(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Carbide Radius End Mills（work material：general steel Page3）
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels
NS TOOL
Superior surface finish with excellent chipping prevention and reduced chattering due to the use of MUGEN coating for hardened steels and a new shape
Standard Price: MYR 233.95- Days to Ship: 4 Day(s) or more -
MHR430R MUGEN-COATING 4-Flute Long Neck Radius End Mill
NS TOOL
Design dedicated for short blade length. Suppresses chatter by further reducing workpiece contact
Standard Price: MYR 271.66- Days to Ship: 10 Day(s) -
MHDH645R 6-Flute Radius-End Mill for High-Hardness
NS TOOL
Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC)
Standard Price: MYR 570.85- Days to Ship: 5 Day(s) or more -
OSG
The three-dimensional negative shape of the R section provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.
Standard Price: MYR 799.69- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX Long Tough Radius
OSG
4-flute radius end mill long neck type suitable for rib machining.
Standard Price: MYR 249.81- Days to Ship: 5 Day(s) or more -
CBN End Mills 2Flutes Long Neck Radius
OSG
The CBN construction enables high-efficiency and high-precision machining, and fewer tool changes make continuous machining possible, leading to cost reductions.
Standard Price: MYR 900.98- Days to Ship: 5 Day(s) or more -
HGGVRX HG Coated Carbide High Helix Radius
SANKO MFG
[Features]
· HGGCNX radius type.
· Suitable for corner rounding or cutting curved surfaces.
· High efficiency machining can be achieved due to a larger contact area than with a ball end mill, which increases the pick feed.Standard Price: MYR 301.21- Days to Ship: 7 Day(s) or more -
SAGVR2T SA Coated Carbide Radius 2-Flute
SANKO MFG
[Features]
· Ideal for corner rounding or cutting curved surfaces.
· Can also be used to prevent chipped corners.Standard Price: MYR 353.87- Days to Ship: 7 Day(s) or more -
SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank
SANKO MFG
[Features]
· Suitable for corner rounding or cutting curved surfaces.
· A long shank type which allows for machining in deep sections.
· Finished surfaces can be improved and high-efficiency machining is possible.Standard Price: MYR 712.41- Days to Ship: 7 Day(s) or more -
SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank
SANKO MFG
Suitable for corner rounding or cutting curved surfaces. The long shank allows for machining in deep sections.
[Features]
· A long shank type which allows for machining in deep sections.Standard Price: MYR 623.29- Days to Ship: 7 Day(s) or more -
ATOM
Simultaneously machines rounded corners and straight base surfaces. High precision radius shape smoothly connects the straight part with the rounded part.
Standard Price: MYR 310.35- Days to Ship: 4 Day(s) or more -
SCD2 End Mill with Corner R, 2-Flute, Non-Coated
OKAZAKI SEIKO
The adoption of a long shank allows for corner rounding in deep sections.
Standard Price: MYR 322.46- Days to Ship: 9 Day(s) or more -
SCD2A End Mill with Corner R, 2-Flute, OK Coated
OKAZAKI SEIKO
The adoption of a long shank allows for corner rounding in deep sections.
Standard Price: MYR 418.93- Days to Ship: 9 Day(s) or more -
SCE4A Ultra-Strong Radius, 4-Flute, OK Coated
OKAZAKI SEIKO
A multi-function type end mill that is capable of groove milling and side milling as well as profiling.
Standard Price: MYR 418.93- Days to Ship: 14 Day(s) -
Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 532.68- Days to Ship: 7 Day(s) or more -
Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 467.50- Days to Ship: 5 Day(s) or more -
CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut
SANDVIK
Unique shape exhibits high performance
Standard Price: MYR 573.16- Days to Ship: 10 Day(s) -
End Mill with 2 Carbide Flutes and Corner Radius KSER-2
KYOWA SEIKO
[Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 346.25- Days to Ship: 6 Day(s) or more -
End Mill with 2 Carbide Flutes and Corner Radius KSR-2
KYOWA SEIKO
[Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 311.82- Days to Ship: 6 Day(s) or more -
End Mill with 2 Carbide Flutes and Corner Radius KSRA-2
KYOWA SEIKO
[Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 406.51- Days to Ship: 6 Day(s) or more -
Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC
KYOWA SEIKO
[Specifications]
· Shape: Radius End Mill (carbide)
· Material: Super Micro Grain Alloy
· Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / cast iron [◎]
[Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined CuttingStandard Price: MYR 647.56- Days to Ship: 6 Day(s) or more -
End Mill with 4 Carbide Flutes and Corner Radius KSRA-4
KYOWA SEIKO
[Features]
A carbide end mill suitable for general steel, stainless steel, and other workpieces, 2 flutes, with corner R.
It is resistant to breakage and chipping.
The high cutting speed and high production efficiency lead to overall production cost reduction.
[Applications]
Suitable for slab milling, side milling, curved surface milling, grooving, and ramping.Standard Price: MYR 527.04- Days to Ship: 6 Day(s) or more -
TiAlN Coat, Carbide long neck radius end mill, 2 flutes
VAN_HOORN
[Features]
· Micro end mill ideal for machining deep ribs in materials up to HRC 55, available from 0.1 mm blade diameter up.
· A long product life is achieved with new generation TiAlN coating and a newly designed blade tip shape.
· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)Standard Price: MYR 202.61- Days to Ship: 4 Day(s) or more -
TiAlN Coat, Carbide long neck radius end mill, 4 flutes
VAN_HOORN
[Features]
· Micro end mill ideal for machining deep ribs in materials up to HRC 55.
· 4-flute blade with a small blade diameter of 0.2 mm up is achieved. Compared to 2-flute type, this model has higher rigidity, longer tool service life, and achieves more efficient machining.
· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)Standard Price: MYR 219.23- Days to Ship: 4 Day(s) or more -
SPEED/T 4 Flute Anti-Vibration Radius
SPEED TIGER
[Features]
· Supports high speed processing and large cutting depth with vibration prevention effects due to core thickness change.
· Total length of 100 mm and inexpensive so that it's easy to use.Standard Price: MYR 215.41 Days to Ship: 6 Day(s) or more -
Carbide 2-Flute Corner Radius Medium End Mill 30° B257X
7 LEADERS
[Features]
· Also use the 2-flute medium shank radius end mill to prevent tip chipping.
· Enables radius cutting deep into the work materials.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.Standard Price: MYR 145.78- Days to Ship: 6 Day(s) or more -
Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X
7 LEADERS
[Features]
· Also use the 4-flute short radius end mill to prevent tip chipping.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.
· It supports high-speed side cutting.Standard Price: MYR 145.78- Days to Ship: 4 Day(s) or more -
Carbide 4-Flute Variable Split Corner Radius Medium End Mill 30° B258X
7 LEADERS
[Features]
· Also use the 4-flute medium shank radius end mill to prevent tip chipping.
· Enables radius cutting deep into the work materials.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.
· It supports high-speed side cutting.Standard Price: MYR 145.78- Days to Ship: 6 Day(s) or more -
CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730
SANDVIK
[Features]
· Twice the cutting depth that was conventionally possible
· Ideal for everything from shoulder cutting to full grooving.
· With reinforced edge lines, assures long product life even with intense machining.Standard Price: MYR 627.29- Days to Ship: 10 Day(s) -
All Purpose Unequal Lead End Mill Regular Corner Radius 4-Flute RF100U 3872
GUHRING
[Features]
· A versatile unequal lead type which supports a wide range of materials from raw materials to hardened materials.Standard Price: MYR 407.25- Days to Ship: 4 Day(s) or more -
GSX MILL VL Long Shank Radius 1.5D GSXVLLS4-R-1.5D
NACHI
[Features]
· Minimizes chattering during machining on vertical walls or deep engraving, allowing highly efficient high-quality machining to be performed.
· For steel.Standard Price: MYR 516.14- Days to Ship: 4 Day(s) or more -
SHR320 CBN High Efficiency Radius End Mill
NS TOOL
[Features]
· 3 flutes and spiral-shaped corner R provide high accuracy and high efficiency machining.Standard Price: MYR 905.57- Days to Ship: 11 Day(s) -
Carbide 4 Flute End Mill IC4MRS
THE_CUT
[Features]
· Outstanding cost performance.
· Capable of machining a wide range of workpieces from raw materials up to alloy steel.
· S3 coated for longer life.Standard Price: MYR 205.85- Days to Ship: 7 Day(s) or more -
Solid Carbide Square End Mill For High Hardness (5 Flutes) IC5HSVR
THE_CUT
[Features]
· Employs a special coating with excellent wear and heat resistance, good smoothness and non-welding properties.
· Can be used for a wide range of machining from raw materials through to difficult-to-cut materials.
· The innovative blade shape, the use of the hardest form of carbide and the special coating all combine to allow for high speeds and high feed rates.Standard Price: MYR 695.06- Days to Ship: 7 Day(s) or more -
UNION TOOL
[Features]
· A long neck radius end mill; ideal for machining high hardness materials.
· 6-flute type; designed with an emphasis on rigidity.Standard Price: MYR 494.23- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NS TOOL | NS TOOL | NS TOOL | OSG | OSG | OSG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | ATOM | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | DIJET | DIJET | SANDVIK | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | VAN_HOORN | VAN_HOORN | SPEED TIGER | 7 LEADERS | 7 LEADERS | 7 LEADERS | SANDVIK | GUHRING | NACHI | NS TOOL | THE_CUT | THE_CUT | UNION TOOL |
| Product Series | MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels | Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners) | Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners) | Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC | Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X | Carbide 4-Flute Variable Split Corner Radius Medium End Mill 30° B258X | CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730 | All Purpose Unequal Lead End Mill Regular Corner Radius 4-Flute RF100U 3872 | Solid Carbide Square End Mill For High Hardness (5 Flutes) IC5HSVR | ||||||||||||||||||||||||||
| CAD |
|
|
| ||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 14 Day(s) | 7 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more |
| Blade diameter (D)(φ) | 1 ～ 6 | 1 ～ 6 | 5 ～ 12 | 0.5 ～ 3 | 0.8 ～ 3 | 0.5 ～ 3 | 4 ～ 25 | 3 ～ 20 | 6 ～ 25 | 6 ～ 25 | 1 ～ 6 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 10 | 3 ～ 20 | 2 ～ 16 | 1 ～ 4 | 1 ～ 6 | 0.5 ～ 3 | 8 ～ 16 | 1 ～ 3 | 0.1 ～ 2.5 | 0.4 ～ 2 | 6 | 3 ～ 20 | 1 ～ 20 | 3 ～ 20 | - | 6 ～ 25 | 4 ～ 5 | 0.5 ～ 2 | 6 ～ 12 | 6 ～ 16 | - |
| R Size(mm) | 0.05 ～ 1 | 0.05 ～ 1 | 0.2 ～ 2 | 0.05 ～ 0.5 | 0.1 ～ 0.5 | 0.05 ～ 0.5 | 0.5 ～ 3 | 0.5 ～ 5 | 0.3 ～ 8 | 0.3 ～ 8 | 0.1 ～ 2 | 0.2 ～ 2 | 0.2 ～ 2 | 0.5 ～ 2 | 0.5 | 0.2 ～ 1 | 0.2 ～ 2 | - | - | - | - | - | 0.03 ～ 0.2 | 0.05 ～ 0.2 | 2 | 0.1 ～ 4 | 0.1 ～ 4 | 0.1 ～ 4 | 0.5 ～ 2 | 0.5 ～ 3 | 0.2 | 0.1 ～ 0.3 | 0.3 ～ 1 | 0.5 ～ 2 | - |
| Blade length (ℓ)(mm) | 0.8 ～ 5 | 0.8 ～ 5 | 10 ～ 24 | 0.3 ～ 1.8 | 0.32 ～ 1.2 | 0.3 ～ 1.8 | 9 ～ 56 | 10 ～ 45 | 20 ～ 75 | 20 ～ 75 | 3 ～ 15 | 12 ～ 36 | 12 ～ 36 | 8 ～ 24 | 21 ～ 34 | 8 ～ 38 | 2 ～ 16 | 1 ～ 40 | 3 ～ 13 | 1.5 ～ 10 | 12 ～ 24 | 3 ～ 10 | 0.2 ～ 3 | 0.6 ～ 3 | 15 | 10 ～ 55 | 3 ～ 38 | 10 ～ 55 | - | 13 ～ 45 | 6 ～ 7.5 | 0.25 ～ 1 | 13 ～ 26 | 17 ～ 45 | 6 ～ 12 |
| Number of flutes(sheet) | 4 | 4 | 6 | 2 | 4 | 2 | 4 | 2 | 4 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 2 ～ 4 | 2 | 2 | 2 | 3 | 4 | 2 | 4 | 4 | 2 | 4 | 4 | 4 | 4 | 4 | - | 4 | 5 | 6 |
| Overall Length (L)(mm) | 50 ～ 110 | 50 ～ 110 | 60 ～ 80 | 45 ～ 50 | 50 | 45 ～ 50 | 50 ～ 140 | 50 ～ 115 | 120 ～ 230 | 120 ～ 230 | 45 ～ 60 | 70 ～ 110 | 70 ～ 110 | 70 ～ 110 | 60 ～ 90 | 60 ～ 125 | 57 ～ 92 | 50 ～ 80 | 40 ～ 50 | 60 | 100 ～ 160 | 60 | 64 | 64 | 100 | 50 ～ 160 | 50 ～ 100 | 50 ～ 160 | 57 ～ 72 | 57 ～ 121 | 60 | 50 ～ 52 | 50 ～ 75 | 60 ～ 110 | 60 ～ 100 |
| work material | general steel[◎] | general steel[◎] | general steel[◎] | general steel[○] | general steel[○] | general steel[○] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[○] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[○] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[○] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[○] | general steel[◎] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] |
| Shank diameter (d)(mm) | 4 ～ 6 | 4 ～ 6 | 6 ～ 12 | 4 ～ 6 | 4 | 4 ～ 6 | 4 ～ 25 | 6 ～ 20 | 6 ～ 25 | 6 ～ 25 | 4 ～ 6 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 10 | 6 ～ 20 | 6 ～ 16 | 4 ～ 6 | 4 ～ 6 | 3 | 6 ～ 14 | 3 | 4 ～ 6 | 6 | 6 | 3 ～ 20 | 4 ～ 20 | 3 ～ 20 | 6 ～ 12 | 6 ～ 25 | 6 | 4 | 6 ～ 12 | 6 ～ 16 | 6 ～ 12 |
| Underneck length (ℓ1)(mm) | 2 ～ 48 | 3 ～ 48 | - | 1.5 ～ 6 | 2 ～ 16.65 | 2.5 ～ 12 | - | - | - | - | - | - | - | 15 ～ 42 | - | - | 18 ～ 42 | - | - | - | - | - | 0.2 ～ 25 | 2 ～ 8 | - | - | - | - | - | 21 ～ 65 | 20 ～ 25 | 1.5 ～ 10 | - | - | - |
| Machining Application | Plane / Side / Groove | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface | Plane / Groove | Plane / Groove | Plane / Side / Groove | Side | Side / Groove | Groove | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | - | - | Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | - | - | - | Plane / Groove | Side / Curved surface / Groove | Side / Curved surface | - |
| Coating | For High Hardness (Silicon Group) | TiAlN | For High Hardness (Silicon Group) | - | For High Hardness (Silicon Group) | - | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN | AlTiN | Non-Coated | Non-Coated | TiAlN | DLC | TiAlN | TiAlN | TiAlN | AlTiN | - | - | - | - | Other | For General Steels (AlCrN, etc.) | Non-Coated | For General Steels (AlCrN, etc.) | Other | For High Hardness (Silicon Group) |
| Type | Long-Neck Radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | - | radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | radius | High-Feed Radius | Long-Neck Radius |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | - | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Other | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) |
| R Precision(μm) | 0.005 to -0.005 ～ 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0.01～-0.01 | - | 0～-0.01 | ±0.005 | 0～+0.04 | 0～+0.04 | 0～+0.04 | 0～+0.04 | ±0.02 ～ ±0.05 | - | - | - | - | - | - | - | - | - | - | - | - | - | ±0.01 | 0～-20 | 0～-20 | 0～-20 | - | - | - | -0.005 to 0.005 | - | - | ±10 ～ ±15 |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
R Size(mm)
- R0
- 0.02
- 0.03
- 0.05
- 0.1
- F0.12
- 0.15
- F0.16
- 0.2
- F0.2
- F0.24
- 0.25
- F0.28
- 0.3
- F0.32
- 0.4
- F0.4
- 0.5
- 0.5R
- 0.6
- 0.7
- 0.75
- 0.8
- 0.813
- 0.9
- 1
- 1R
- R1
- 1.1
- 1.2
- 1.219
- 1.3
- 1.4
- 1.5
- 1.5R
- R1.5
- 1.6
- 1.625
- 1.7
- 1.8
- 1.9
- 2
- 2R
- R2
- 2.031
- 2.1
- 2.2
- 2.3
- 2.4
- 2.438
- 2.465
- 2.5
- 2.5R
- R2.5
- 2.6
- 2.607
- 2.7
- 2.8
- 2.9
- 3
- R3
- 3.2
- 3.5
- 4
- R4
- 5
- R5
- 6
- R6
- 6.5
- 8
[0.1-3/0.1mm Unit(s)]
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 22
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 41
- 42
- 45
- 48
- 50
- 54
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy