(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Turning Inserts（Page10）
[What is turning?]
A shape is created by rotating the work material and cutting the surface while pressing the cutting edge. Processing methods can be divided into outer diameter processing, threading, inner diameter processing, and cut-off processing. The model numbers written on the insert and holder are codes unique to each tool manufacturer. Understanding how to read the model number provides basic information such as shape, type, and size. In many cases, cutting conditions are written on the label of the insert case, so check it before use.
| Days to Ship |
|
|---|
-
Standard Price: MYR 45.83- Days to Ship: 4 Day(s) or more -
55° Diamond-Shape With Hole, Negative, DNMM-HP, For Heavy Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for heavy-cutting featuring the highest cutting edge strength.Standard Price: MYR 61.44- Days to Ship: 4 Day(s) or more -
55° Diamond-Shape With Hole, Negative, DNMM-MP, For Rough Cutting
SUMITOMO_ELEC_
[Features]
· Single-sided breaker for rough cutting designed with low resistance.Standard Price: MYR 61.44- Days to Ship: 4 Day(s) or more -
55° Diamond-Shape With Hole And Wiper Edge, Negative, DNMX-SEW, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Breaker with wiper edge for new high-feed finishing.Standard Price: MYR 40.18- Days to Ship: 4 Day(s) or more -
Round-Shape With Hole, Positive 7°, RCMT-RX, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· Pocky (conical)-type round insert with excellent chip control.Standard Price: MYR 31.73- Days to Ship: 4 Day(s) or more -
Round-Shape With Hole, Positive 7°, RCMX-RP, For Rough Cutting
SUMITOMO_ELEC_
[Features]
· A standard-type breaker for profiling.Standard Price: MYR 25.75- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 95.20 Days to Ship: 6 Day(s) or more -
Replacement Blade Insert S (Square) SCGT-MN-SC
SUMITOMO_ELEC_
[Specifications] - Shape: D (55° rhombus) - Groove/hole: T (with hole) - Application (breaker): Light cutting - AC1030U uses PVD coating Absotech and special tough carbide base material - High quality cutting edge The quality suppresses welding and microchipping, achieving excellent machined surface quality.
Standard Price: MYR 48.03- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 95.20 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 75.87- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 59.59- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 75.87- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 45.08 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 56.22 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 56.22 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 30.98 Days to Ship: 4 Day(s) or more -
Square-Shape With Hole, Positive 7° SCMT-LU, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Breaker with significantly improved chip control during detailed cutting.Standard Price: MYR 30.98- Days to Ship: 4 Day(s) or more -
Square-Shape With Hole, Positive 7° SCMT-MU, For Light To Medium Cutting
SUMITOMO_ELEC_
[Features]
· Low-resistance breaker with a predictable service life.Standard Price: MYR 38.71- Days to Ship: 4 Day(s) or more -
Square-Shape With Hole, Positive 7°, SCMT-SU, For Light Cutting
SUMITOMO_ELEC_
[Features]
· General-purpose breaker with excellent sharpness.Standard Price: MYR 38.71- Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip S (Square) SENN-AFTN
SUMITOMO_ELEC_
A general-purpose cutter with a fine clear blade shape.
[Applications]
Used for cutting general-purpose and difficult-to-cut materials.Standard Price: MYR 26.50- Days to Ship: 4 Day(s) or more -
Sumi Boron Chip S (Square) SNEN-ADTR
SUMITOMO_ELEC_
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
Standard Price: MYR 481.69 Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip SNEW-ADTR
SUMITOMO_ELEC_
Insert for cutting edge replacement tool.
[Specifications]Relief angle: N (0°)
Shape: S (square)
[Applications]
Used for high speed and light cutting / general purpose cutting.Standard Price: MYR 382.43 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 54.35- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 43.98- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 45.41 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 70.30- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 43.98- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 70.30- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 48.03 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 45.41 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 45.41 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 63.31 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 50.98 Days to Ship: 4 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-HM, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· Wide-width, low-resistance, M-class breaker with right/left-handedness, for medium to rough cutting.Standard Price: MYR 39.84- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 36.89 Days to Ship: 4 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-EG, For Medium Cutting
SUMITOMO_ELEC_
[Features]
· General-purpose breaker featuring both high chip control as well as damage resistance.Standard Price: MYR 36.89- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 39.73- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 36.89- Days to Ship: 4 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-GE, For Medium Cutting
SUMITOMO_ELEC_
[Features]
· General-purpose breaker with a wear-resistant rake surface, even during high-efficiency machining.Standard Price: MYR 39.84- Days to Ship: 4 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-GU, For Medium Cutting
SUMITOMO_ELEC_
[Features]
· Wear-resistant, general-purpose breaker with low resistance.Standard Price: MYR 24.65- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 39.84 Days to Ship: 4 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-LU, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for finishing effective for chip control during cutting changes and profiling.Standard Price: MYR 36.89- Days to Ship: 4 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-ME, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for rough cutting that minimizes rake surface damage and which supports high-feed machining.Standard Price: MYR 39.84- Days to Ship: 4 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-MU, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· An economical, double-sided breaker with low resistance, suitable for high-feed machining.Standard Price: MYR 39.84- Days to Ship: 4 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-MX, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· Breaker with excellent cutting edge strength, for intermittent cutting.Standard Price: MYR 39.84- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ |
| Product Series | 55° Diamond-Shape With Hole, Negative, DNMM-HP, For Heavy Cutting | 55° Diamond-Shape With Hole, Negative, DNMM-MP, For Rough Cutting | 55° Diamond-Shape With Hole And Wiper Edge, Negative, DNMX-SEW, For Finish Cutting | Round-Shape With Hole, Positive 7°, RCMT-RX, For Medium To Rough Cutting | Round-Shape With Hole, Positive 7°, RCMX-RP, For Rough Cutting | Square-Shape With Hole, Positive 7° SCMT-LU, For Finish Cutting | Square-Shape With Hole, Positive 7° SCMT-MU, For Light To Medium Cutting | Square-Shape With Hole, Positive 7°, SCMT-SU, For Light Cutting | Square-Shape With Hole, Negative, SNMG-HM, For Medium To Rough Cutting | Square-Shape With Hole, Negative, SNMG-EG, For Medium Cutting | Square-Shape With Hole, Negative, SNMG-GE, For Medium Cutting | Square-Shape With Hole, Negative, SNMG-GU, For Medium Cutting | Square-Shape With Hole, Negative, SNMG-LU, For Finish Cutting | Square-Shape With Hole, Negative, SNMG-ME, For Medium To Rough Cutting | Square-Shape With Hole, Negative, SNMG-MU, For Medium To Rough Cutting | Square-Shape With Hole, Negative, SNMG-MX, For Medium To Rough Cutting | |||||||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Shape | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | R (Circular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | - | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) |
| work material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel | Cast Iron / Heat-resistant alloy, titanium alloy | - | Steel / Cast Iron / Non-ferrous metal | Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Cast Iron / Non-ferrous metal | Steel / Cast Iron / Non-ferrous metal | Steel | Cast Iron | Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron |
| Application | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter |
| Available corners | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Breaker Use | Medium grinding | Heavy cutting | Rough cutting | Finish | Medium to coarse grinding | Rough cutting | Finish | - | Finish | Finish | - | Finish | Finish | - | - | Finish | Finish | - | Light Cutting | - | - | - | - | - | - | Medium grinding | - | Medium grinding | - | - | - | - | - | Medium to coarse grinding | Medium grinding | Medium grinding | - | - | Medium grinding | Medium grinding | - | Finish | Medium to coarse grinding | Medium to coarse grinding | Medium to coarse grinding |
| Rake angle | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
| Nose R | 0.4 ～ 0.8 | 0.4 ～ 1.6 | 0.4 ～ 1.6 | 0.4 ～ 1.2 | - | - | 0.4 | 0.2 ～ Other | 0.4 | 0.2 ～ 0.4 | 0.2 ～ Other | 0.2 ～ 0.4 | 0.4 ～ 0.8 | 0.8 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.8 | 0.4 ～ 0.8 | - | - | - | - | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.8 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 | Other | Other | 0.8 | 0.4 ～ 1.2 | 0.4 ～ 1.6 | 0.4 ～ 1.2 | 0.8 | 0.8 ～ 1.6 | 0.4 ～ 1.6 | 0.8 ～ 1.6 | 0.8 ～ 1.2 | 0.8 ～ Other | 0.8 ～ Other | 0.8 ～ 1.6 |
| Selfishly | Right-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Left-hand | No-hand | Right-hand | Left-hand | - | Right-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | - | - | - | - | Left-hand | Left-hand | Left-hand | Right-hand | Right-hand | Left-hand | Left-hand | Right-hand | - | - | Right-hand / Left-hand | Left-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand |
| Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
-
work material
-
Application
-
Available corners
-
Breaker Use
-
Rake angle
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Turning Inserts
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy