(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Turning Inserts（Rake angle：Pozidriv）
[What is turning?]
A shape is created by rotating the work material and cutting the surface while pressing the cutting edge. Processing methods can be divided into outer diameter processing, threading, inner diameter processing, and cut-off processing. The model numbers written on the insert and holder are codes unique to each tool manufacturer. Understanding how to read the model number provides basic information such as shape, type, and size. In many cases, cutting conditions are written on the label of the insert case, so check it before use.
| Days to Ship |
|
|---|
-
Standard Price: MYR 356.70- Days to Ship: 9 Day(s) or more -
Sumi Boron Chip C (80° Rhombus) 2NU-CCGW
SUMITOMO_ELEC_
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
Standard Price: MYR 262.07 Days to Ship: 4 Day(s) or more -
35° Diamond-Shape With Hole, Positive 5°, VBMT-LU, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for finishing with significantly improved chip control during detailed cutting.Standard Price: MYR 39.16- Days to Ship: 4 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Minute Incision"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 69.45- Days to Ship: 5 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 44.95- Days to Ship: 6 Day(s) or more -
60° Triangle Positive with Hole TPMT "Medium Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 23.91- Days to Ship: 4 Day(s) or more -
CoroTurn 107 Diamond Shaped 35°【1-271 Pieces Per Package】
SANDVIK
[Features]
Carbide-coated insert for outer-diameter machining of small components
Left/right handed insert
Diamond-shaped 35° insert
Positive insert
For general engineering and machining heat-resistant alloys
For finishingStandard Price: MYR 78.42- Days to Ship: 9 Day(s) or more -
CoroTurn 107 Positive Insert For Turning (Square Shaped 90°)
SANDVIK
[Features]
A carbide-coated insert for machining the general inner diameters and outer diameters of small components
Square-shaped insert
Positive insert
For machining stainless steel
For finishingStandard Price: MYR 51.68- Days to Ship: 10 Day(s) or more -
Sumi Diamond Chip V (35° Rhombus) VCMT
SUMITOMO_ELEC_
Diamond sintered insert for cutting tools developed with unique technology.
Standard Price: MYR 535.45- Days to Ship: 4 Day(s) or more -
SUMIBORON Insert, 80° Diamond-Shape With Hole, Positive 7°, 2NC-CCGW
SUMITOMO_ELEC_
[Features]
· The main component in SUMIBORON is Cubic Boron Nitride (CBN), with a special ceramic bonding material added, and sintered under super high pressure and temperature; compared with conventional tool materials, CBN features higher hardness and excellent heat-resistant properties.
· No-sharpening, single-use type for easy tool management.
· Multiple SUMIBORON pieces are brazed onto a single tool insert, resulting in a more economical unit price per cutting blade compared with single-use, 1-corner types.
· G-class precision specification that features all-around polishing. All corners are additionally marked with numbers to simplify keeping track of already-used corners.Standard Price: MYR 276.46- Days to Ship: 4 Day(s) or more -
Sumi Diamond Chip C (80° Rhombus) NF-CCMT
SUMITOMO_ELEC_
Diamond sintered insert for cutting tools developed with unique technology.
Standard Price: MYR 333.22 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 68.11- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 49.12- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 46.93 Days to Ship: 5 Day(s) or more -
Lathe Turning (1-Corner Specification) Diamond
KYOCERA
Conventional insert mounting to new holders is not recommended.
Standard Price: MYR 849.34- Days to Ship: 6 Day(s) or more -
Inner Diameter Thread Cutting Tip
KYOCERA
60° inner diameter threading insert with flat cutting blade.
Standard Price: MYR 75.77- Days to Ship: 5 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 45.84- Days to Ship: 4 Day(s) or more -
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 68.71- Days to Ship: 6 Day(s) or more -
DCGT-J, 55° rhombus, positive, with hole, turning tip
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 53.68- Days to Ship: 5 Day(s) or more -
60° Triangle Positive without Hole TPGR○○-C "Medium Cutting"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingStandard Price: MYR 52.72- Days to Ship: 4 Day(s) or more -
Diamond Shape 35° / Positive With Hole VBMT
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingStandard Price: MYR 39.64- Days to Ship: 4 Day(s) or more -
Tip for Lathe, CBN Diamond, Positive DCMT○○R/L
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 1
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· For Outer Diameter / Inner DiameterStandard Price: MYR 316.98 Days to Ship: 10 Day(s) -
Standard Price: MYR 92.24- Days to Ship: 6 Day(s) or more -
Outer Diameter Thread Cutting Tip 16ER/L○○W-TF
KYOCERA
Parallel Pipe Thread [G (PF)], Whitworth Screw (W), 55° with Flat Blade
Standard Price: MYR 54.94 Days to Ship: 6 Day(s) or more -
Outer Diameter Thread Cutting Tip 16ER/L○○W
KYOCERA
Parallel Pipe Thread [G (PF)], Whitworth Screw (W), 55° with Flat Blade
Standard Price: MYR 103.31- Days to Ship: 6 Day(s) or more -
Outer Diameter Thread Cutting Tip 16ER/L600○
KYOCERA
General Purpose 60° Screw [Supports Metric Screws, Unified Screws] No Flat Cutting Blade 60°
Standard Price: MYR 101.44 Days to Ship: 6 Day(s) or more -
Triangle-Shape With Hole, Positive 11°, TPGT○○○-AY, For Aluminum
SUMITOMO_ELEC_
[Features]
· For non-ferrous metals.Standard Price: MYR 47.68 Days to Ship: 8 Day(s) or more -
SANWASEISAKUSYO
[Features]
· Superior to other material inserts in terms of toughness and ideal for intermittent cutting and machining that does not require increased rotational speed of the workpiece.Standard Price: MYR 284.79- Days to Ship: 9 Day(s) or more -
Sumi Diamond Chip C (80° Rhombus) CPMT
SUMITOMO_ELEC_
Diamond sintered insert for cutting tools developed with unique technology.
Standard Price: MYR 477.55 Days to Ship: 4 Day(s) or more -
SUMITOMO_ELEC_
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
Standard Price: MYR 1,743.08 Days to Ship: 4 Day(s) or more -
Sumi Diamond Chip R (Round) RPGW-M
SUMITOMO_ELEC_
Diamond sintered insert for cutting tools developed with unique technology.
Standard Price: MYR 47.26- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 56.55 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 38.74 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 45.41- Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip S (Square) SPGN
SUMITOMO_ELEC_
[Specifications]
·Chip Breaker Symbol: None
·Shape: (square)
· Groove
·Holes: N (No hole)
·Relief angle: Positive 11° (P) [Grade Features]
·BN250 is a general-purpose grade that has optimized CBN sintered compact composition and improved a balance of abrasion resistance and wear resistance.
·BN500 has an excellent balance of wear resistance and abrasion resistance, so it can achieve long tool lifespan in high-speed
·and high-precision machining of high grade cast iron such as ductile cast iron in particular.
·BN500 has an excellent balance of wear resistance and abrasion resistance, so it can achieve long tool lifespan in high-speed
·and high-precision machining of high grade cast iron such as ductile cast iron in particular.
·BN700 is one of grades that have the highest hardness and toughness in the SUMIBORON series, and has balanced abrasion resistance and wear resistance when cutting sintered alloys and cast iron, etc.
·BNX20 is a grade that demonstrates its power in high-efficiency machining.
·DA150 is a grade with an excellent balance of machinability and abrasion resistance, as the diamond particles are strongly bonded to each other.
·T1200A is a cermet grade with high abrasion resistance for finishing to medium-rough cutting of general steel.Standard Price: MYR 45.08- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 39.16- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 29.12- Days to Ship: 4 Day(s) or more -
Sumi Diamond Chip T (Triangle) TBGN-B
SUMITOMO_ELEC_
Diamond sintered insert for cutting tools developed with unique technology.
Standard Price: MYR 944.89 Days to Ship: 4 Day(s) or more -
SUMIBORON Insert, 60° (Triangle-Shape), TBGN-B
SUMITOMO_ELEC_
Original CBN sintered tool (SUMIBORON) insert. Has a high hardness and excellent heat-resistant properties compared with conventional tool materials.
Standard Price: MYR 43.21- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 30.55 Days to Ship: 4 Day(s) or more -
Standard Price: MYR 44.31 Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip T (Triangle) TEGN
SUMITOMO_ELEC_
[Specifications]
·Chip Breaker Symbol: None
· Shape: T (Triangle)
· Groove
·Holes: N (No hole)
·Relief angle: Positive 20° (E) [Grade Features]
·DA150 is a grade with an excellent balance of machinability and abrasion resistance, as the diamond particles are strongly bonded to each other.
·T1200A is a cermet grade with high abrasion resistance for finishing to medium-rough cutting of general steel.Standard Price: MYR 52.50- Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip T (Triangle) TPGN
SUMITOMO_ELEC_
[Specifications]
·Chip Breaker Symbol: None
· Shape: T (Triangle)
· Groove
·Holes: N (No hole)
·Relief angle: Positive 11° (P) [Grade Features]
·BN250 is a general-purpose grade that has optimized CBN sintered compact composition and improved a balance of abrasion resistance and wear resistance.
·BN700 is one of grades that have the highest hardness and toughness in the SUMIBORON series, and has balanced abrasion resistance and wear resistance when cutting sintered alloys and cast iron, etc.
·DA150 is a grade with an excellent balance of machinability and abrasion resistance, as the diamond particles are strongly bonded to each other.
·T1200A is a cermet grade with high abrasion resistance for finishing to medium-rough cutting of general steel.Standard Price: MYR 36.89- Days to Ship: 4 Day(s) or more -
Blade Tip Replacement Tip T (Triangle) TPGW
SUMITOMO_ELEC_
[Specifications]
·Chip Breaker Symbol: None
· Shape: T (Triangle)
· Groove
·Holes: W (With holes)
·Relief angle: Positive 11° (P) [Grade Features]
·BN250 is a general-purpose grade that has optimized CBN sintered compact composition and improved a balance of abrasion resistance and wear resistance.
·BN500 has an excellent balance of wear resistance and abrasion resistance, so it can achieve long tool lifespan in high-speed
·and high-precision machining of high grade cast iron such as ductile cast iron in particular.
·BN500 has an excellent balance of wear resistance and abrasion resistance, so it can achieve long tool lifespan in high-speed
·and high-precision machining of high grade cast iron such as ductile cast iron in particular.
·BN700 is one of grades that have the highest hardness and toughness in the SUMIBORON series, and has balanced abrasion resistance and wear resistance when cutting sintered alloys and cast iron, etc.
·DA150 is a grade with an excellent balance of machinability and abrasion resistance, as the diamond particles are strongly bonded to each other.
·T1200A is a cermet grade with high abrasion resistance for finishing to medium-rough cutting of general steel.Standard Price: MYR 34.69- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 24.98- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | WIDIA | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANDVIK | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SUMITOMO_ELEC_ | SANWASEISAKUSYO | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ |
| Product Series | 35° Diamond-Shape With Hole, Positive 5°, VBMT-LU, For Finish Cutting | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Minute Incision" | Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed" | CoroTurn 107 Positive Insert For Turning (Square Shaped 90°) | SUMIBORON Insert, 80° Diamond-Shape With Hole, Positive 7°, 2NC-CCGW | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Intermediate Cutting" | 60° Triangle Positive without Hole TPGR○○-C "Medium Cutting" | Triangle-Shape With Hole, Positive 11°, TPGT○○○-AY, For Aluminum | |||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Shape | C (80° Diamond-Shape) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | T (Triangle) | V (35° Diamond-Shaped) | S (Rectangular) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | W (Hexagonal Type) | Other | T (Triangle) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | R (Circular) | C (80° Diamond-Shape) | Other | R (Circular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | S (Rectangular) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) |
| work material | Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Non-ferrous metal | Cast Iron / High Hardness Material | Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Non-ferrous metal | Steel / Stainless Steel / Non-ferrous metal | Non-ferrous metal | High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron | Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / High Hardness Material | Cast Iron | Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy |
| Application | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Grooving / Parting | Threading | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Threading | Threading | Threading | Threading | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Other | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Other | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Other | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter |
| Available corners | - | - | - | 2 | 2 | 3 | 2 | 4 | - | 2 | - | - | - | - | 1 | 3 | 2 | 2 | 2 | 3 | 2 | 1 | 3 | 3 | 3 | 3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Breaker Use | - | - | Finish | Finish | Medium grinding | Medium grinding | Finish / Medium grinding | Finish / Medium grinding | - | - | - | - | Finish | - | - | - | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Finish / Medium grinding | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Medium grinding | Medium grinding | - | - | - | - | - | - | - | Medium grinding |
| Rake angle | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv |
| Nose R | - | 0.4 | 0.2 ～ 0.8 | Other | 0.2 ～ Other | 0.2 ～ 0.8 | 0.2 ～ Other | 0.4 ～ 1.2 | 0.8 ～ 1.2 | 0.2 ～ 0.8 | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ 0.4 | 0.2 | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ 0.8 | 0.2 ～ Other | 0.4 ～ 0.8 | 0.2 ～ 1.2 | 0.2 | Other | Other | Other | 0.2 ～ Other | 0.2 ～ Other | - | 0.2 ～ 0.8 | - | - | 0.8 ～ 1.2 | 0.8 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 | 0.4 ～ 1.2 | 0.2 ～ 0.4 | 0.2 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.2 ～ 1.2 | 0.2 ～ 0.8 | 0.4 ～ 1.6 |
| Selfishly | - | - | No-hand | No-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand / No-hand | No-hand | - | No-hand | - | No-hand | Left-hand | Left-hand | No-hand | Right-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand / Left-hand | No-hand | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5–1.5 ～ 4 | - | - | - | - | - | - | 0.5 ～ 2 | - | - | 1.0–2.5 ～ 1.5–2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Internal Diameter | - | - | - | - | - | - | Internal Diameter | Outer Diameter | Outer Diameter | Outer Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | unified 60° / General Purpose 60° / Whitworth 55° / General Purpose 55° / Taper for Pipes 55° / For American Tube 60° / Trapezoid 30° | - | - | - | - | - | - | ISO Meter 60° | Whitworth 55° | Whitworth 55° | General Purpose 60° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ～ 28 | - | - | - | - | - | - | - | 19 | 11 ～ 19 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
- C (80° Diamond-Shape)
- D (55° Diamond-Shape)
- R (Circular)
- S (Rectangular)
- T (Triangle)
- V (35° Diamond-Shaped)
- W (Hexagonal Type)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Medium to coarse grinding
-
Rake angle
- Negative
- Pozidriv
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- SUMITOMO_ELEC_ (273)
- KYOCERA (153)
- SANDVIK (24)
- NGK SPARK PLUG (22)
- ISCAR (5)
- SANWASEISAKUSYO (1)
- WIDIA (1)
- DIJET (0)
- ECHAIN (0)
- NOGA_JAPAN (0)
- KOSHUHA (0)
- TUNGALOY (0)
- OSG (0)
- DAISHOWASEIKI (0)
CAD
-
- 2D
- 3D
Related Categories to Turning Inserts
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy