(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Holding Tools for I.D. Tuning（Applicable Tip Shape：D (55° Diamond-Shape)）
| Days to Ship |
|
|---|
-
S-SDUC-A Type Steel Bar (profile machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 755.84- Days to Ship: 6 Day(s) or more -
SW Cartridge (E-type for Blind Holes)
DAISHOWASEIKI
[Applications]It can be used for dual contact BBT/BT shanks. [Features]Balance cut and step cut can be supported simply by replacing the standard cartridge.
Standard Price: MYR 1,291.81- Days to Ship: 11 Day(s) -
A-SDQC-AE Type Excellent Bar (Profiling)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 977.13- Days to Ship: 10 Day(s) -
E-SDQC-A Carbide Anti-Vibration Bar (Profiling)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,801.74- Days to Ship: 6 Day(s) or more -
S-SDZC-A Type Steel Bar (Draw Machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 763.23- Days to Ship: 10 Day(s) or more -
CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp, Diamond Shaped 55°
SANDVIK
[Features]
An interchangeable-head-type cutting head for inner-diameter turning.
The low cutting resistance ensures stable machining operations.
For inner-diameter turning (bore cutting) operations.Standard Price: MYR 1,967.95- Days to Ship: 10 Day(s) -
T-Max P Inner-Diameter Boring Bit PDUNR/L
SANDVIK
First recommendation for general turning for medium to large parts
Inserts with geometries and grades for all machining areasStandard Price: MYR 3,296.96- Days to Ship: 10 Day(s) -
CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDUCR/L-X
SANDVIK
CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items
Standard Price: MYR 2,110.48- Days to Ship: 10 Day(s) -
CoroTurn SL Quick-Change Cutting Head 570-SDUCR/L
SANDVIK
CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items
Standard Price: MYR 4,422.33 Days to Ship: 10 Day(s) -
SUMITOMO_ELEC_
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,099.94- Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,099.94- Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,701.56- Days to Ship: 8 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)
Standard Price: MYR 1,738.02 Days to Ship: 8 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Standard Price: MYR 1,063.48- Days to Ship: 8 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Standard Price: MYR 1,136.40- Days to Ship: 8 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 648.72- Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 648.72- Days to Ship: 4 Day(s) or more -
SEC-Mini Bit Offset 0 Holder, SDPC-X Type
SUMITOMO_ELEC_
[Specifications]·Compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 374.83 Days to Ship: 8 Day(s) or more -
A-SDUC-AE Type Excellent Bar (Profiling)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,001.20- Days to Ship: 10 Day(s) or more -
E-SDUC-A Carbide Anti-Vibration Bar (Profiling)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,813.57- Days to Ship: 5 Day(s) or more -
S-SDQC-A Type Steel Bar (profile machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 755.36- Days to Ship: 10 Day(s) or more -
A-SDZC-AE Excellent Bar (Boring)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,001.20- Days to Ship: 6 Day(s) or more -
E-SDZC-A Carbide Anti-Vibration Bar (for Drawing)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,924.68- Days to Ship: 10 Day(s) -
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, flange, blind hole; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Standard Price: MYR 1,190.86- Days to Ship: 6 Day(s) or more -
A...PDUN11 Type Twin Hole Bar (Profiling: with Cutting Fluid Hole)
KYOCERA
·Boring bar for negative inserts, for DN inserts.
[Features]
·Inner Diameter / Deep End Face Processing
·Lever lockStandard Price: MYR 1,406.74- Days to Ship: 10 Day(s) or more -
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Standard Price: MYR 1,377.33- Days to Ship: 6 Day(s) or more -
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Standard Price: MYR 1,377.33- Days to Ship: 10 Day(s) -
S...PDZN15 Type (Draw Machining)
KYOCERA
[Specifications]·Machining applications: inner diameter, through hole, pull; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Standard Price: MYR 1,449.96- Days to Ship: 10 Day(s) -
CORO-TURN 107 Carbide Vibration-proof Boring Bit for Positive Tips
SANDVIK
For inner and outer diameter turning of slender parts
High repeatability insert exchange improves productivity and achieves high qualityStandard Price: MYR 4,282.85- Days to Ship: 10 Day(s) -
Standard Price: MYR 1,870.17- Days to Ship: 10 Day(s) or more -
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Standard Price: MYR 975.45- Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-SDUCR/L-R
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityStandard Price: MYR 2,455.37- Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-ERX-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For back boring machining.Standard Price: MYR 1,036.60- Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L-R
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Standard Price: MYR 975.45- Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Standard Price: MYR 975.45 Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-X
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For back boring machining.Standard Price: MYR 1,437.40 Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDQCR/L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Standard Price: MYR 975.45- Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDXCR/L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Standard Price: MYR 975.45- Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L-ER
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Standard Price: MYR 1,006.41- Days to Ship: 10 Day(s) or more -
Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SDUPR/L-ER
SANDVIK
CoroTurn 111, a true solution for eliminating vibrations in long overhangs and unstable machining conditions
Carbide boring bit for turningStandard Price: MYR 2,397.13- Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR/L-ER
SANDVIK
[Features]
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.Standard Price: MYR 4,289.35- Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR/L-ER
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations.Standard Price: MYR 987.69 Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDUPR/L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Standard Price: MYR 1,040.28- Days to Ship: 10 Day(s) -
Boring Tool Bit, CoroTurn 111, Screw Clamp, A...-SDXPR/L
SANDVIK
[Features]
An inner-diameter boring tool bit with low cutting resistance.
The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips.
The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections.
For inner-diameter turning (bore cutting) operations.Standard Price: MYR 1,040.28 Days to Ship: 10 Day(s) -
CoroTurn SL, 570 Type T-Max P, Head for Back Boring
SANDVIK
[Features]Cutting head for inner diameter turning with a replaceable head. Excellent insert clamping rigidity due to the double clamping. Quick head changes are possible, reducing downtime. Inner diameter turning operations.
Standard Price: MYR 2,395.23 Days to Ship: 10 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Applicable Tip Shape |
| Minimum Processing Diameter φA |
| Application |
| Selfishly |
| Clamp Shape |
| Overall Length L1 |
| Clearance angle |
| Shank Diameter φD |
| Protrusion length (L/D) |
| Lubrication Hole Y/N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | DAISHOWASEIKI | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp, Diamond Shaped 55° | CoroTurn SL 570 Type Cutting Head (Diamond Shape 55°), 570-SDUCR/L-X | A...PDUN11 Type Twin Hole Bar (Profiling: with Cutting Fluid Hole) | CORO-TURN 107 Carbide Vibration-proof Boring Bit for Positive Tips | Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SDUCR/L-ERX-R | ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 6 Day(s) or more | 11 Day(s) | 10 Day(s) | 6 Day(s) or more | 10 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) |
| Applicable Tip Shape | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) |
| Minimum Processing Diameter φA | 14 ～ 32 | 20 ～ 98 | 13 ～ 30 | 13 ～ 30 | 14 ～ 32 | 20 ～ 50 | 32 ～ 63 | 33 ～ 50 | - | 13 ～ 32 | 13 ～ 32 | 13 ～ 25 | 40 | 34 ～ 44 | 34 ～ 44 | 13 ～ 32 | 13 ～ 32 | - | 14 ～ 23 | 14 ～ 32 | 13 ～ 30 | 14 ～ 32 | 14 ～ 23 | 27 ～ 40 | 27 ～ 40 | 32 ～ 54 | 32 ～ 54 | 32 ～ 54 | 18 | 35 ～ 50 | 15 | 15 ～ 22 | 22 ～ 27 | 16 ～ 20 | 16 | 33 | 16 ～ 32 | 20 ～ 32 | 15 ～ 20 | 15 ～ 20 | 15 ～ 18 | - | 15 ～ 32 | 22 | 50 |
| Application | Inner diameter profiling | Internal Diameter | Inner diameter profiling | Inner diameter profiling | Pull | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Pull | Pull | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Inner diameter profiling | Pull | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling | - | Internal Diameter / Inner diameter profiling | Internal Diameter / Inner diameter profiling / Pull | Internal Diameter / Inner diameter profiling / Pull |
| Selfishly | Right-hand / Left-hand | - | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Left-hand | Left-hand |
| Clamp Shape | Screw-on | - | Screw-on | Screw-on | Screw-on | Screw-on | Lever lock | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Double Clamp | Other | Other | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Lever lock | Lever lock | Pin Lock / Lever lock | Pin Lock | Pin Lock | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | Screw-on | - | Screw-on | Screw-on | Cable clamp |
| Overall Length L1 | 140 ～ 250 | - | 140 ～ 250 | 105 ～ 300 | 140 ～ 250 | - | 300 ～ 350 | - | - | 150 ～ 250 | 150 ～ 250 | 150 ～ 250 | 300 | 200 ～ 250 | 200 ～ 250 | 150 ～ 180 | 150 ～ 180 | 100 | 140 ～ 200 | 105 ～ 300 | 140 ～ 250 | 140 ～ 250 | 160 ～ 220 | 180 ～ 250 | 180 ～ 250 | 200 ～ 300 | 200 ～ 300 | 225 ～ 325 | 150 ～ 180 | - | 125 | 150 ～ 200 | 200 ～ 250 | 150 ～ 200 | 150 | 312.2 | 150 ～ 300 | 155.1 ～ 300 | 125 ～ 200 | 150 ～ 200 | 150 ～ 180 | - | 125 ～ 300 | 204.6 | - |
| Clearance angle | 7° | - | - | - | 7° | - | - | - | 7° | 7° | 7° | 7° | 0° | 0° | 0° | 7° | 7° | - | 7° | 7° | - | 7° | 7° | - | - | - | - | - | 7° | 7° | 7° | 7° | 7° | 7° | 7° | 7° | 7° | 7° | 11° | 11° | 11° | 11° | 11° | 11° | 0° |
| Shank Diameter φD | 10 ～ 25 | - | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 16 ～ 40 | - | 25 ～ 40 | 80 | 10 ～ 25 | 10 ～ 25 | 10 ～ 20 | 32 | 25 ～ 32 | 25 ～ 32 | 10 ～ 25 | 10 ～ 25 | 10 | 10 ～ 20 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 16 | 20 ～ 32 | 20 ～ 32 | 25 ～ 40 | 25 ～ 40 | 25 ～ 40 | 12 | 25 ～ 40 | 10 | 10 ～ 16 | 16 ～ 20 | 12 ～ 16 | 12 | 25 | 12 ～ 25 | 16 ～ 25 | 10 ～ 16 | 10 ～ 16 | 10 ～ 12 | 16 | 10 ～ 25 | 16 | 40 |
| Protrusion length (L/D) | Up to 4 | - | ～5.5 | ~7 | Up to 4 | - | 36 ～ 40 | - | - | - | - | - | - | - | - | - | - | - | ～5.5 | ~7 | Up to 4 | ～5.5 | ~7 | Up to 3 | Up to 3 | Up to 3 | Up to 3 | Up to 3 | 120 | 20 ～ 22 | 15 ~ 40 | 60 ～ 96 | 24 ~ 64 ～ 80 | 18 ~ 48 ～ 24 ~ 64 | 30 ~ 80 | 15 ~ 40 | 18 ~ 48 ～ 100 | 18 ~ 48 ～ 100 | 15 ~ 40 ～ 24 ~ 64 | 60 ～ 96 | 60 ~ 100 ～ 120 | - | 15 ~ 40 ～ 37.5 ~ 100 | 24 ~ 64 | 20 |
| Lubrication Hole Y/N | NA | NA | Available | Available | NA | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | NA | Available | Available | NA | Available | Available / NA | NA | NA | NA | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | NA | - | Available | Available | Available |
Loading...
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Minimum Processing Diameter φA
- 0.3
- 0.4
- 0.5
- 0.6
- 0.9
- 1
- 1.5
- 2
- 2.5
- 3
- 3.2
- 3.5
- 4
- 4.2
- 4.5
- 5
- 5.0 mm
- 5.2
- 5.5
- 6
- 6.0 mm
- 6.2
- 6.5
- 7
- 7.2
- 7.5
- 8
- 8.0 mm
- 8.5
- 9
- 10
- 10.0 mm
- 11
- 12
- 12.0 mm
- 13
- 14
- 14.0 mm
- 14 mm
- 15
- 16
- 16 mm
- 17
- 18
- 18.0 mm
- 19
- 20
- 20 mm
- 20 mm
- 20/30
- 22
- 23
- 25
- 25 mm
- ø25
- 25/37
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 32 mm
- ø32
- 33
- 33 mm
- 34
- 35
- 37
- 38
- 39
- 40
- 40/55
- 41
- 41.5
- 43
- 44
- ø44
- 45
- 46
- 48
- 50
- 50 mm
- 50/75
- 51
- 52
- 53
- 54
- 55
- 56
- 60
- 60/75
- 61
- 62
- ø62
- 63
- 65
- 66
- 68
- 69
- 70
- 70/90
- 72
- 78
- 83
- 85
- 86
- 88
- ø88
- 90
- 94
- 98
- 99
- 100
- 105
- 106
- 118
- 123
- 125
- ø125
- 130
- 136
- 148
- 150
- 175
-
Application
- Internal Diameter
- Inner diameter profiling
- Pull
-
Selfishly
- Right-hand
- Left-hand
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Other
-
Overall Length L1
-
Clearance angle
- 5°
- 7°
- 20°
- 0°
- 11°
-
Shank Diameter φD
-
Protrusion length (L/D)
-
Lubrication Hole Y/N
Narrow search by specifying Manufacturer
-
- SANDVIK (38)
- KYOCERA (14)
- SUMITOMO_ELEC_ (9)
- DAISHOWASEIKI (1)
- SHOWA TOOL (0)
- MANYO TOOLS (0)
- NGK SPARK PLUG (0)
- THE_CUT (0)
CAD
-
- 2D
- 3D
Related Categories to Holding Tools for I.D. Tuning
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy