(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Holding Tools for O.D. Tuning（Selfishly：Left-hand）
| Days to Ship |
|
|---|
-
AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).
Standard Price: MYR 440.81- Days to Ship: 10 Day(s) -
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDJNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Standard Price: MYR 801.85 Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DDHNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
SEC-Mini Bit, SD Type (11° positive)
SUMITOMO_ELEC_
[Specifications]·Machining applications: profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 4 Day(s) or more -
WTJN-N Type (outer diameter, profile machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard
Standard Price: MYR 508.31- Days to Ship: 10 Day(s) -
SVJB-FF Type (not offset) (outer diameter, profile machining)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).
Standard Price: MYR 348.01- Days to Ship: 10 Day(s) -
SVJB Type (outer diameter, profile machining)
KYOCERA
Back surface clamping type / screw clamping type small tool holder (outer diameter).
Standard Price: MYR 440.70- Days to Ship: 10 Day(s) -
CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP
SANDVIK
Sandvik External holder CoroTurn HP Coromant Capto Cutting head for internal turning C-PCLNR/L-HP
Standard Price: MYR 2,755.45- Days to Ship: 10 Day(s) -
Holder For Outer Diameter Machining, C12/CSSN
NGK SPARK PLUG
[Features]· For SN (square) inserts· For end surface machining· Clamp-on type
Standard Price: MYR 827.98- Days to Ship: 16 Day(s) or more -
Holder For Back-Turning, DS-GTT
NGK SPARK PLUG
[Features]
DS holder for back turning.
A right-handed tip is used for the left-handed holder.
[Cutting Direction]Left hand
[Applications]
Suitable for grooving.Standard Price: MYR 1,271.10- Days to Ship: 16 Day(s) or more -
PVLN Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Standard Price: MYR 452.80 Days to Ship: 10 Day(s) -
ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7; clamp method: non-ISO standard
Standard Price: MYR 428.01- Days to Ship: 6 Day(s) or more -
SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder
KYOCERA
[Features]
·This is SDJC-FF type
[Applications]
·For small tools, general turning holders, machining of outer diameter and profilingStandard Price: MYR 348.01- Days to Ship: 6 Day(s) or more -
S...SDUC Type (External Diameter, Profiling)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,093.78- Days to Ship: 6 Day(s) or more -
S...SDLC Type (External Diameter, Copy Machining)
KYOCERA
[Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 1,081.95- Days to Ship: 6 Day(s) or more -
Shank Tool Bit, CoroTurn RC Double Clamp, DSKNR/L
SANDVIK
T-Max P series shank tool bit for highly productive outer diameter turning of large to medium-sized parts
Standard Price: MYR 833.98- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, DDJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Sandvik, T-Max P, Cutting Unit, Turning, PCRNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,018.95- Days to Ship: 10 Day(s) -
Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCRNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 1,839.41- Days to Ship: 10 Day(s) -
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityStandard Price: MYR 916.90 Days to Ship: 10 Day(s) -
Heavy Turning, Tool Bit For Negative Inserts, Coromant Capto T-Max P- Lever Clamp, PRSCR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.Standard Price: MYR 2,342.85- Days to Ship: 10 Day(s) -
Holder For Outer Diameter Machining, TTGN/WTGN
NGK SPARK PLUG
[Features]
· For TN (equilateral triangle) inserts
· Multi clampStandard Price: MYR 958.81 Days to Ship: 16 Day(s) or more -
Standard Price: MYR 1,865.64- Days to Ship: 4 Day(s) or more -
Tool Bit for SEC-Solid Sumi Boron FCLN
SUMITOMO_ELEC_
[Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)
Standard Price: MYR 812.80 Days to Ship: 4 Day(s) or more -
Tool Bit for SEC-Solid Sumi Boron FN11
SUMITOMO_ELEC_
[Specifications]·Compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: clamp-on
Standard Price: MYR 812.80 Days to Ship: 4 Day(s) or more -
Tool Bit for SEC-Solid Sumi Boron FN21
SUMITOMO_ELEC_
[Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: Negative 0° (N)
Standard Price: MYR 812.80 Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 4 Day(s) or more -
SEC-Outer Diameter Bit, DDHN Type
SUMITOMO_ELEC_
Double Clamp Type, for Outer Diameter and Profiling Milling
Standard Price: MYR 418.97- Days to Ship: 4 Day(s) or more -
SEC-Outer Diameter Bit, DVQN Type
SUMITOMO_ELEC_
Double Clamp Type, for General, Profiling, and Necking
Standard Price: MYR 557.56- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 273.63- Days to Ship: 4 Day(s) or more -
SEC-Outer Diameter Bit, MTXN Type
SUMITOMO_ELEC_
Clamp-on + Pin Lock Type, For General/End Face Cutting
Standard Price: MYR 557.56- Days to Ship: 7 Day(s) or more -
SEC-Outer Diameter Bit, PCLN Type
SUMITOMO_ELEC_
[Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)
Standard Price: MYR 712.53 Days to Ship: 7 Day(s) or more -
SEC-Outer Diameter Bit, SVPC Type
SUMITOMO_ELEC_
Screw-on type, for necking
[Features]
・ A stable clamp improves insert fracture resistance.
・ High index precision improves machining precision.
・ Insert replacement work is possible from the bottom side of the tool bit.
・ Ideal for high efficiency, intermittent, and high hardness material machining.Standard Price: MYR 374.83- Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Compatible insert shape: S (square); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 4 Day(s) or more -
SEC-Mini Bit, SD Type (7° positive)
SUMITOMO_ELEC_
[Specifications]·Machining applications: profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)
Standard Price: MYR 374.83- Days to Ship: 4 Day(s) or more -
SEC-Turning Tool Bit, CSKP Type
SUMITOMO_ELEC_
Clamp-on. For flanges.
[Features]
·Stable clamping improves wear resistance of inserts
·High index precision improves machining precision
·It is possible to replace the insert from the underside of the tool bit
·It is ideal for high-efficiency, intermittent, high-hardness material machiningStandard Price: MYR 812.80 Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
[Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)
Standard Price: MYR 418.97- Days to Ship: 4 Day(s) or more -
SEC-D Type Tool Bit DDJN Type (Cutting Direction: Left)
SUMITOMO_ELEC_
Double clamp type. For Outer Diameter and Profiling Milling
Standard Price: MYR 418.97- Days to Ship: 4 Day(s) or more -
SEC-D Type Tool Bit, DTFN Type
SUMITOMO_ELEC_
Double clamp. For flanges.
[Features]
·Stable clamping improves wear resistance of inserts
·High index precision improves machining precision
·It is possible to replace the insert from the underside of the tool bit
·It is ideal for high-efficiency, intermittent, high-hardness material machiningStandard Price: MYR 418.97- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 418.97- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 418.97- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 273.63- Days to Ship: 4 Day(s) or more -
SEC-30 Type Tool Bit ESDN Type (Cutting Direction: Left)
SUMITOMO_ELEC_
Pin lock type. For General/ Chamfering Cutting
Standard Price: MYR 273.63- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | SANDVIK | SANDVIK | SUMITOMO_ELEC_ | KYOCERA | KYOCERA | KYOCERA | SANDVIK | NGK SPARK PLUG | NGK SPARK PLUG | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | NGK SPARK PLUG | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ |
| Product Series | AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling) | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDJNR/L | SVJB-FF Type (not offset) (outer diameter, profile machining) | CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP | ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling) | SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCRNR/L | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S | Heavy Turning, Tool Bit For Negative Inserts, Coromant Capto T-Max P- Lever Clamp, PRSCR/L | ||||||||||||||||||||||||||||||||||||
| CAD |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 10 Day(s) | 10 Day(s) | 10 Day(s) | 4 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 16 Day(s) or more | 16 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 16 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Applicable Tip Shape | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | S (Rectangular) | - | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | R (Circular) | T (Triangle) | Other | C (80° Diamond-Shape) | S (Rectangular) | T (Triangle) | T (Triangle) | T (Triangle) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | T (Triangle) | T (Triangle) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | S (Rectangular) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | W (Hexagonal Type) | S (Rectangular) | S (Rectangular) |
| Applicable Chip Clearance Angle | Pozidriv | Negative | Negative | Pozidriv | Negative | Pozidriv | Pozidriv | - | - | - | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Pozidriv | - | - | Pozidriv | - | - | - | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
| Selfishly | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand | Left-hand |
| Application | Outer Diameter / Profiling | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face / Chamfer | Outer Diameter | Post-Grinding | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling | End Face | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling | Outer Diameter | Outer Diameter | Outer Diameter / End Face / Profiling | Outer Diameter / End Face | Outer Diameter | Outer Diameter / End Face | Outer Diameter | Outer Diameter | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / End Face | Outer Diameter / End Face | Outer Diameter / End Face | Outer Diameter / Profiling | Outer Diameter | Outer Diameter / End Face | Outer Diameter / Profiling | End Face | Outer Diameter / End Face | Outer Diameter / Profiling | End Face | Outer Diameter | Outer Diameter / End Face | Outer Diameter | Outer Diameter / Chamfer |
| Clamp Shape | Back Surface Clamp | Cable clamp | Cable clamp | - | Wedge Lock | Screw-on | Screw-on | Lever lock | Clamp-on | - | Pin Lock | Back Surface Clamp | Screw-on | Screw-on | Screw-on | Cable clamp | Cable clamp | Pin Lock | Cable clamp | Clamp-on | Lever lock | Clamp-on / Cable clamp | - | Clamp-on | Clamp-on | Clamp-on | Screw-on | Screw-on | Cable clamp | Cable clamp | Pin Lock | Double Clamp | Lever lock | Screw-on | - | - | - | Clamp-on | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Pin Lock | Pin Lock |
| Shank height(mm) | - | 20 | - | 10 ～ 16 | - | - | - | - | - | - | - | - | - | 13 ～ 23 | - | 32 | - | - | - | 8 | - | - | 25 | 25 | 25 | 25 | 8 ～ 20 | 10 ～ 20 | 20 ～ 25 | 20 ～ 25 | 12 ～ 25 | 20 ～ 25 | 40 | 10 ～ 25 | 10 ～ 20 | 10 ～ 20 | 8 ～ 20 | 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 12 ～ 20 | 12 ～ 25 |
| Shank width(mm) | - | 20 | - | 10 ～ 16 | - | - | - | - | - | - | - | - | - | 13 ～ 23 | - | 25 | - | - | - | - | - | - | 25 | 25 | 25 | 25 | 8 ～ 20 | 10 ～ 20 | 20 ～ 25 | 20 ～ 25 | 12 ～ 25 | 20 ～ 25 | 40 | 10 ～ 25 | 10 ～ 20 | 10 ～ 20 | 8 ～ 20 | 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 | 12 ～ 20 | 12 ～ 25 |
Loading...
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Applicable Chip Clearance Angle
- Negative
- Pozidriv
-
Selfishly
- Right-hand
- Left-hand
- No-hand
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Shank height(mm)
-
Shank width(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Holding Tools for O.D. Tuning
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy