | KYOCERA | DAISHOWASEIKI | SANDVIK | DAISHOWASEIKI | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | NGK SPARK PLUG | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | DAISHOWASEIKI | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | A/S-SCLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining) | Coromant Capto Cutting Head For Inner-Diameter Turning PCLNR/L | C/E-SCLC-A Type Carbide Anti-vibration Bar (Inner Diameter / Back End Surface Machining) | A-SVJP (C) (B)-AE Type Excellent Bar (Inner Spherical Surface and Interior Edge Machining) | Coromant Capto Cutting Head For Inner-Diameter Turning C-DTFNR/L | A-SCLP-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining) | S/A-SWUB (P)-AE Type Excellent Bar (Inner Diameter Machining) | CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp, Diamond Shaped 55° | CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDUCR/L-X | CoroTurn SL, Coromant Capto, Short, Inner Diameter Turning, C4/C5/C6-570-2C-R/L | Coromant Capto Cutting Head For Inner-Diameter Turning PTFNR/L | EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In) | EWB Round Bit Boring Head (High-Speed Finishing / Manual Balance Adjustment Mechanism Built-In) | E-SCLP-A Carbide Anti-Vibration Bar (Inner Diameter/Inner Face Machining) | A-STLC-AE Type Excellent Bar (Inner Diameter / Back End Surface Machining) | A/S-STLB (P)-AE Type A/S-STLB (P)-AE Type Excellent Bar (Inner Diameter and Interior Edge Machining) | E (C)-STLB (P)-A Type Carbide Vibration-Free Bar (Inner Diameter and Interior Edge Machining) | A-SVPC (B)-AE Type Excellent Bar (Undercutting and Profiling) | E-SVPC (B)-A Type Carbide Vibration-Free Bar (Undercutting and Profiling) | ||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 11 Day(s) | 10 Day(s) | 9 Day(s) or more | 10 Day(s) | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 5 Day(s) or more | 10 Day(s) | 12 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 11 Day(s) | 11 Day(s) | 11 Day(s) | 7 Day(s) | 8 Day(s) | 7 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more |
| Applicable Tip Shape | - | - | C (80° Diamond-Shape) | T (Triangle) | C (80° Diamond-Shape) | - | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | T (Triangle) | - | T (Triangle) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | W (Hexagonal Type) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | - | T (Triangle) | T (Triangle) | T (Triangle) | Other | T (Triangle) | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | W (Hexagonal Type) | - | - | - | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) |
| Minimum Processing Diameter φA | - | 20 ～ 148 | 10 ～ 27 | 20 ～ 100 | 25 ～ 63 | 1 | 14 ～ 27 | 16 ～ 50 | 20 ～ 32 | - | 32 | 12 ～ 27 | 13 ～ 30 | 13 ～ 30 | 10 ～ 22 | 22 | 20 ～ 50 | 32 ～ 63 | 34 ～ 56 | 33 ～ 50 | 20 ～ 50 | 32 ～ 63 | 3 | 3 ～ 26 | 6.0 mm | 14 ～ 22 | 10 ～ 20 | 10 ～ 20 | 32 ～ 85 | 1 | 15 ～ 18 | 25 ～ 100 | 20 | - | 14 ～ 27 | 14 ～ 23 | 14 ～ 32 | 14 ～ 32 | 14 ～ 23 | 10 ～ 22 | 10 ～ 27 | 14 ～ 27 | 14 ～ 40 | 14 ～ 31 | 16 ～ 40 |
| Application | - | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | - | Internal Diameter | Internal Diameter | Inner diameter profiling | Inner diameter profiling | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter | Internal Diameter / Inner diameter profiling | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | Internal Diameter | - | Internal Diameter | Inner diameter profiling | Inner diameter profiling | Pull | Pull | Internal Diameter | Internal Diameter | Internal Diameter | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling |
| Selfishly | - | - | Right-hand / Left-hand | - | Right-hand / Left-hand | - | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | - | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | - | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand | - | - | - | - | - | - | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand |
| Clamp Shape | - | - | Screw-on | - | Screw-on | - | Screw-on | Screw-on | Lever lock | - | Cable clamp | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Lever lock | Lever lock | Screw-on | - | Cable clamp / Lever lock | - | Pin Lock | - | Screw-on | Screw-on | Screw-on | - | - | - | - | - | - | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on |
| Overall Length L1 | - | - | 120 ～ 250 | - | - | - | 120 ～ 300 | 150 ～ 300 | 200 ～ 300 | - | - | 140 ～ 250 | 140 ～ 250 | 105 ～ 300 | 120 ～ 200 | 200 | - | 300 ～ 350 | 28 ～ 42 | - | - | - | - | - | 90 mm | 150 ～ 250 | 100 ～ 200 | 100 ～ 200 | - | - | 144 ～ 204 | - | - | 128 ～ 157 | 90 ～ 300 | 140 ～ 200 | 105 ～ 300 | 140 ～ 250 | 160 ～ 220 | 120 ～ 200 | 120 ～ 250 | 90 ～ 300 | 140 ～ 250 | 160 ～ 300 | 150 ～ 250 |
| Clearance angle | - | - | 7° | - | - | - | 7° | 5° | - | - | 0° | 11° | - | - | 5° / 11° | 7° | - | - | - | - | - | 0° | - | - | - | 11° | 7° | 11° | - | - | - | - | - | - | 11° | 7° | 7° | 7° | 7° | - | 11° | 11° | 5° | 5° | 5° |
| Shank Diameter φD | 19 ～ 90 | - | 8 ～ 25 | - | - | - | 12 ～ 25 | 12 ～ 40 | 16 ～ 25 | - | - | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 8 ～ 20 | 16 | 16 ～ 40 | - | 25 ～ 40 | 25 ～ 40 | - | - | 12 ～ 16 | 12 ～ 20 | - | 12 ～ 20 | 8 ～ 16 | 8 ～ 16 | - | 50 ～ 63.5 | 14 ～ 16 | - | - | 19 ～ 64 | 12 ～ 25 | 10 ～ 20 | 10 ～ 25 | 10 ～ 25 | 10 ～ 16 | 8 ～ 20 | 8 ～ 25 | 10 ～ 25 | 10 ～ 32 | 10 ～ 25 | 12 ～ 32 |
| Protrusion length (L/D) | - | - | ～5.5 | - | - | - | ~7 | ～5.5 | 64 ～ 100 | - | - | ～5.5 | ～5.5 | ~7 | ～5.5 | 64 | - | 36 ～ 40 | - | - | - | - | - | - | - | - | - | - | - | - | 100 ～ 160 | - | - | - | ~7 | ～5.5 | ~7 | ～5.5 | ~7 | ～5.5 | ～5.5 | ~7 | ～5.5 | ~7 | ～5.5 |
| Lubrication Hole Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
Loading...
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Minimum Processing Diameter φA
- 0.3
- 0.4
- 0.5
- 0.6
- 0.9
- 1
- 1.5
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 4.5
- 5
- 5.0 mm
- 5.2
- 5.5
- 6
- 6.0 mm
- 6.2
- 6.5
- 7
- 7.2
- 7.5
- 8
- 8.0 mm
- 8.5
- 9
- 10
- 10.0 mm
- 11
- 12
- 12.0 mm
- 13
- 14
- 14.0 mm
- 14 mm
- 15
- 16
- 16 mm
- 17
- 18
- 18.0 mm
- 19
- 20
- 20 mm
- 20 mm
- 20/30
- 22
- 23
- 25
- 25 mm
- ø25
- 25/37
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 32 mm
- ø32
- 33
- 33 mm
- 34
- 35
- 37
- 38
- 39
- 40
- 40/55
- 41
- 41.5
- 43
- 44
- ø44
- 45
- 46
- 48
- 50
- 50 mm
- 50/75
- 51
- 52
- 53
- 54
- 55
- 56
- 60
- 60/75
- 61
- 62
- ø62
- 63
- 65
- 66
- 68
- 69
- 70
- 70/90
- 72
- 78
- 83
- 85
- 86
- 88
- ø88
- 90
- 94
- 98
- 99
- 100
- 105
- 106
- 118
- 123
- 125
- ø125
- 130
- 136
- 148
- 150
- 175
-
Application
- Internal Diameter
- Inner diameter profiling
- Pull
-
Selfishly
- Right-hand
- Left-hand
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Other
-
Overall Length L1
-
Clearance angle
- 5°
- 7°
- 20°
- 0°
- 11°
-
Shank Diameter φD
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Narrow search by specifying Manufacturer
-
- SANDVIK (126)
- KYOCERA (27)
- DAISHOWASEIKI (10)
- NGK SPARK PLUG (3)
- SUMITOMO_ELEC_ (3)
- SHOWA TOOL (0)
- MANYO TOOLS (0)
- THE_CUT (0)
CAD
-
- 2D
- 3D
Related Categories to Holding Tools for I.D. Tuning
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy