(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Carbide Radius End Mills（work material：Cast Iron Page2）
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
MISUMI
[Features]
·High helix angle end mill with radius for machining high hardness steel
·High tool rigidity minimizes tool tilt during side milling
·Machining of high hardness steel up to 65HRC is possible
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- Multi-Flutes （5 ~）
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
·Long neck type is ideal for deep cavity milling of deep pockets, etc.
·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Standard Price: MYR 295.47- Days to Ship: 4 Day(s) or more -
Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
MISUMI
[Features]
·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- General Steel
Days to Ship: 6 Day(s) or more -
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° radius end mill capable of high-speed and high-efficiency machining- Volume Discount
Standard Price: MYR 275.65- Days to Ship: 4 Day(s) or more -
XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model
MISUMI
Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining
- Volume Discount
Standard Price: MYR 102.86- Days to Ship: 4 Day(s) or more -
TSC Series Carbide Uneven Lead 4-Flute Radius End Mill
MISUMI
Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)
- Volume Discount
Standard Price: MYR 161.85- Days to Ship: 4 Day(s) or more -
VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
MISUMI
[Features]
·Suppresses chattering with unequal lead and unequal flutes
·Stable machining is possible while maintaining finished surface accuracy
·Cutting edge radius also reinforced cutting edge rigid
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 214.81- Days to Ship: 4 Day(s) or more -
VAC Series Carbide 2-Flute Long Neck Radius End Mill
MISUMI
[Features]
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Cutting edge radius also reinforced cutting edge rigid
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 168.79- Days to Ship: 4 Day(s) or more -
VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill
MISUMI
[Features]
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Cutting edge radius also reinforced cutting edge rigid
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 177.77- Days to Ship: 4 Day(s) or more -
GS MILL Roughing Radius GSRE-R
NACHI
Ideal for high-efficiency roughing during contour machining and corner rounding of materials from steel to stainless steel.
Standard Price: MYR 613.03 Days to Ship: 6 Day(s) or more -
NACHI
Ideal for corner rounding and high-speed contour machining of molds and machine parts.
Standard Price: MYR 341.44- Days to Ship: 5 Day(s) or more -
GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius
OSG
Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.
Standard Price: MYR 402.99 Days to Ship: 5 Day(s) or more -
CBN End Mills 2 Flutes Short with Corner Radius
OSG
2-Flute Short Corner Radius CBN-CR-EDS
·Demonstrates high performance in machining high-rigid materialsStandard Price: MYR 1,474.91- Days to Ship: 5 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)
OSG
End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.
Standard Price: MYR 387.22- Days to Ship: 5 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Standard Price: MYR 508.07- Days to Ship: 5 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Standard Price: MYR 3,975.76- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
Standard Price: MYR 698.41- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Standard Price: MYR 489.90- Days to Ship: 4 Day(s) or more -
OSG
A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.
Standard Price: MYR 400.29- Days to Ship: 5 Day(s) or more -
ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
Standard Price: MYR 439.72- Days to Ship: 5 Day(s) or more -
OSG
Ideal for high-efficiency machining of pocket engraving with the minimum required blade length and strong torsion. Overall tool length which fits shrink-fit and HSK types perfectly.
Standard Price: MYR 508.07 Days to Ship: 5 Day(s) or more -
ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)
OSG
Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.
Standard Price: MYR 505.04 Days to Ship: 5 Day(s) or more -
WXS Coated Multiple Flutes Short Super
OSG
Radius end mill for high-speed processing with high rigidity. High speed machining of hardened steel is also possible.
Standard Price: MYR 892.95- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Standard Price: MYR 792.41 Days to Ship: 4 Day(s) or more -
ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose
OSG
Capable of high-efficiency, high-precision machining of wide standing walls using step cutting
Standard Price: MYR 956.26 Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX Pencil Neck Deep-Feed Radius
OSG
Pencil neck radius end mill that achieves high-efficiency machining of deep parts that are prone to chattering and difficult-to-cut materials.
Standard Price: MYR 567.58- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX Long Neck Deep-Feed Radius
OSG
It achieves high-efficiency machining of deep parts that are prone to chattering and difficult-to-cut materials. Long neck type radius end mill.
Standard Price: MYR 542.26- Days to Ship: 5 Day(s) or more -
HLRS4000 HM Coated 4-Flute Long Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Rigidity-oriented blade shape provides long life even when machining high hardness materials
· Capable of stable machining for both dry and wet type
· New HARDMAX coating adopted to improve oxidation resistance.Standard Price: MYR 209.02- Days to Ship: 5 Day(s) or more -
HLRS2000 HM Coated 2-Flute Long Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Capable of cutting everything from raw materials to high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: MYR 176.85- Days to Ship: 5 Day(s) or more -
HRRS, HM Coated 4-Flute Short Shank Radius
UNION TOOL
[Features]
· Unique corner rounding creates larger cutting depth and pick feed than with a ball
· The seamless corner radius shape reduces cutting resistance and chattering
· High hardness materials up to 65 HRC can also be machinedStandard Price: MYR 264.88- Days to Ship: 6 Day(s) or more -
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_b$)
C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]
UNION TOOL
[Features]
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Available with an extensive lineup of corner radiiStandard Price: MYR 241.04- Days to Ship: 6 Day(s) or more -
UNION TOOL
[Features]
· Suitable for everything from raw materials to 55 HRC, the UTCOAT provides a long life
· Variable split, high torsion and positive rake angle design enables stable machining
· A blade design that reduces the cutting resistance in helical and inclined use, etc.Standard Price: MYR 294.25- Days to Ship: 6 Day(s) or more -
CRS40HSP High Efficiency 3-Flute Long Neck Radius 40° Twist
UNION TOOL
[Features]
· High Efficiency 3-Flute Long Neck Radius (Short Blade)
· 40° Torsion
· Supports materials from SUS to pre-hardened and hardened steel (60 HRC)Standard Price: MYR 394.51- Days to Ship: 9 Day(s) -
CRS20HSP High Efficiency 4-Flute Long Neck Radius 20° Twist
UNION TOOL
[Features]
· High-rigidity 4-flute radius 8 (for high-hardness materials). 20° torsion.Standard Price: MYR 267.92- Days to Ship: 9 Day(s) or more -
HGGVRX HG Coated Carbide High Helix Radius
SANKO MFG
[Features]
· HGGCNX radius type.
· Suitable for corner rounding or cutting curved surfaces.
· High efficiency machining can be achieved due to a larger contact area than with a ball end mill, which increases the pick feed.Standard Price: MYR 301.21- Days to Ship: 7 Day(s) or more -
SAGVR2T SA Coated Carbide Radius 2-Flute
SANKO MFG
[Features]
· Ideal for corner rounding or cutting curved surfaces.
· Can also be used to prevent chipped corners.Standard Price: MYR 353.87- Days to Ship: 7 Day(s) or more -
SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank
SANKO MFG
[Features]
· Suitable for corner rounding or cutting curved surfaces.
· A long shank type which allows for machining in deep sections.
· Finished surfaces can be improved and high-efficiency machining is possible.Standard Price: MYR 712.41- Days to Ship: 7 Day(s) or more -
SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank
SANKO MFG
Suitable for corner rounding or cutting curved surfaces. The long shank allows for machining in deep sections.
[Features]
· A long shank type which allows for machining in deep sections.Standard Price: MYR 623.29- Days to Ship: 7 Day(s) or more -
SCD2A End Mill with Corner R, 2-Flute, OK Coated
OKAZAKI SEIKO
The adoption of a long shank allows for corner rounding in deep sections.
Standard Price: MYR 418.93- Days to Ship: 9 Day(s) or more -
SCE4A Ultra-Strong Radius, 4-Flute, OK Coated
OKAZAKI SEIKO
A multi-function type end mill that is capable of groove milling and side milling as well as profiling.
Standard Price: MYR 418.93- Days to Ship: 14 Day(s) -
Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 532.68- Days to Ship: 7 Day(s) or more -
Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 467.50- Days to Ship: 5 Day(s) or more -
End Mill with 2 Carbide Flutes and Corner Radius KSER-2
KYOWA SEIKO
[Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 346.25- Days to Ship: 6 Day(s) or more -
End Mill with 2 Carbide Flutes and Corner Radius KSR-2
KYOWA SEIKO
[Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 311.82- Days to Ship: 6 Day(s) or more -
End Mill with 2 Carbide Flutes and Corner Radius KSRA-2
KYOWA SEIKO
[Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 406.51- Days to Ship: 6 Day(s) or more
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI | NACHI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | OKAZAKI SEIKO | OKAZAKI SEIKO | DIJET | DIJET | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO |
| Product Series | TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model | Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill | XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model | VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill | GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank) | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius | Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard) | ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation | ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard) | Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius | ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose | Micro Grain Carbide End Mills PHOENIX Pencil Neck Deep-Feed Radius | Micro Grain Carbide End Mills PHOENIX Long Neck Deep-Feed Radius | C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product] | Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners) | Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners) | |||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 14 Day(s) | 7 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Specifications |
|
|
| ||||||||||||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 12 | 4 ～ 12 | 2 ～ 20 | 3 ～ 12 | 2 ～ 20 | 2 ～ 25 | 1.5 ～ 12 | 0.4 ～ 12 | 1 ～ 12 | 6 | 3 ～ 10 | 12 | 3 ～ 6 | 0.5 ～ 2.5 | 2 ～ 4 | 16 ～ 20 | 6 ～ 20 | 3 ～ 10 | 5 ～ 13 | 3 ～ 20 | 6 | 6 | 6 ～ 25 | 8 | 10 | 2 ～ 12 | 4 ～ 16 | 0.8 ～ 6 | 0.4 ～ 6 | 2 ～ 12 | 1.5 ～ 6 | 2 ～ 12 | 2 ～ 12 | 2 ～ 12 | 4 ～ 25 | 3 ～ 20 | 6 ～ 25 | 6 ～ 25 | 4 ～ 12 | 4 ～ 12 | 6 ～ 10 | 3 ～ 20 | 1 ～ 4 | 1 ～ 6 | 0.5 ～ 3 |
| R Size(mm) | 2 | 1 ～ 2 | 0.1 ～ 3 | 0.2 ～ 1 | 0.2 ～ 3 | 0.2 ～ 6.5 | 0.2 ～ 3 | 0.1 ～ 1 | 0.2 ～ 1 | 0.5 | 0.5 | 0.5 | 0.2 ～ 2 | 0.1 | 0.5 ～ 1 | 2 | 1.5 ～ 3 | 0.2 ～ 2 | 1.2 ～ 3 | 0.2 ～ 3 | 0.5 | 0.3 | 0.2 ～ 3 | 0.3 ～ 2 | 0.5 | 0.5 ～ 2 | 1 ～ 3 | 0.05 ～ 1 | 0.05 ～ 1 | 0.3 ～ 4 | 0.2 ～ 2 | 0.3 ～ 2 | 0.1 ～ 0.5 | 0.2 ～ 1.2 | 0.5 ～ 3 | 0.5 ～ 5 | 0.3 ～ 8 | 0.3 ～ 8 | 0.2 ～ 2 | 0.5 ～ 2 | 0.5 | 0.2 ～ 1 | - | - | - |
| Blade length (ℓ)(mm) | 5 ～ 12 | 8 ～ 24 | 4 ～ 60 | 7.5 ～ 38 | 4 ～ 45 | 4 ～ 50 | 4 ～ 30 | 0.6 ～ 18 | 1.5 ～ 30 | 13 | 7.5 ～ 22 | 12 | 3 ～ 6 | 0.7 ～ 3.7 | 6 ～ 11 | 48 ～ 56 | 12 ～ 40 | 6 ～ 20 | 2 ～ 5.5 | 5 ～ 30 | 9 | 13 | 15 ～ 50 | 16 | 15 | 3 ～ 18 | 6 ～ 24 | 0.48 ～ 4.8 | 0.4 ～ 6 | 2 ～ 12 | 3 ～ 15 | 2 ～ 12 | 3 ～ 15 | 2.5 ～ 15 | 9 ～ 56 | 10 ～ 45 | 20 ～ 75 | 20 ～ 75 | 12 ～ 36 | 8 ～ 24 | 21 ～ 34 | 8 ～ 38 | 1 ～ 40 | 3 ～ 13 | 1.5 ～ 10 |
| Number of flutes(sheet) | 6 | 3 | 2 ～ 4 | 4 | 4 | 4 | 4 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 3 | 4 | 4 | 4 | 4 | 4 | 6 ～ 8 | 6 | 4 | 3 | 3 | 4 | 2 | 4 | 2 | 4 | 3 | 4 | 4 | 2 | 4 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 85 | 70 ～ 140 | 40 ～ 125 | 45 ～ 100 | 50 ～ 110 | 50 ～ 120 | 50 ～ 150 | 40 ～ 100 | 50 ～ 110 | 50 | 45 ～ 70 | 34 | 45 ～ 50 | 50 | 40 ～ 70 | 140 ～ 160 | 80 ～ 150 | 50 ～ 70 | 80 ～ 110 | 60 ～ 160 | 50 | 60 | 90 ～ 180 | 60 | 130 | 60 ～ 220 | 70 ～ 175 | 50 ～ 120 | 50 ～ 120 | 45 ～ 75 | 45 ～ 50 | 60 ～ 120 | 38 ～ 120 | 50 ～ 75 | 50 ～ 140 | 50 ～ 115 | 120 ～ 230 | 120 ～ 230 | 70 ～ 110 | 70 ～ 110 | 60 ～ 90 | 60 ～ 125 | 50 ～ 80 | 40 ～ 50 | 60 |
| work material | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] |
| Shank diameter (d)(mm) | 12 | 4 ～ 12 | 4 ～ 20 | 3 ～ 12 | 4 ～ 20 | 6 ～ 25 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 | 6 ～ 10 | 6 | 6 | 6 | 4 ～ 6 | 16 ～ 20 | 6 ～ 20 | 6 ～ 10 | 6 ～ 12 | 6 ～ 20 | 6 | 6 | 6 ～ 25 | 8 | 8 | 6 ～ 20 | 4 ～ 16 | 4 ～ 6 | 4 ～ 6 | 3 ～ 12 | 4 ～ 6 | 4 ～ 12 | 3 ～ 12 | 6 ～ 12 | 4 ～ 25 | 6 ～ 20 | 6 ～ 25 | 6 ～ 25 | 6 ～ 12 | 6 ～ 12 | 6 ～ 10 | 6 ～ 20 | 4 ～ 6 | 4 ～ 6 | 3 |
| Underneck length (ℓ1)(mm) | 17 ～ 55 | 28 ～ 90 | - | - | - | - | - | 2 ～ 50 | 4 ～ 50 | - | - | - | - | 1.5 ～ 5 | - | - | - | - | 12.5 ～ 20 | 9 ～ 60 | - | - | - | - | - | 10 ～ 160.8 | 20 ～ 120 | 2 ～ 48 | 1 ～ 60 | 6 ～ 36 | - | 6 ～ 36 | 6 ～ 54 | 5 ～ 30 | - | - | - | - | - | 15 ～ 42 | - | - | - | - | - |
| Machining Application | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Groove | Plane / Side / Groove | Side | Side / Groove | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts |
| Coating | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / Non-Coated | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | - | - | - | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | Non-Coated | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | TiCN | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | TiAlN |
| Type | radius | Long-Neck Radius | radius | radius | radius | radius | radius | Long-Neck Radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Other | - | - | - | Standard torsion (30-40°) | Standard torsion (30-40°) | No torsion | No torsion | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | No torsion | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | - | - | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| R Precision(μm) | ±0.02 | ±0.015 | ±0.02 | ±20 | ±0.02 | ±0.02 | - | - | - | - | 0～-0.030 ～ 0～-0.015 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0～+0.04 | 0～+0.04 | 0～+0.04 | 0～+0.04 | - | - | - | - | - | - | - |
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
R Size(mm)
- R0
- 0.02
- 0.03
- 0.05
- 0.1
- F0.12
- 0.15
- F0.16
- 0.2
- F0.2
- F0.24
- 0.25
- F0.28
- 0.3
- F0.32
- 0.4
- F0.4
- 0.5
- 0.5R
- 0.6
- 0.7
- 0.75
- 0.8
- 0.813
- 0.9
- 1
- 1R
- R1
- 1.1
- 1.2
- 1.219
- 1.3
- 1.4
- 1.5
- 1.5R
- R1.5
- 1.6
- 1.625
- 1.7
- 1.8
- 1.9
- 2
- 2R
- R2
- 2.031
- 2.1
- 2.2
- 2.3
- 2.4
- 2.438
- 2.465
- 2.5
- 2.5R
- R2.5
- 2.6
- 2.607
- 2.7
- 2.8
- 2.9
- 3
- R3
- 3.2
- 3.5
- 4
- R4
- 5
- R5
- 6
- R6
- 6.5
- 8
[0.1-3/0.1mm Unit(s)]
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 22
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 41
- 42
- 45
- 48
- 50
- 54
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Manufacturer
-
- OSG (17)
- UNION TOOL (11)
- KYOWA SEIKO (5)
- 7 LEADERS (4)
- SANKO MFG (4)
- NACHI (3)
- DIJET (2)
- OKAZAKI SEIKO (2)
- GUHRING (1)
- SPEED TIGER (1)
- SANDVIK (1)
- MAPAL (0)
- ATOM (0)
- VAN_HOORN (0)
- NS TOOL (0)
- TAIYO-TOOL (0)
- THE_CUT (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy