(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Turning Inserts（Breaker Use：Finish）
[What is turning?]
A shape is created by rotating the work material and cutting the surface while pressing the cutting edge. Processing methods can be divided into outer diameter processing, threading, inner diameter processing, and cut-off processing. The model numbers written on the insert and holder are codes unique to each tool manufacturer. Understanding how to read the model number provides basic information such as shape, type, and size. In many cases, cutting conditions are written on the label of the insert case, so check it before use.
| Days to Ship |
|
|---|
-
T-Max P Negative Insert For Turning (Triangular Shaped 60°)
SANDVIK
[Features]
Carbide-coated insert
Triangular-shaped insert
Negative insert
For machining general steel and low-carbon steel
For finishingStandard Price: MYR 45.12- Days to Ship: 10 Day(s) -
Replacement Blade Insert T (Triangle) TNGG-R-FY
SUMITOMO_ELEC_
[Specifications]・Breaker symbol: FY・Shape: T (triangle)・Groove・Hole: G (with hole)・Relief angle: Negative 0° (N)・Application (breaker): Finish cutting
Standard Price: MYR 45.41- Days to Ship: 4 Day(s) or more -
35° Diamond-Shape With Hole, Positive 5°, VBMT-LU, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for finishing with significantly improved chip control during detailed cutting.Standard Price: MYR 39.16- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 58.81- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 95.56- Days to Ship: 5 Day(s) or more -
60° Triangle Negative with Hole TNGG16○○-S "Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 6
· Rake Angle: Negative
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 26.79- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Minute Incision"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 69.45- Days to Ship: 5 Day(s) or more -
CoroThread 266 Metric 60° With Finishing Blade
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For metric threads
Machining pitch: for 5.0 mmStandard Price: MYR 164.58- Days to Ship: 10 Day(s) or more -
CoroThread 266 NPT 60° NPSC, NPTR, LINEPIPE1) With Finishing Blade
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For NPT 60° threads
Machining pitch: for 18 threadsStandard Price: MYR 184.58- Days to Ship: 10 Day(s) -
Standard Price: MYR 1,653.35 Days to Ship: 10 Day(s) -
SANDVIK
[Features]
· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters
· Diamond-shaped 80° insert
· Negative insertStandard Price: MYR 65.50 Days to Ship: 10 Day(s) or more -
CoroTurn 107 Diamond Shaped 35°【1-271 Pieces Per Package】
SANDVIK
[Features]
Carbide-coated insert for outer-diameter machining of small components
Left/right handed insert
Diamond-shaped 35° insert
Positive insert
For general engineering and machining heat-resistant alloys
For finishingStandard Price: MYR 78.42- Days to Ship: 10 Day(s) -
CoroTurn 107 Positive Insert For Turning (Square Shaped 90°)
SANDVIK
[Features]
A carbide-coated insert for machining the general inner diameters and outer diameters of small components
Square-shaped insert
Positive insert
For machining stainless steel
For finishingStandard Price: MYR 64.06- Days to Ship: 10 Day(s) -
Kyocera Insert for Turning, PVD Coating PR930
KYOCERA
[Features]
· PR930: Ultra-fine particle carbide substrate and high-hardness TiCN coating for superior wear resistance.
· Supports machining steel at low speeds and precision machining of sharp cutting edges.
[Applications]
· For lathe turning
· PR930: For low-speed machining of steel and stainless steelStandard Price: MYR 34.54 Days to Ship: 10 Day(s) -
Standard Price: MYR 49.12- Days to Ship: 4 Day(s) or more -
Diamond Shape 35° / Positive With Hole VBMT
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 39.64- Days to Ship: 4 Day(s) or more -
CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade
SANDVIK
[Features]
CoroThread 266, insert for threading
Solid carbide-coated insert
Newly designed inserts with improved ease of mounting and a guide rail with high clamp rigidity
For outer-diameter threading
For 55° Whitworth threads
Machining pitch: for 5 threadsStandard Price: MYR 184.58- Days to Ship: 10 Day(s) -
T-Max P insert for turning, Square, Lathe Negative Tip, SNMA/SNMG/SNMM
SANDVIK
[Features]
Carbide-coated insert
Square-shaped insert
Negative insert
For machining general steel
For semi-finishingStandard Price: MYR 55.24- Days to Ship: 10 Day(s) -
SANDVIK
[Features]
· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters
· Hex 80° insert
· Negative insertStandard Price: MYR 71.50- Days to Ship: 10 Day(s) or more -
Kyocera Turning Insert TN620 Cermet
KYOCERA
[Features]
· TN620: Special reinforcing technology (hybrid technology) achieves both superior fracture resistance and wear resistance.
· Achieves stable machining of steel and an excellent finished surface.
[Applications]
· For lathe turning
· TN620: The foremost recommended cermet for steel machiningStandard Price: MYR 38.65- Days to Ship: 9 Day(s) or more -
Kyocera Turning Insert TN620 Cermet (VNGG/VNMG)
KYOCERA
[Features]
· TN620: Special reinforcing technology (hybrid technology) achieves both superior fracture resistance and wear resistance.
· Achieves stable machining of steel and an excellent finished surface.
[Applications]
· For lathe turning
· TN620: The foremost recommended cermet for steel machiningStandard Price: MYR 34.68- Days to Ship: 10 Day(s) -
Kyocera Turning Insert CA510 CVD Coating
KYOCERA
[Features]
· CA510: Special substrate with excellent high-temperature distortion resistance properties and a tough, thick film coating with excellent abrasion resistance.
· Supports both high-speed and high-feed machining.
[Applications]
· For lathe turning
· CA510: High-speed/high-efficiency steel machiningStandard Price: MYR 31.36- Days to Ship: 6 Day(s) or more -
Kyocera Turning Insert PV720 PVD Cermet (TPGH/TPGR/TPMT)
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningStandard Price: MYR 24.55- Days to Ship: 10 Day(s) or more -
Lathe Tip (Negative) TNGG【10 Pieces Per Package】
MISUMI
Achieves the high finish surface roughness with the use of the cermet material
Standard Price: MYR 367.36 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 57.73 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 45.41- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 57.73 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 45.41- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 75.87 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 45.41- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 75.87 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 45.41- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 54.69- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 68.88 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 45.41- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 45.41- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 59.59- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 59.59- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 24.65- Days to Ship: 4 Day(s) or more -
80° Diamond-Shape With Hole, Positive 7°, CCMT-LU, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Breaker with significantly improved chip control during detailed cutting.Standard Price: MYR 24.65- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 30.98 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 30.98- Days to Ship: 4 Day(s) or more -
80° Diamond-Shape With Hole, Negative, CNMG-EF, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for finishing with excellent chip control.Standard Price: MYR 31.73- Days to Ship: 4 Day(s) or more -
80° Diamond-Shape With Hole, Negative, CNMG-LU, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· An effective breaker for chip control during cutting changes and profiling.Standard Price: MYR 24.65- Days to Ship: 4 Day(s) or more -
80° Diamond-Shape With Hole, Negative, CNMG-SE, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for finishing made to reduce rake surface tool damage.
· Also effective for high-efficiency machining.Standard Price: MYR 31.73- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SANDVIK | SANDVIK | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | KYOCERA | SUMITOMO_ELEC_ | KYOCERA | SANDVIK | SANDVIK | SANDVIK | KYOCERA | KYOCERA | KYOCERA | KYOCERA | MISUMI | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ |
| Product Series | 35° Diamond-Shape With Hole, Positive 5°, VBMT-LU, For Finish Cutting | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Minute Incision" | CoroThread 266 NPT 60° NPSC, NPTR, LINEPIPE1) With Finishing Blade | CoroTurn 107 Positive Insert For Turning (Square Shaped 90°) | CoroThread 266 Whitworth 55° (BSW, BSF, BSP) With Finishing Blade | T-Max P insert for turning, Square, Lathe Negative Tip, SNMA/SNMG/SNMM | 80° Diamond-Shape With Hole, Positive 7°, CCMT-LU, For Finish Cutting | 80° Diamond-Shape With Hole, Negative, CNMG-EF, For Finish Cutting | 80° Diamond-Shape With Hole, Negative, CNMG-LU, For Finish Cutting | 80° Diamond-Shape With Hole, Negative, CNMG-SE, For Finish Cutting | |||||||||||||||||||||||||||||||||||
| Days to Ship | 10 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 10 Day(s) | 10 Day(s) or more | 9 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Shape | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | T (Triangle) | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | S (Rectangular) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | S (Rectangular) | - | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | T (Triangle) | S (Rectangular) | W (Hexagonal Type) | - | - | - | - | T (Triangle) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) |
| work material | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | - | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | - | - | - | - | Steel / Stainless Steel | Steel / Stainless Steel / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal |
| Application | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Threading | Threading | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Threading | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | - | - | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter |
| Available corners | 3 | - | - | 2 | 2 | 6 | 2 | 3 | 3 | 4 | 4 | 2 | 4 | - | - | 2 | 3 | 4 | 6 | - | - | - | - | 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Breaker Use | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish | Finish |
| Rake angle | Negative | Negative | Pozidriv | Negative | Negative | Negative | Pozidriv | - | - | Negative | Negative | Pozidriv | Pozidriv | - | Pozidriv | Pozidriv | - | Negative | Negative | - | - | - | - | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative |
| Nose R | 0.2 ～ 1.2 | 0.2 ～ Other | 0.2 ～ 0.8 | 0.4 ～ 1.2 | 0.8 | 0.2 ～ 0.8 | Other | - | - | 1.2 | 0.4 ～ 0.8 | 0.2 ～ Other | 0.4 ～ 0.8 | - | 0.2 ～ Other | 0.2 ～ 1.2 | - | 0.4 ～ 1.2 | 0.4 ～ 0.8 | - | - | - | - | 0.4 ～ 0.8 | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ 0.4 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.2 ～ 1.2 | 0.4 ～ 1.2 |
| Selfishly | Right-hand / No-hand | Right-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand / No-hand | No-hand | - | Left-hand | No-hand | Right-hand / Left-hand | No-hand | No-hand | - | - | - | - | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand | Right-hand | Left-hand | Left-hand | Right-hand | Right-hand | Left-hand | Right-hand | Left-hand | Right-hand | Left-hand | Right-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand |
| Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | 0.50 mm ～ 5.50 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | Outer Diameter / Internal Diameter | Outer Diameter / Internal Diameter | - | - | - | - | - | - | - | Outer Diameter / Internal Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | ISO Meter 60° | - | - | - | - | - | - | - | - | Whitworth 55° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | 8TPI ～ 27TPI | - | - | - | - | - | - | - | 4.5TPI ～ 28TPI | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
- C (80° Diamond-Shape)
- D (55° Diamond-Shape)
- R (Circular)
- S (Rectangular)
- T (Triangle)
- V (35° Diamond-Shaped)
- W (Hexagonal Type)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Medium to coarse grinding
-
Rake angle
- Negative
- Pozidriv
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
-
- KYOCERA (155)
- SUMITOMO_ELEC_ (138)
- SANDVIK (41)
- ISCAR (19)
- DIJET (0)
- ECHAIN (0)
- NOGA_JAPAN (0)
- SANWASEISAKUSYO (0)
- WIDIA (0)
- KOSHUHA (0)
- NGK SPARK PLUG (0)
- TUNGALOY (0)
- OSG (0)
- DAISHOWASEIKI (0)
CAD
-
- 2D
- 3D
Related Categories to Turning Inserts
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy