(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Carbide Radius End Mills（work material：Quenched and tempered steel）
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
UNION TOOL
[Features]
· Higher speed and higher precision machining enabled by shortening the total length and reducing the protruding part of the tool
· The optimized corner radius size enables processing with larger feed than conventional
· Seamless Corner Radius Shape
· High hardness materials up to 65 HRC can also be machinedStandard Price: MYR 288.41- Days to Ship: 6 Day(s) or more -
MHR230R MUGEN-COATING 2-Flute Long Neck Radius End Mill
NS TOOL
The tuned Infinity coating is effective for machining quenched and tempered steel, making it ideal for processing copper electrodes
Standard Price: MYR 174.75- Days to Ship: 5 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: MYR 299.13- Days to Ship: 4 Day(s) or more -
(Economy series) XAL series carbide radius end mill, 2-flute / short model
MISUMI
Radius end mills are available at low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: MYR 87.64- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral / short model
MISUMI
[Features]
·Multi-function end mill radius type.
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45°, regular model
MISUMI
[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
VAC Series Carbide 2-Flute Radius End Mill
MISUMI
[Features]
·Cutting edge radius also reinforced cutting edge rigid
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: MYR 214.81- Days to Ship: 4 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose
OSG
Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
Standard Price: MYR 778.59- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills WX Super Coated High-precision
OSG
High-precision bull nose (radius) end mill for shape processing of molds. High-speed cutting of hardened steel is also possible thanks to the WXS coating with excellent heat resistance.
Standard Price: MYR 224.83- Days to Ship: 5 Day(s) or more -
HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Capable of cutting everything from raw materials to high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: MYR 194.53- Days to Ship: 5 Day(s) or more -
CNRS 4-flute radius for machining titanium and super heat-resistant alloys
UNION TOOL
[Features]
· High Efficiency 4-Flute Radius for Machining Titanium / Super Heat Resistant Alloy
· Life-span increasing UT coating suitable for heat resistant and difficult to cut materials
· Variable split, high torsion and positive rake angle design enables stable machining
· A blade design that reduces the cutting resistance in helical and inclined use, etc.Standard Price: MYR 524.30- Days to Ship: 5 Day(s) or more -
MHRH230R MUGEN-COATING PREMIUM 2-Flute Long Neck Radius End Mill for Hardened Steels
NS TOOL
The Infinity Coating Premium for high hardness materials and new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface
Standard Price: MYR 203.66- Days to Ship: 10 Day(s) -
One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type
DIJET
[Features]
· Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.Standard Price: MYR 619.16- Days to Ship: 14 Day(s) -
Square End Mill Long Neck 4-Flute Corner Radius for High Hardness Steel GF300T 3362
GUHRING
[Features]
· Capable of machining hardened materials of hardness exceeding 60 HRC.
· Suitable for machining in deep locations.Standard Price: MYR 737.85- Days to Ship: 4 Day(s) or more -
Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X
7 LEADERS
[Features]
· Also use the 2-flute short radius end mill to prevent tip chipping.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.Standard Price: MYR 145.78- Days to Ship: 6 Day(s) or more -
MISUMI
Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: MYR 594.78- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: MYR 373.97- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: MYR 374.66- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: MYR 388.69- Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type
MISUMI
A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining
- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Standard Price: MYR 238.59- Days to Ship: 4 Day(s) or more -
XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
MISUMI
3-flute 45° helix radius that's resistant to chattering is available at an affordable price
- Volume Discount
- XAL
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
MISUMI
4-Flute Radius for High-Efficiency and High-Speed Machining
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Days to Ship: 4 Day(s) or more -
(Economy series) XAL series carbide radius end mill, 4-flute / short model
MISUMI
The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Standard Price: MYR 113.88- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Standard Price: MYR 315.37- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
MISUMI
[Features]
·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
Standard Price: MYR 234.06- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Standard Price: MYR 230.50- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
MISUMI
[Features]
·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: MYR 314.36- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
MISUMI
Long neck type with interference prevention can be selected from a number of effective lengths
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: MYR 335.87- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
MISUMI
[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Standard Price: MYR 255.89- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model
MISUMI
[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Standard Price: MYR 278.11- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type
MISUMI
[Features]
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
·Radius type of multi-function end mill
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill
·Long shank type ideal for deep cavity milling
·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Standard Price: MYR 359.82- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral / stub model
MISUMI
[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface while suppressing chattering- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute stub model
MISUMI
[Features]
·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Standard Price: MYR 164.79- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute / short model
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute / regular model
MISUMI
[Features]
·General purpose 2-flute end mill with regular flute length type with cutting edge radius
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type
MISUMI
[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Standard Price: MYR 181.21- Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill 4-Flute / Stub Type
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Standard Price: MYR 300.63 Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute / short model
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute / regular model
MISUMI
[Features]
·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck radius end mill, 2-flute, long neck model
MISUMI
Long neck radius that can be used as a ball and allows a large pick feed
- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
MISUMI
[Features]
·Multi-function long neck radius with high feed capability and excellent durability
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | UNION TOOL | NS TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | UNION TOOL | UNION TOOL | NS TOOL | DIJET | GUHRING | 7 LEADERS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | (Economy series) XAL series carbide radius end mill, 2-flute / short model | TSC series carbide radius end mill, 4-flute, 45° spiral / short model | TSC series carbide radius end mill, 4-flute, 45°, regular model | Micro Grain Carbide End Mills WX Super Coated High-precision | HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius | CNRS 4-flute radius for machining titanium and super heat-resistant alloys | MHRH230R MUGEN-COATING PREMIUM 2-Flute Long Neck Radius End Mill for Hardened Steels | One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type | Square End Mill Long Neck 4-Flute Corner Radius for High Hardness Steel GF300T 3362 | Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X | TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type | XAL series carbide radius end mill, 3-flute, 45° torsion / regular model | XAL series carbide radius end mill, 4-flute, 45° torsion / regular model | (Economy series) XAL series carbide radius end mill, 4-flute / short model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model | TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model | TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model | TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, 3-flute, 45° spiral / stub model | TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type | TSC series carbide radius end mill, 3-flute, 45° spiral / regular model | TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model | TSC series carbide radius end mill, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model | TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type | TSC series carbide long neck radius end mill, 2-flute, long neck model | TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model | ||||||||||||||
| CAD |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 6 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 14 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
| Blade diameter (D)(φ) | 2 ～ 12 | 0.2 ～ 6 | 2 ～ 12 | 1 ～ 12 | 3 ～ 20 | 3 ～ 20 | 1 ～ 12 | 1 ～ 5 | 0.4 ～ 4 | 0.2 ～ 6 | 6 ～ 12 | 0.2 ～ 0.9 | 3 ～ 12 | 6 ～ 16 | 1 ～ 20 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 2 ～ 6 | 0 ～ 16 | 4 ～ 12 | 3 ～ 20 | 2 ～ 12 | 3 ～ 12 | 2 ～ 12 | 2 ～ 20 | 4 ～ 16 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 20 | 3 ～ 22 | 3 ～ 12 | 2 ～ 12 | 1 ～ 12 | 1 ～ 20 | 1 ～ 20 | 2 ～ 12 | 8 | 1 ～ 12 | 1 ～ 12 | 0.2 ～ 6 | 1 ～ 4 |
| R Size(mm) | 0.3 ～ 4 | 0.05 ～ 1 | 0.5 ～ 2 | 0.1 ～ 3 | 0.2 ～ 3 | 0.2 ～ 3 | 0.1 ～ 3 | 0.3 ～ 1 | 0.05 ～ 0.5 | 0.05 ～ 1 | 1 ～ 2 | 0.05 ～ 0.2 | 0.5 ～ 3 | 1 ～ 2 | 0.1 ～ 4 | 0.813 ～ 2.438 | 0.813 ～ 2.607 | 0.813 ～ 2.438 | 0.813 ～ 2.438 | 0.2 ～ 0.5 | 0.2 ～ 2 | 0.2 ～ 2 | 0.1 ～ 3 | 0.5 ～ 2 | 0.75 ～ 3 | 0.5 ～ 2 | 0.5 ～ 3 | 1 ～ 3 | 0.3 ～ 1 | 0.3 ～ 1 | 0.5 ～ 1 | 0.3 ～ 2 | 0.2 ～ 2 | 0.2 ～ 2 | 0.5 ～ 1 | 0.2 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.3 ～ 1 | 0.5 | 0.1 ～ 3 | 0.1 ～ 3 | 0.05 ～ 1 | 0.2 ～ 1 |
| Blade length (ℓ)(mm) | 2 ～ 12 | 0.15 ～ 9 | 4 ～ 24 | 3 ～ 30 | 5 ～ 38 | 5 ～ 56 | 2.5 ～ 30 | 2 ～ 10 | 0.3 ～ 4 | 0.2 ～ 6 | 16 ～ 26 | 0.15 ～ 0.7 | 8 ～ 26 | - | 3 ～ 38 | 8 ～ 24 | 8 ～ 40 | 8 ～ 24 | 8 ～ 24 | 3 ～ 9 | 16 ～ 48 | 18 ～ 38 | 8 ～ 38 | 2 ～ 12 | 1.2 ～ 5 | 2 ～ 12 | 4 ～ 40 | 6 ～ 24 | 4.5 ～ 18 | 4.5 ～ 18 | 4.5 ～ 18 | 5 ～ 26 | 5 ～ 56 | 4.5 ～ 30 | 4.5 ～ 18 | 3 ～ 18 | 1.5 ～ 18 | 2 ～ 40 | 3 ～ 60 | 3 ～ 18 | 12 | 2 ～ 24 | 3 ～ 36 | 0.16 ～ 12 | 0.8 ～ 3.2 |
| Number of flutes(sheet) | 4 | 2 | 3 | 2 | 4 | 4 | 2 | 3 | 2 ～ 4 | 2 | 4 | 2 | 4 | 4 | 2 | 3 | 4 | 3 | 4 | 4 | 3 | 4 | 4 | 3 | 4 | 4 | 4 | 4 | 3 | 4 | 3 | 3 | 3 | 4 | 4 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 2 | 3 |
| Overall Length (L)(mm) | 70 ～ 120 | 45 ～ 110 | 50 ～ 100 | 50 ～ 75 | 60 ～ 110 | 60 ～ 130 | 50 ～ 130 | 60 ～ 70 | 50 ～ 70 | 50 ～ 100 | 90 ～ 120 | 45 ～ 50 | 60 ～ 100 | 75 ～ 150 | 50 ～ 100 | 50 ～ 100 | 50 ～ 150 | 80 ～ 160 | 80 ～ 160 | 50 | 60 ～ 110 | 60 ～ 100 | 50 ～ 100 | 50 ～ 100 | 60 ～ 110 | 50 ～ 100 | 50 ～ 130 | 70 ～ 180 | 40 ～ 65 | 40 ～ 65 | 60 ～ 100 | 60 ～ 100 | 60 ～ 130 | 80 ～ 200 | 60 ～ 100 | 35 ～ 60 | 40 ～ 75 | 40 ～ 110 | 45 ～ 125 | 35 ～ 60 | 55 | 40 ～ 75 | 45 ～ 85 | 40 ～ 100 | 45 ～ 70 |
| work material | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○/◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[○] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] | Quenched and tempered steel[◎] |
| Shank diameter (d)(mm) | 3 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 6 | 4 ～ 6 | 4 ～ 6 | 6 ～ 12 | 4 | 6 ～ 12 | 6 ～ 16 | 4 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 | 6 ～ 16 | 6 ～ 12 | 4 ～ 20 | 4 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 16 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 4 ～ 12 | 8 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 |
| Underneck length (ℓ1)(mm) | 6 ～ 36 | 0.5 ～ 48 | - | - | 18 ～ 73 | 26 ～ 92 | - | 4 ～ 15 | 1 ～ 20 | 0.5 ～ 30 | - | 0.5 ～ 8 | 10 ～ 15 | 39 ～ 105 | - | - | - | 35 ～ 108 | 35 ～ 108 | - | - | - | - | - | 7.5 ～ 24 | - | - | 28 ～ 120 | - | - | 14 ～ 68 | 18 ～ 70 | 26 ～ 92 | 10 ～ 18 | 14 ～ 68 | - | 14 ～ 45 | 17 ～ 45 | 23 ～ 55 | - | - | 17 ～ 45 | 23 ～ 55 | 1 ～ 40 | 6 ～ 30 |
| Machining Application | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Side / Curved surface | - | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts |
| Coating | For High Hardness (Silicon Group) | TiAlN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) / TiCN | For High Hardness (Silicon Group) | - | Other | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Type | Long-Neck Radius | Long-Neck Radius | High-Feed Radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | radius | Long-Neck Radius | radius | Long-Neck Radius | radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | radius | radius | radius | radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | Long-Neck Radius |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | - | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | 45° | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | No torsion | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) |
| R Precision(μm) | - | 0.005～-0.005 ～ 0.01～-0.01 | ±0.015 | ±0.02 | ±0.01 | ±0.01 | - | - | - | - | - | 0.005～-0.005 | 0.02～-0.02 | - | 0～-20 | - | - | - | - | ±0.005 | ±0.02 | ±0.02 ～ 10 | ±0.02 | ±0.015 | ±0.02 | ±0.015 | ±0.015 | ±0.015 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.02 | ±0.01 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.005 ～ ±0.01 | ±0.005 ～ ±0.01 |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
R Size(mm)
- R0
- 0.02
- 0.03
- 0.05
- 0.1
- F0.12
- 0.15
- F0.16
- 0.2
- F0.2
- F0.24
- 0.25
- F0.28
- 0.3
- F0.32
- 0.4
- F0.4
- 0.5
- 0.5R
- 0.6
- 0.7
- 0.75
- 0.8
- 0.813
- 0.9
- 1
- 1R
- R1
- 1.1
- 1.2
- 1.219
- 1.3
- 1.4
- 1.5
- 1.5R
- R1.5
- 1.6
- 1.625
- 1.7
- 1.8
- 1.9
- 2
- 2R
- R2
- 2.031
- 2.1
- 2.2
- 2.3
- 2.4
- 2.438
- 2.465
- 2.5
- 2.5R
- R2.5
- 2.6
- 2.607
- 2.7
- 2.8
- 2.9
- 3
- R3
- 3.2
- 3.5
- 4
- R4
- 5
- R5
- 6
- R6
- 6.5
- 8
[0.1-3/0.1mm Unit(s)]
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 22
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 41
- 42
- 45
- 48
- 50
- 54
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy