(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Carbide Radius End Mills（work material：High Hardness Steel-HRC65）
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
UNION TOOL
[Features]
· Higher speed and higher precision machining enabled by shortening the total length and reducing the protruding part of the tool
· The optimized corner radius size enables processing with larger feed than conventional
· Seamless Corner Radius Shape
· High hardness materials up to 65 HRC can also be machinedStandard Price: MYR 288.41- Days to Ship: 6 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: MYR 299.13- Days to Ship: 4 Day(s) or more -
Micro Grain Carbide End Mills WX Super Coated High-precision
OSG
High-precision bull nose (radius) end mill for shape processing of molds. High-speed cutting of hardened steel is also possible thanks to the WXS coating with excellent heat resistance.
Standard Price: MYR 224.83- Days to Ship: 5 Day(s) or more -
HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Capable of cutting everything from raw materials to high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: MYR 194.53- Days to Ship: 5 Day(s) or more -
MHRH230R MUGEN-COATING PREMIUM 2-Flute Long Neck Radius End Mill for Hardened Steels
NS TOOL
The Infinity Coating Premium for high hardness materials and new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface
Standard Price: MYR 203.66- Days to Ship: 10 Day(s) -
MISUMI
Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: MYR 594.78- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: MYR 373.97- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: MYR 374.66- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: MYR 388.69- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Standard Price: MYR 315.37- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
MISUMI
[Features]
·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
Standard Price: MYR 234.06- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Standard Price: MYR 230.50- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
MISUMI
[Features]
·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: MYR 314.36- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
MISUMI
Long neck type with interference prevention can be selected from a number of effective lengths
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: MYR 335.87- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
MISUMI
By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Standard Price: MYR 337.53- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Taper neck is effective in suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Standard Price: MYR 365.95- Days to Ship: 4 Day(s) or more -
MISUMI
The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Standard Price: MYR 361.06- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·High helix angle end mill with radius for machining high hardness steel
·High tool rigidity minimizes tool tilt during side milling
·Machining of high hardness steel up to 65HRC is possible
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- Multi-Flutes （5 ~）
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
·Long neck type is ideal for deep cavity milling of deep pockets, etc.
·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Standard Price: MYR 295.47- Days to Ship: 4 Day(s) or more -
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° radius end mill capable of high-speed and high-efficiency machining- Volume Discount
Standard Price: MYR 275.65- Days to Ship: 4 Day(s) or more -
CBN End Mills 2 Flutes Short with Corner Radius
OSG
2-Flute Short Corner Radius CBN-CR-EDS
·Demonstrates high performance in machining high-rigid materialsStandard Price: MYR 1,474.91- Days to Ship: 5 Day(s) or more -
OSG
A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.
Standard Price: MYR 400.29- Days to Ship: 5 Day(s) or more -
WXS Coated Multiple Flutes Short Super
OSG
Radius end mill for high-speed processing with high rigidity. High speed machining of hardened steel is also possible.
Standard Price: MYR 892.95- Days to Ship: 5 Day(s) or more -
HLRS4000 HM Coated 4-Flute Long Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Rigidity-oriented blade shape provides long life even when machining high hardness materials
· Capable of stable machining for both dry and wet type
· New HARDMAX coating adopted to improve oxidation resistance.Standard Price: MYR 209.02- Days to Ship: 5 Day(s) or more -
HLRS2000 HM Coated 2-Flute Long Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Capable of cutting everything from raw materials to high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: MYR 176.85- Days to Ship: 5 Day(s) or more -
HRRS, HM Coated 4-Flute Short Shank Radius
UNION TOOL
[Features]
· Unique corner rounding creates larger cutting depth and pick feed than with a ball
· The seamless corner radius shape reduces cutting resistance and chattering
· High hardness materials up to 65 HRC can also be machinedStandard Price: MYR 264.88- Days to Ship: 6 Day(s) or more -
SSR200 CBN Super Speed Radius End Mill
NS TOOL
Achieves high-efficiency machining of corner radius due to outstanding CBN durability
Standard Price: MYR 746.41- Days to Ship: 10 Day(s) or more -
MHDH445R 4-Flute Radius-End Mill for High-Hardness
NS TOOL
Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC)
Standard Price: MYR 489.58- Days to Ship: 5 Day(s) or more -
MSTNR230 MUGEN-COATING Long Tapered Neck Radius End Mill
NS TOOL
Suppresses chattering for stable high-speed cutting and improved finish surfaces for everything from semi-rough to high-precision finish machining
Standard Price: MYR 295.71- Days to Ship: 5 Day(s) or more -
CPRS25NSP Two-Flute Long-Neck Radius for Processing Aluminum/Resin, 25° Torsion
UNION TOOL
[Features]
· For Machining Aluminum/Resin
· Non-coated, R0.1 corner radius, long-neck radius
· Subtle corner rounding suppresses lasting bottom cutter marksStandard Price: MYR 250.54- Days to Ship: 9 Day(s) or more -
Power Radius End Mill MSXH440R
NS TOOL
Adopts powered-up unequal leads and large unequal divisions to suppress chatter and realize stable machining
Standard Price: MYR 275.76- Days to Ship: 4 Day(s) or more -
MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels
NS TOOL
Superior surface finish with excellent chipping prevention and reduced chattering due to the use of MUGEN coating for hardened steels and a new shape
Standard Price: MYR 233.95- Days to Ship: 4 Day(s) or more -
MHR430R MUGEN-COATING 4-Flute Long Neck Radius End Mill
NS TOOL
Design dedicated for short blade length. Suppresses chatter by further reducing workpiece contact
Standard Price: MYR 271.66- Days to Ship: 10 Day(s) -
MHDH645R 6-Flute Radius-End Mill for High-Hardness
NS TOOL
Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC)
Standard Price: MYR 570.85- Days to Ship: 5 Day(s) or more -
OSG
The three-dimensional negative shape of the R section provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.
Standard Price: MYR 799.69- Days to Ship: 5 Day(s) or more -
CBN End Mills 2Flutes Long Neck Radius
OSG
The CBN construction enables high-efficiency and high-precision machining, and fewer tool changes make continuous machining possible, leading to cost reductions.
Standard Price: MYR 900.98- Days to Ship: 5 Day(s) or more -
CBN 2-Flute Corner Radius End Mill SBRE-2
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
It is possible to increase the depth of cut.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: MYR 1,017.75- Days to Ship: 6 Day(s) or more -
CBN 2-Flute Corner Radius End Mill SBREF-2
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
It is possible to increase the depth of cut.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: MYR 974.70- Days to Ship: 6 Day(s) or more -
CBN 3-Flute Corner Radius End Mill SBRE-3
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
High-efficiency machining is possible with high feed.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: MYR 1,753.83- Days to Ship: 6 Day(s) or more -
CBN 3-Flute Corner Radius End Mill SBREF-3
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
High-efficiency machining is possible with high feed.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: MYR 1,146.89- Days to Ship: 6 Day(s) or more -
TiAlN Coat, Carbide long neck radius end mill, 2 flutes
VAN_HOORN
[Features]
· Micro end mill ideal for machining deep ribs in materials up to HRC 55, available from 0.1 mm blade diameter up.
· A long product life is achieved with new generation TiAlN coating and a newly designed blade tip shape.
· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)Standard Price: MYR 202.61- Days to Ship: 4 Day(s) or more -
TiAlN Coat, Carbide long neck radius end mill, 4 flutes
VAN_HOORN
[Features]
· Micro end mill ideal for machining deep ribs in materials up to HRC 55.
· 4-flute blade with a small blade diameter of 0.2 mm up is achieved. Compared to 2-flute type, this model has higher rigidity, longer tool service life, and achieves more efficient machining.
· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)Standard Price: MYR 219.23- Days to Ship: 4 Day(s) or more -
Carbide 2-Flute Long-Neck Radius CBN-LR
UNION TOOL
[Features]
· Adopts a CBN material ideal for machining high-hardness materials such as HSS.
· Excellent abrasion resistance maintains excellent machined surface roughness, even over long periods of machining.Standard Price: MYR 1,789.97- Days to Ship: 11 Day(s) -
SHR320 CBN High Efficiency Radius End Mill
NS TOOL
[Features]
· 3 flutes and spiral-shaped corner R provide high accuracy and high efficiency machining.Standard Price: MYR 905.57- Days to Ship: 11 Day(s) -
Solid Carbide Square End Mill For High Hardness (5 Flutes) IC5HSVR
THE_CUT
[Features]
· Employs a special coating with excellent wear and heat resistance, good smoothness and non-welding properties.
· Can be used for a wide range of machining from raw materials through to difficult-to-cut materials.
· The innovative blade shape, the use of the hardest form of carbide and the special coating all combine to allow for high speeds and high feed rates.Standard Price: MYR 695.06- Days to Ship: 7 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | UNION TOOL | MISUMI | OSG | UNION TOOL | NS TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | OSG | OSG | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | VAN_HOORN | VAN_HOORN | UNION TOOL | NS TOOL | THE_CUT |
| Product Series | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | Micro Grain Carbide End Mills WX Super Coated High-precision | HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius | MHRH230R MUGEN-COATING PREMIUM 2-Flute Long Neck Radius End Mill for Hardened Steels | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model | TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model | TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model | TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model | TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model | CPRS25NSP Two-Flute Long-Neck Radius for Processing Aluminum/Resin, 25° Torsion | MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels | Solid Carbide Square End Mill For High Hardness (5 Flutes) IC5HSVR | ||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Days to Ship | 6 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) | 11 Day(s) | 7 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 2 ～ 12 | 2 ～ 12 | 0.4 ～ 4 | 0.2 ～ 6 | 0.2 ～ 0.9 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 2 ～ 12 | 3 ～ 12 | 2 ～ 12 | 2 ～ 20 | 4 ～ 16 | 3 ～ 12 | 3 ～ 6 | 2 ～ 6 | 12 | 4 ～ 12 | 3 ～ 12 | 3 ～ 6 | 5 ～ 13 | 6 ～ 25 | 0.8 ～ 6 | 0.4 ～ 6 | 2 ～ 12 | 0.2 ～ 2 | 3 ～ 4 | 0.2 ～ 3 | 2 ～ 12 | 3 ～ 12 | 1 ～ 6 | 1 ～ 6 | 5 ～ 12 | 0.5 ～ 3 | 0.5 ～ 3 | 0.3 ～ 6 | 0.3 ～ 3 | 3 ～ 6 | 0.3 ～ 2 | 0.1 ～ 2.5 | 0.4 ～ 2 | 0.6 ～ 0.8 | 0.5 ～ 2 | 6 ～ 16 |
| R Size(mm) | 0.3 ～ 4 | 0.5 ～ 2 | 0.05 ～ 0.5 | 0.05 ～ 1 | 0.05 ～ 0.2 | 0.813 ～ 2.438 | 0.813 ～ 2.607 | 0.813 ～ 2.438 | 0.813 ～ 2.438 | 0.5 ～ 2 | 0.75 ～ 3 | 0.5 ～ 2 | 0.5 ～ 3 | 1 ～ 3 | 0.8 ～ 2 | 0.8 ～ 1.5 | 0.2 ～ 0.5 | 2 | 1 ～ 2 | 0.2 ～ 1 | 0.2 ～ 2 | 1.2 ～ 3 | 0.2 ～ 3 | 0.05 ～ 1 | 0.05 ～ 1 | 0.3 ～ 4 | 0.02 ～ 0.5 | 0.2 ～ 0.5 | 0.05 ～ 0.5 | 0.1 | 0.3 ～ 3 | 0.05 ～ 1 | 0.05 ～ 1 | 0.2 ～ 2 | 0.05 ～ 0.5 | 0.05 ～ 0.5 | - | - | - | - | 0.03 ～ 0.2 | 0.05 ～ 0.2 | 0.02 ～ 0.05 | 0.1 ～ 0.3 | 0.5 ～ 2 |
| Blade length (ℓ)(mm) | 2 ～ 12 | 4 ～ 24 | 0.3 ～ 4 | 0.2 ～ 6 | 0.15 ～ 0.7 | 8 ～ 24 | 8 ～ 40 | 8 ～ 24 | 8 ～ 24 | 2 ～ 12 | 1.2 ～ 5 | 2 ～ 12 | 4 ～ 40 | 6 ～ 24 | 4.5 ～ 18 | 4.5 ～ 9 | 3 ～ 9 | 5 ～ 12 | 8 ～ 24 | 7.5 ～ 38 | 3 ～ 6 | 2 ～ 5.5 | 15 ～ 50 | 0.48 ～ 4.8 | 0.4 ～ 6 | 2 ～ 12 | 0.08 ～ 1.2 | 6 ～ 8 | 0.15 ～ 2.5 | 3 ～ 16 | 8 ～ 26 | 0.8 ～ 5 | 0.8 ～ 5 | 10 ～ 24 | 0.3 ～ 1.8 | 0.3 ～ 1.8 | 0.3 ～ 2 | 0.3 ～ 2 | 1.5 ～ 2 | 0.5 ～ 1.5 | 0.2 ～ 3 | 0.6 ～ 3 | 0.3 ～ 0.56 | 0.25 ～ 1 | 17 ～ 45 |
| Number of flutes(sheet) | 4 | 3 | 2 ～ 4 | 2 | 2 | 3 | 4 | 3 | 4 | 3 | 4 | 4 | 4 | 4 | 3 | 4 | 4 | 6 | 3 | 4 | 2 | 4 | 6 ～ 8 | 4 | 2 | 4 | 2 | 4 | 2 | 2 | 4 | 4 | 4 | 6 | 2 | 2 | 2 | 2 | 3 | 3 | 2 | 4 | 2 | - | 5 |
| Overall Length (L)(mm) | 70 ～ 120 | 50 ～ 100 | 50 ～ 70 | 50 ～ 100 | 45 ～ 50 | 50 ～ 100 | 50 ～ 150 | 80 ～ 160 | 80 ～ 160 | 50 ～ 100 | 60 ～ 110 | 50 ～ 100 | 50 ～ 130 | 70 ～ 180 | 80 ～ 160 | 80 ～ 110 | 50 | 85 | 70 ～ 140 | 45 ～ 100 | 45 ～ 50 | 80 ～ 110 | 90 ～ 180 | 50 ～ 120 | 50 ～ 120 | 45 ～ 75 | 48 ～ 53 | 60 | 50 ～ 110 | 38 ～ 90 | 60 ～ 80 | 50 ～ 110 | 50 ～ 110 | 60 ～ 80 | 45 ～ 50 | 45 ～ 50 | 50 ～ 60 | 50 ～ 60 | 50 ～ 70 | 50 | 64 | 64 | 45 | 50 ～ 52 | 60 ～ 110 |
| work material | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[○] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC65[○] |
| Shank diameter (d)(mm) | 3 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 16 | 6 ～ 16 | 6 ～ 8 | 6 | 12 | 4 ～ 12 | 3 ～ 12 | 6 | 6 ～ 12 | 6 ～ 25 | 4 ～ 6 | 4 ～ 6 | 3 ～ 12 | 4 | 6 | 4 ～ 6 | 3 ～ 12 | 6 ～ 12 | 4 ～ 6 | 4 ～ 6 | 6 ～ 12 | 4 ～ 6 | 4 ～ 6 | 6 | 4 | 6 | 4 | 4 ～ 6 | 6 | 4 | 4 | 6 ～ 16 |
| Underneck length (ℓ1)(mm) | 6 ～ 36 | - | 1 ～ 20 | 0.5 ～ 30 | 0.5 ～ 8 | - | - | 35 ～ 108 | 35 ～ 108 | - | 7.5 ～ 24 | - | - | 28 ～ 120 | 24 ～ 105 | 24 ～ 55 | - | 17 ～ 55 | 28 ～ 90 | - | - | 12.5 ～ 20 | - | 2 ～ 48 | 1 ～ 60 | 6 ～ 36 | 0.5 ～ 10 | - | 1 ～ 60 | 6 ～ 35 | - | 2 ～ 48 | 3 ～ 48 | - | 1.5 ～ 6 | 2.5 ～ 12 | - | - | - | - | 0.2 ～ 25 | 2 ～ 8 | - | 1.5 ～ 10 | - |
| Machining Application | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Groove | Plane / Side / Curved surface | Plane / Side / Groove | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | - | - | - | Plane / Groove | Side / Curved surface |
| Coating | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | Non-Coated | For High Hardness (Silicon Group) | TiAlN | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | For High Hardness (Silicon Group) | - | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | TiAlN | Non-Coated | Non-Coated | Other |
| Type | Long-Neck Radius | High-Feed Radius | radius | Long-Neck Radius | Long-Neck Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | Long-Neck Radius | Tapered neck radius | Tapered neck radius | High-Feed Radius | radius | Long-Neck Radius | radius | radius | radius | radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | radius | radius | Tapered neck radius | Long-Neck Radius | radius | Long-Neck Radius | Long-Neck Radius | radius | radius | radius | radius | radius | High-Feed Radius | High-Feed Radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | radius | High-Feed Radius |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | No torsion | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | No torsion | No torsion | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | No torsion | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | - | No torsion | Weak torsion (15 to 25˚) | Powerful Torsion (45°-60°) |
| R Precision(μm) | - | ±0.015 | - | - | 0.005～-0.005 | - | - | - | - | ±0.015 | ±0.02 | ±0.015 | ±0.015 | ±0.015 | ±0.02 | ±0.02 | ±0.005 | ±0.02 | ±0.015 | ±20 | - | - | - | - | - | - | 0.005～-0.005 | 0.01～-0.01 | 0.005～-0.005 | - | - | 0.005 to -0.005 ～ 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0.01～-0.01 | - | ±0.005 | - | - | - | - | - | - | Corner Radius Tolerance ±0.003 ～ Corner Radius Tolerance ±0.005 | -0.005 to 0.005 | - |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
R Size(mm)
- R0
- 0.02
- 0.03
- 0.05
- 0.1
- F0.12
- 0.15
- F0.16
- 0.2
- F0.2
- F0.24
- 0.25
- F0.28
- 0.3
- F0.32
- 0.4
- F0.4
- 0.5
- 0.5R
- 0.6
- 0.7
- 0.75
- 0.8
- 0.813
- 0.9
- 1
- 1R
- R1
- 1.1
- 1.2
- 1.219
- 1.3
- 1.4
- 1.5
- 1.5R
- R1.5
- 1.6
- 1.625
- 1.7
- 1.8
- 1.9
- 2
- 2R
- R2
- 2.031
- 2.1
- 2.2
- 2.3
- 2.4
- 2.438
- 2.465
- 2.5
- 2.5R
- R2.5
- 2.6
- 2.607
- 2.7
- 2.8
- 2.9
- 3
- R3
- 3.2
- 3.5
- 4
- R4
- 5
- R5
- 6
- R6
- 6.5
- 8
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 22
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 41
- 42
- 45
- 48
- 50
- 54
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-12/1mm Unit(s)]
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Manufacturer
-
- NS TOOL (9)
- UNION TOOL (8)
- OSG (6)
- KYOWA SEIKO (4)
- VAN_HOORN (2)
- THE_CUT (1)
- SPEED TIGER (0)
- MAPAL (0)
- ATOM (0)
- NACHI (0)
- DIJET (0)
- GUHRING (0)
- SANKO MFG (0)
- TAIYO-TOOL (0)
- OKAZAKI SEIKO (0)
- 7 LEADERS (0)
- SANDVIK (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy