(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Carbide Radius End Mills（Machining Application：Groove Page2）
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)
OSG
End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.
Standard Price: MYR 387.22- Days to Ship: 5 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Standard Price: MYR 508.07- Days to Ship: 5 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Standard Price: MYR 3,975.76- Days to Ship: 5 Day(s) or more -
Carbide End Mills DLC Coated 2 Flutes Short for Aluminum Alloys
OSG
End mill for aluminum alloy based on the concept of ultra-high speed machining. Ideal for high-efficiency processing of large aluminum parts for aircrafts, etc.
Standard Price: MYR 913.63- Days to Ship: 5 Day(s) or more -
3 Flutes Short for Copper & Aluminum Alloys
OSG
Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.
Standard Price: MYR 389.91- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
Standard Price: MYR 698.41- Days to Ship: 5 Day(s) or more -
Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys
OSG
High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.
Standard Price: MYR 871.43 Days to Ship: 5 Day(s) or more -
Diamond Coated 2Flutes Long Shank
OSG
Thin vertical wall milling tool for graphite electrode. The step processing prevents chattering and chipping. A rounded blade is used for the shank side as well.
Standard Price: MYR 1,263.90- Days to Ship: 5 Day(s) or more -
Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation
OSG
Ultra-smooth DLC coating enables semi-dry processing as well as high speed processing of aluminum.
Standard Price: MYR 453.64- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills DG Coated 2/4 Flutes Long Neck/Pencil Neck Corner Radius
OSG
Carbide end mill radius type suitable for diamond coating dedicated to graphite.
Standard Price: MYR 711.07- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX Pencil Neck Deep-Feed Radius
OSG
Pencil neck radius end mill that achieves high-efficiency machining of deep parts that are prone to chattering and difficult-to-cut materials.
Standard Price: MYR 567.58- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX Long Neck Deep-Feed Radius
OSG
It achieves high-efficiency machining of deep parts that are prone to chattering and difficult-to-cut materials. Long neck type radius end mill.
Standard Price: MYR 542.26- Days to Ship: 5 Day(s) or more -
HLRS2000 HM Coated 2-Flute Long Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Capable of cutting everything from raw materials to high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: MYR 176.85- Days to Ship: 5 Day(s) or more -
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_b$)
C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]
UNION TOOL
[Features]
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Available with an extensive lineup of corner radiiStandard Price: MYR 241.04- Days to Ship: 6 Day(s) or more -
SSR200 CBN Super Speed Radius End Mill
NS TOOL
Achieves high-efficiency machining of corner radius due to outstanding CBN durability
Standard Price: MYR 746.41- Days to Ship: 10 Day(s) or more -
NS TOOL
Straight and corner rounding processing can be performed at the same time. Outstanding corner radius precision
Standard Price: MYR 328.11- Days to Ship: 5 Day(s) or more -
MSRS230 MUGEN-COATING 2-Flute Radius End Mill
NS TOOL
Straight and corner rounding processing can be performed at the same time.
Standard Price: MYR 264.10- Days to Ship: 5 Day(s) or more -
MSTNR230 MUGEN-COATING Long Tapered Neck Radius End Mill
NS TOOL
Suppresses chattering for stable high-speed cutting and improved finish surfaces for everything from semi-rough to high-precision finish machining
Standard Price: MYR 295.71- Days to Ship: 5 Day(s) or more -
CPRS25NSP Two-Flute Long-Neck Radius for Processing Aluminum/Resin, 25° Torsion
UNION TOOL
[Features]
· For Machining Aluminum/Resin
· Non-coated, R0.1 corner radius, long-neck radius
· Subtle corner rounding suppresses lasting bottom cutter marksStandard Price: MYR 250.54- Days to Ship: 9 Day(s) or more -
CPRS30N Two-Flute Long-Neck Radius for Processing Aluminum/Resin, 30° Torsion
UNION TOOL
[Features]
· For Machining Aluminum/Resin
· Non-Coated Long-Neck Radius
· Surface roughness was emphasized in the design of this toolStandard Price: MYR 302.20- Days to Ship: 9 Day(s) -
CRS40HSP High Efficiency 3-Flute Long Neck Radius 40° Twist
UNION TOOL
[Features]
· High Efficiency 3-Flute Long Neck Radius (Short Blade)
· 40° Torsion
· Supports materials from SUS to pre-hardened and hardened steel (60 HRC)Standard Price: MYR 394.51- Days to Ship: 9 Day(s) -
CRS20HSP High Efficiency 4-Flute Long Neck Radius 20° Twist
UNION TOOL
[Features]
· High-rigidity 4-flute radius 8 (for high-hardness materials). 20° torsion.Standard Price: MYR 267.92- Days to Ship: 9 Day(s) or more -
MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels
NS TOOL
Superior surface finish with excellent chipping prevention and reduced chattering due to the use of MUGEN coating for hardened steels and a new shape
Standard Price: MYR 233.95- Days to Ship: 4 Day(s) or more -
OSG
The three-dimensional negative shape of the R section provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.
Standard Price: MYR 799.69- Days to Ship: 5 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX Long Tough Radius
OSG
4-flute radius end mill long neck type suitable for rib machining.
Standard Price: MYR 249.81- Days to Ship: 5 Day(s) or more -
CBN End Mills 2Flutes Long Neck Radius
OSG
The CBN construction enables high-efficiency and high-precision machining, and fewer tool changes make continuous machining possible, leading to cost reductions.
Standard Price: MYR 900.98- Days to Ship: 5 Day(s) or more -
HGGVRX HG Coated Carbide High Helix Radius
SANKO MFG
[Features]
· HGGCNX radius type.
· Suitable for corner rounding or cutting curved surfaces.
· High efficiency machining can be achieved due to a larger contact area than with a ball end mill, which increases the pick feed.Standard Price: MYR 301.21- Days to Ship: 7 Day(s) or more -
SAGVR2T SA Coated Carbide Radius 2-Flute
SANKO MFG
[Features]
· Ideal for corner rounding or cutting curved surfaces.
· Can also be used to prevent chipped corners.Standard Price: MYR 353.87- Days to Ship: 7 Day(s) or more -
SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank
SANKO MFG
[Features]
· Suitable for corner rounding or cutting curved surfaces.
· A long shank type which allows for machining in deep sections.
· Finished surfaces can be improved and high-efficiency machining is possible.Standard Price: MYR 712.41- Days to Ship: 7 Day(s) or more -
SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank
SANKO MFG
Suitable for corner rounding or cutting curved surfaces. The long shank allows for machining in deep sections.
[Features]
· A long shank type which allows for machining in deep sections.Standard Price: MYR 623.29- Days to Ship: 7 Day(s) or more -
SCD2 End Mill with Corner R, 2-Flute, Non-Coated
OKAZAKI SEIKO
The adoption of a long shank allows for corner rounding in deep sections.
Standard Price: MYR 322.46- Days to Ship: 9 Day(s) or more -
SCD2A End Mill with Corner R, 2-Flute, OK Coated
OKAZAKI SEIKO
The adoption of a long shank allows for corner rounding in deep sections.
Standard Price: MYR 418.93- Days to Ship: 9 Day(s) or more -
SCE4A Ultra-Strong Radius, 4-Flute, OK Coated
OKAZAKI SEIKO
A multi-function type end mill that is capable of groove milling and side milling as well as profiling.
Standard Price: MYR 418.93- Days to Ship: 14 Day(s) -
Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 407.35- Days to Ship: 7 Day(s) or more -
Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 329.07- Days to Ship: 5 Day(s) or more -
Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 706.86- Days to Ship: 7 Day(s) or more -
Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: MYR 467.50- Days to Ship: 5 Day(s) or more -
CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut
SANDVIK
Unique shape exhibits high performance
Standard Price: MYR 573.16- Days to Ship: 10 Day(s) -
CBN 2-Flute Corner Radius End Mill SBRE-2
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
It is possible to increase the depth of cut.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: MYR 1,017.75- Days to Ship: 6 Day(s) or more -
CBN 2-Flute Corner Radius End Mill SBREF-2
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
It is possible to increase the depth of cut.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: MYR 974.70- Days to Ship: 6 Day(s) or more -
CBN 3-Flute Corner Radius End Mill SBRE-3
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
High-efficiency machining is possible with high feed.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: MYR 1,753.83- Days to Ship: 6 Day(s) or more -
CBN 3-Flute Corner Radius End Mill SBREF-3
KYOWA SEIKO
Direct carving of high hardness material and hardened steel.
High-efficiency machining is possible with high feed.
Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cutStandard Price: MYR 1,146.89- Days to Ship: 6 Day(s) or more -
PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2
KYOWA SEIKO
[Specifications]
· Shape: Radius End Mill (carbide)
· Material: PCD Polycrystalline Diamond
· Work materials: For carbide alloy machining
[Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined CuttingStandard Price: MYR 4,078.28- Days to Ship: 7 Day(s) or more -
End Mill with 2 Carbide Flutes and Corner Radius KSER-2
KYOWA SEIKO
[Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 346.25- Days to Ship: 6 Day(s) or more -
End Mill with 2 Carbide Flutes and Corner Radius KSR-2
KYOWA SEIKO
[Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: MYR 311.82- Days to Ship: 6 Day(s) or more
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | OSG | OSG | OSG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | DIJET | DIJET | DIJET | DIJET | SANDVIK | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO |
| Product Series | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank) | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius | Carbide End Mills DLC Coated 2 Flutes Short for Aluminum Alloys | Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys | Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation | Micro Grain Carbide End Mills DG Coated 2/4 Flutes Long Neck/Pencil Neck Corner Radius | Micro Grain Carbide End Mills PHOENIX Pencil Neck Deep-Feed Radius | Micro Grain Carbide End Mills PHOENIX Long Neck Deep-Feed Radius | C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product] | CPRS25NSP Two-Flute Long-Neck Radius for Processing Aluminum/Resin, 25° Torsion | CPRS30N Two-Flute Long-Neck Radius for Processing Aluminum/Resin, 30° Torsion | MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels | Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type | Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type | Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners) | PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2 | ||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 14 Day(s) | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 10 Day(s) | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Blade diameter (D)(φ) | 0.5 ～ 2.5 | 2 ～ 4 | 16 ～ 20 | 12 ～ 25 | 6 ～ 12 | 6 ～ 20 | 12 | 5 ～ 11 | 3 ～ 20 | 0.5 ～ 3 | 2 ～ 12 | 4 ～ 16 | 0.4 ～ 6 | 1.5 ～ 6 | 0.2 ～ 2 | 1 ～ 6 | 1 ～ 5 | 0.2 ～ 3 | 2 ～ 12 | 4 ～ 10 | 2 ～ 12 | 2 ～ 12 | 1 ～ 6 | 0.5 ～ 3 | 0.8 ～ 3 | 0.5 ～ 3 | 4 ～ 25 | 3 ～ 20 | 6 ～ 25 | 6 ～ 25 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 20 | 6 ～ 20 | 8 ～ 20 | 3 ～ 20 | 2 ～ 16 | 0.3 ～ 6 | 0.3 ～ 3 | 3 ～ 6 | 0.3 ～ 2 | 0.5 ～ 2 | 1 ～ 4 | 1 ～ 6 |
| R Size(mm) | 0.1 | 0.5 ～ 1 | 2 | 1 ～ 3 | 0.5 ～ 2 | 1.5 ～ 3 | 1 | 0.3 ～ 1 | 0.5 ～ 3 | 0.1 ～ 0.2 | 0.5 ～ 2 | 1 ～ 3 | 0.05 ～ 1 | 0.2 ～ 2 | 0.02 ～ 0.5 | 0.2 ～ 2 | 0.1 ～ 1.5 | 0.05 ～ 0.5 | 0.1 | 0.2 ～ 0.8 | 0.1 ～ 0.5 | 0.2 ～ 1.2 | 0.05 ～ 1 | 0.05 ～ 0.5 | 0.1 ～ 0.5 | 0.05 ～ 0.5 | 0.5 ～ 3 | 0.5 ～ 5 | 0.3 ～ 8 | 0.3 ～ 8 | 0.2 ～ 2 | 0.2 ～ 2 | 0.5 ～ 2 | 0.4 ～ 5 | 0.4 ～ 5 | 0.5 ～ 4 | 0.2 ～ 1 | 0.2 ～ 2 | - | - | - | - | - | - | - |
| Blade length (ℓ)(mm) | 0.7 ～ 3.7 | 6 ～ 11 | 48 ～ 56 | 14 ～ 27 | 13 ～ 26 | 12 ～ 40 | 18 | 10 ～ 22 | 4.5 ～ 30 | 0.9 ～ 4.5 | 3 ～ 18 | 6 ～ 24 | 0.4 ～ 6 | 3 ～ 15 | 0.08 ～ 1.2 | 3 ～ 18 | 2 ～ 10 | 0.15 ～ 2.5 | 3 ～ 16 | 5 ～ 12 | 3 ～ 15 | 2.5 ～ 15 | 0.8 ～ 5 | 0.3 ～ 1.8 | 0.32 ～ 1.2 | 0.3 ～ 1.8 | 9 ～ 56 | 10 ～ 45 | 20 ～ 75 | 20 ～ 75 | 12 ～ 36 | 12 ～ 36 | 8 ～ 24 | 9 ～ 30 | 17 ～ 45 | 12 ～ 33 | 8 ～ 38 | 2 ～ 16 | 0.3 ～ 2 | 0.3 ～ 2 | 1.5 ～ 2 | 0.5 ～ 1.5 | 0.5 ～ 1.5 | 1 ～ 40 | 3 ～ 13 |
| Number of flutes(sheet) | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 2 | 3 | 2 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 4 | 4 | 2 | 4 | 2 | 4 | 2 | 4 | 2 | 2 | 2 | 4 | 3 | 2 | 3 | 4 | 2 ～ 4 | 2 | 2 | 3 | 3 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 50 | 40 ～ 70 | 140 ～ 160 | 90 ～ 110 | 50 ～ 75 | 80 ～ 150 | 90 | 100 ～ 180 | 50 ～ 125 | 50 ～ 100 | 60 ～ 220 | 70 ～ 175 | 50 ～ 120 | 45 ～ 50 | 48 ～ 53 | 45 ～ 60 | 60 ～ 70 | 50 ～ 110 | 38 ～ 90 | 50 ～ 80 | 38 ～ 120 | 50 ～ 75 | 50 ～ 110 | 45 ～ 50 | 50 | 45 ～ 50 | 50 ～ 140 | 50 ～ 115 | 120 ～ 230 | 120 ～ 230 | 70 ～ 110 | 70 ～ 110 | 70 ～ 110 | 80 ～ 200 | 55 ～ 115 | 70 ～ 120 | 60 ～ 125 | 57 ～ 92 | 50 ～ 60 | 50 ～ 60 | 50 ～ 70 | 50 | 50 | 50 ～ 80 | 40 ～ 50 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] | Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Graphite[◎] | Aluminum[◎] / Copper[○] / Resin[◎] | Graphite[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | High Hardness Steel-HRC65[○] / Aluminum[◎] / Resin[◎] | Aluminum[◎] / Copper[○] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Graphite[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | Aluminum[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC60[○] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] |
| Shank diameter (d)(mm) | 6 | 4 ～ 6 | 16 ～ 20 | 12 ～ 25 | 6 ～ 12 | 6 ～ 20 | 12 | 4 ～ 10 | 6 ～ 20 | 4 | 6 ～ 20 | 4 ～ 16 | 4 ～ 6 | 4 ～ 6 | 4 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 3 ～ 12 | 6 ～ 10 | 3 ～ 12 | 6 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 | 4 ～ 6 | 4 ～ 25 | 6 ～ 20 | 6 ～ 25 | 6 ～ 25 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 5.8 ～ 18 | 6 ～ 20 | 8 ～ 20 | 6 ～ 20 | 6 ～ 16 | 6 | 4 | 6 | 4 | 4 | 4 ～ 6 | 4 ～ 6 |
| Underneck length (ℓ1)(mm) | 1.5 ～ 5 | - | - | 40 ～ 56 | - | - | - | - | - | 4 ～ 60 | 10 ～ 160.8 | 20 ～ 120 | 1 ～ 60 | - | 0.5 ～ 10 | - | - | 1 ～ 60 | 6 ～ 35 | 10 ～ 36 | 6 ～ 54 | 5 ～ 30 | 2 ～ 48 | 1.5 ～ 6 | 2 ～ 16.65 | 2.5 ～ 12 | - | - | - | - | - | - | 15 ～ 42 | - | - | - | - | 18 ～ 42 | - | - | - | - | - | - | - |
| Machining Application | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove |
| Coating | TiAlN | TiAlN | TiAlN | DLC | Non-Coated | For High Hardness (Silicon Group) | Non-Coated | Dia Coat | DLC | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | Non-Coated | Non-Coated | TiAlN | TiAlN | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | For High Hardness (Silicon Group) | - | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | TiAlN | AlTiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Type | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | radius | radius | radius | radius | Tapered neck radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | High-Feed Radius | High-Feed Radius | radius | radius | radius |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | - | No torsion | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | - | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | No torsion | Standard torsion (30-40°) | Standard torsion (30-40°) |
| R Precision(μm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.005～-0.005 | 0.02～-0.02 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 | - | - | - | - | 0.005 to -0.005 ～ 0.01～-0.01 | - | 0～-0.01 | ±0.005 | 0～+0.04 | 0～+0.04 | 0～+0.04 | 0～+0.04 | - | - | - | 0.025～-0.025 | 0.025～-0.025 | 0.025～-0.025 | - | - | - | - | - | - | - | - | - |
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
R Size(mm)
- R0
- 0.02
- 0.03
- 0.05
- 0.1
- F0.12
- 0.15
- F0.16
- 0.2
- F0.2
- F0.24
- 0.25
- F0.28
- 0.3
- F0.32
- 0.4
- F0.4
- 0.5
- 0.5R
- 0.6
- 0.7
- 0.75
- 0.8
- 0.813
- 0.9
- 1
- 1R
- R1
- 1.1
- 1.2
- 1.219
- 1.3
- 1.4
- 1.5
- 1.5R
- R1.5
- 1.6
- 1.625
- 1.7
- 1.8
- 1.9
- 2
- 2R
- R2
- 2.031
- 2.1
- 2.2
- 2.3
- 2.4
- 2.438
- 2.465
- 2.5
- 2.5R
- R2.5
- 2.6
- 2.607
- 2.7
- 2.8
- 2.9
- 3
- R3
- 3.2
- 3.5
- 4
- R4
- 5
- R5
- 6
- R6
- 6.5
- 8
[0.1-3/0.1mm Unit(s)]
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 22
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 41
- 42
- 45
- 48
- 50
- 54
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Manufacturer
-
- OSG (19)
- KYOWA SEIKO (12)
- NS TOOL (8)
- UNION TOOL (8)
- DIJET (4)
- SANKO MFG (4)
- OKAZAKI SEIKO (3)
- NACHI (1)
- SPEED TIGER (1)
- SANDVIK (1)
- THE_CUT (1)
- MAPAL (0)
- ATOM (0)
- VAN_HOORN (0)
- GUHRING (0)
- TAIYO-TOOL (0)
- 7 LEADERS (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy