(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Long Neck Ball End Mills (Carbide)（work material：Stainless Steel）
| Days to Ship |
|
|---|
-
MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
MISUMI
High-performance MRC series is available in the industry's largest number of sizes
- Volume Discount
- MR
- General Steel
- 2 Flutes
- S (Short)
Standard Price: MYR 80.72- Days to Ship: 4 Day(s) or more -
CFLB, UT Coat 3-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· Provides amazing high feed compared to the conventional 2-flute long neck ball.
· With new UTCOAT, outstanding lubricity and long life are achieved.
· Designed with 3-flute variable split to reduce chatter, enabling high precision die cutting.
· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip design (excluding R0.75 and below)
· O.D. Tolerance: 0/-0.02Standard Price: MYR 185.80- Days to Ship: 5 Day(s) or more -
TSC series carbide long neck ball end mill, 2-flute / long neck model
MISUMI
[Features]
·Long neck shape suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 4 Day(s) or more -
UNION TOOL
[Features]
· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
· Supports a wide range from copper and raw materials to 55 HRC.Standard Price: MYR 121.09- Days to Ship: 9 Day(s) or more -
Long-Neck Ball End Mill (for Deep Ribs) NHB-2
NS TOOL
Supports three-dimensional precision deep engraving. Neck relief type suitable to narrow deep processing
Standard Price: MYR 286.90- Days to Ship: 5 Day(s) or more -
TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
MISUMI
A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
MISUMI
[Features]
·High stiffness 2-flute type with length taper shape
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: MYR 172.60- Days to Ship: 4 Day(s) or more -
TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
MISUMI
[Features]
·High-feed, high stiffness 3-flute taper shape with taper length
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck ball end mill, 3-flute / long neck model
MISUMI
[Features]
·Long neck ball 3-flute type suitable for high-feed machining of deep cutting areas
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck ball end mill, 4-flute / long neck model
MISUMI
[Features]
·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
Days to Ship: 4 Day(s) or more -
TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
MISUMI
[Features]
·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
·Taper neck is effective in suppressing chattering
·Machining of high hardness steel up to 65HRC is possible
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Standard Price: MYR 300.69- Days to Ship: 4 Day(s) or more -
XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model
MISUMI
A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: MYR 70.84- Days to Ship: 2 Day(s) or more -
Long Neck Ball Type, 2-Flute WXL-HS-LN-EBD
OSG
WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas
Standard Price: MYR 133.51- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute FX-LN-EBD-6
OSG
Ball end mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.
Standard Price: MYR 602.44- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD
OSG
Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.
Standard Price: MYR 115.75- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute WXL-LN-EBD
OSG
The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.
Standard Price: MYR 101.02- Days to Ship: 5 Day(s) or more -
Long Neck Ball Type, 2-Flute WX-LN-EBD
OSG
A long neck ball where the effective length can be selected to suit the machining shape. The high toughness carbide base material achieves stable cutting for a wide range of processing.
Standard Price: MYR 209.97- Days to Ship: 5 Day(s) or more -
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionStandard Price: MYR 102.60- Days to Ship: 7 Day(s) or more -
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionStandard Price: MYR 113.12- Days to Ship: 7 Day(s) or more -
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
[Features]
· Long Shank Ball End Middle Series Supporting High-Hardness Materials
· Uses HardMax coating compatible with high-speed machining of high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: MYR 408.93- Days to Ship: 7 Day(s) or more -
HLB, HM Coat, 2-Flute Long Neck Ball End Mill
UNION TOOL
[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applicationsStandard Price: MYR 109.61- Days to Ship: 7 Day(s) or more -
HTNB HM coat 2-flute taper neck ball end mill
UNION TOOL
[Features]
· High rigidity realized through an improved taper neck shape.
· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
· 65 HRC high hardness materials can also be cutStandard Price: MYR 222.50- Days to Ship: 5 Day(s) or more -
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](//my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]
UNION TOOL
[Features]
· 3-flute type achieves remarkably high feed. Shortens the roughing time
· Deep cutting is possible, enabling high efficiency machining even with shape processing where feeding speed cannot be increased
· Designed with 3-flute variable split to suppress chatter.
· It uses UTCOAT and can support a wide range from raw materials through low/medium hardness materials up to 55 HRC
· Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip shape (excluding R0.75 and below)Standard Price: MYR 191.74- Days to Ship: 5 Day(s) or more -
MRBH230 Long-Neck Ball, Hard (for High Hardness)
NS TOOL
The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface
Standard Price: MYR 123.93- Days to Ship: 5 Day(s) or more -
MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)
NS TOOL
Long Neck Ball End Mill for Short Shank Type (supports shrink fit)
Standard Price: MYR 138.51- Days to Ship: 11 Day(s) -
MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill
NS TOOL
The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products
Standard Price: MYR 196.32- Days to Ship: 5 Day(s) or more -
MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
NS TOOL
Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds
Standard Price: MYR 117.88- Days to Ship: 10 Day(s) or more -
UT COAT 2-Flute Long-Neck Ball CSLEB
UNION TOOL
[Features]
· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
· Supports a wide range from copper and raw materials to 55 HRC.Standard Price: MYR 111.98- Days to Ship: 6 Day(s) or more -
HM Coated 2-flute, Long Neck Ball HSLB
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflectionStandard Price: MYR 100.50- Days to Ship: 7 Day(s) or more -
CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Standard Price: MYR 771.08- Days to Ship: 10 Day(s) -
Carbide 2-Flute Long Ball End Mill 30° B242X
7 LEADERS
[Features]
· 2-flute long shank ball end mill that supports a wide range of work materials.
· Capable of continuous stable cutting.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.Standard Price: MYR 129.74- Days to Ship: 5 Day(s) or more -
Carbide 2-Flute Ultra Long Ball End Mill 30° B246X
7 LEADERS
[Features]
· 2-flute ultra-long shank ball end mill that supports a wide range of work materials.
· Capable of continuous stable cutting.
· Nanoparticle multilayer coating.
· Suitable for a wide range of work materials from general steel to high hardness steel.Standard Price: MYR 301.49- Days to Ship: 6 Day(s) or more -
MRBLN230-6 MUGEN COATING Long Neck Ball End Mill ⌀6 Shank Diameter Type (For Deep Ribbing)
NS TOOL
[Features]
· NS original deep ribbing end mill with MUGEN coating applied.
· Neck relief type suitable for narrow deep processing.Standard Price: MYR 451.57- Days to Ship: 5 Day(s) or more
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_b$)
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| R Precision(μm) |
| Machining Application |
| Coating |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | UNION TOOL | MISUMI | UNION TOOL | NS TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | UNION TOOL | UNION TOOL | SANDVIK | 7 LEADERS | 7 LEADERS | NS TOOL |
| Product Series | MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model | TSC series carbide long neck ball end mill, 2-flute / long neck model | TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model | TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model | TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model | TSC series carbide long neck ball end mill, 3-flute / long neck model | TSC series carbide long neck ball end mill, 4-flute / long neck model | TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model | XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model | HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product] | CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product] | MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting) | MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing) | CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC) | MRBLN230-6 MUGEN COATING Long Neck Ball End Mill ⌀6 Shank Diameter Type (For Deep Ribbing) | ||||||||||||||||||
| CAD |
|
|
|
|
| ||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 11 Day(s) | 5 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 10 Day(s) | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||
| R Size(mm) | 0.05 ～ 3 | 0.3 ～ 3 | 0.05 ～ 3 | 0.1 ～ 5 | 0.4 ～ 3 | 0.5 ～ 5 | 0.15 ～ 5 | 0.5 ～ 3 | 0.5 ～ 3 | 1 ～ 3 | 0.75 ～ 3 | 0.05 ～ 3 | 0.3 ～ 1.5 | 0.25 ～ 3 | 0.1 ～ 3 | 0.05 ～ 3 | 0.1 ～ 3 | 0.03 ～ 6 | 0.1 ～ 0.75 | 1.5 ～ 6 | 0.4 ～ 3 | 0.1 ～ 2 | 0.3 ～ 6 | 0.05 ～ 3 | 0.1 ～ 1.5 | 0.1 ～ 2 | 0.05 ～ 3 | 0.05 ～ 3 | 0.05 ～ 3 | 0.2 ～ 0.5 | 1.5 ～ 10 | 1 ～ 6 | 0.15 ～ 1 |
| Blade length (ℓ)(mm) | 0.07 ～ 6 | 0.48 ～ 4.8 | 0.07 ～ 8 | 0.3 ～ 15 | 0.6 ～ 6 | - | 0.3 ～ 8 | 0.8 ～ 6 | 0.8 ～ 4.8 | 1.6 ～ 6 | 1.2 ～ 4.8 | 0.07 ～ 6 | 0.5 ～ 2.4 | 0.5 ～ 6 | 0.16 ～ 4.8 | 0.08 ～ 6 | 0.16 ～ 4.8 | 0.06 ～ 15 | 0.3 ～ 2.5 | 4.5 ～ 25 | 0.64 ～ 4.8 | 0.16 ～ 50 | 0.9 ～ 18 | 0.07 ～ 6 | 0.15 ～ 2.5 | 0.2 ～ 4 | 0.07 ～ 6 | 0.08 ～ 4.8 | 0.08 ～ 4.8 | 0.3 ～ 1 | 6 ～ 38 | 4 ～ 22 | 0.3 ～ 2 |
| Underneck length (ℓ1)(mm) | 0.2 ～ 60 | 2 ～ 40 | 0.2 ～ 60 | - | 6 ～ 50 | 4 ～ 55 | 2 ～ 60 | 7 ～ 60 | 3 ～ 50 | 4 ～ 30 | 20 ～ 50 | 0.2 ～ 60 | 1.5 ～ 12 | 2.5 ～ 30 | 0.5 ～ 40 | 0.3 ～ 50 | 0.5 ～ 50 | - | - | - | 3 ～ 30 | 1.5 ～ 62 | - | 0.2 ～ 50 | 0.5 ～ 20 | 1 ～ 60 | 0.3 ～ 50 | 0.3 ～ 60 | 0.3 ～ 60 | 1 ～ 10 | - | - | 3 ～ 20 |
| Shank diameter (d)(mm) | 4 ～ 6 | 4 ～ 6 | 3 ～ 8 | 4 ～ 10 | 4 ～ 6 | 6 ～ 10 | 4 ～ 12 | 4 ～ 8 | 4 ～ 6 | 4 ～ 6 | 4 ～ 8 | 3 ～ 6 | 4 | 6 | 4 ～ 6 | 3 ～ 6 | 4 ～ 6 | 4 ～ 12 | 4 | 3 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 | 4 ～ 8 | 4 ～ 6 | 4 ～ 6 | 3 ～ 6 | 6 | 4 ～ 20 | 3 ～ 12 | - |
| Number of flutes(sheet) | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 3 | 2 ～ 3 | 4 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 50 ～ 110 | 50 ～ 90 | 40 ～ 110 | 50 ～ 100 | 45 ～ 120 | 70 ～ 90 | 50 ～ 110 | 50 ～ 110 | 50 ～ 110 | 50 ～ 70 | 70 ～ 110 | 50 ～ 110 | 35 ～ 40 | 60 ～ 90 | 45 ～ 90 | 45 ～ 120 | 45 ～ 120 | 50 ～ 100 | 50 | 80 ～ 200 | 45 ～ 80 | 4 ～ 120 | 50 ～ 120 | 45 ～ 120 | 35 ～ 50 | 50 ～ 110 | 45 ～ 120 | 45 ～ 120 | 45 ～ 120 | 54 ～ 57 | 80 ～ 210 | 100 ～ 210 | - |
| work material | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] |
| R Precision(μm) | ±0.005 | -0.007～0.007 ～ -0.005～0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007～0.007 ～ -0.005～0.005 | 0.01～-0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.005～+0.005 | -0.005～+0.005 | -0.005～+0.005 | -0.005～+0.005 | -0.01～+0.01 | -0.007～0.007 ～ -0.002～0.002 | -0.005～0.005 | -0.007～0.007 ～ -0.005～0.005 | -0.002～0.002 | -0.005～0.005 | -0.01～0.01 ～ -0.005～0.005 | 0.005～-0.005 | 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | 0.005～-0.005 ～ 0.01～-0.01 | -0.005～0.005 ～ -0.002～0.002 | -0.005～0.005 ～ -0.002～0.002 | - | ±10 | ±10 | -0.01 to 0.01 |
| Machining Application | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface | Curved surface / Engraving / R Groove | Curved surface / Engraving / R Groove | Curved surface |
| Coating | MRC | TiCN | For High Hardness (Silicon Group) | TiCN | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.) | TiCN | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | TiCN | For High Hardness (Silicon Group) | Other | - | - | TiAlN |
| Type | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Long-Neck Ball | Long-Neck Ball / Spherical Ball | Tapered neck ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Ball | Long-Neck Ball | Tapered neck ball | Ball | Long-Neck Ball | Long-Neck Ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Long-Neck Ball |
![HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439081.jpg?$product_view_c$)
![CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]](http://my.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439586.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
R Size(mm)
- 0.03
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.15
- R0.15
- 0.2
- R0.2
- 0.25
- R0.25
- 0.3
- R0.3
- 0.35
- 0.4
- R0.4
- 0.45
- 0.5
- R0.5
- 0.55
- 0.6
- 0.65
- R0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- R0.9
- 0.95
- 1
- R1
- 1.25
- R1.25
- 1.5
- R1.5
- 1.75
- R1.75
- 2
- R2
- 2.25
- R2.25
- 2.5
- R2.5
- 2.75
- R2.75
- 3
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5.25
- 5.5
- R5.5
- 5.75
- 6
- R6
- 8
- 10
-
Blade length (ℓ)(mm)
-
0.06～0.96
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 2.8
- 2.9
-
3～3.85
- 3
- 3.2
- 3.5
- 3.7
- 3.75
- 3.85
-
4～4.8
- 4
- 4.2
- 4.5
- 4.8
-
5～5.3
- 5
- 5.2
- 5.3
-
6～6.7
- 6
- 6.7
-
7～7.5
- 7
- 7.5
-
8～8.2
- 8
- 8.2
-
9
-
10～10.5
- 10
- 10.5
-
11
-
12
-
13～13.5
- 13
- 13.5
-
14
-
15
-
16.5
-
18
-
20
-
22
-
25
-
30
-
35
-
38
-
40
-
45
-
50
-
55
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
R Precision(μm)
-
Machining Application
-
Coating
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Narrow search by specifying Manufacturer
-
- UNION TOOL (10)
- NS TOOL (6)
- OSG (5)
- 7 LEADERS (2)
- SANDVIK (1)
- KYOWA SEIKO (0)
- NACHI (0)
- EIKOSHA (0)
CAD
-
- 2D
- 3D
Related Categories to Long Neck Ball End Mills (Carbide)
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy